The UEFI specification defines PXE_CPB_TRANSMIT.DataLen as excluding
the length of the media header. iPXE currently fills in DataLen as
the whole frame length (including the media header), along with
placing the media header length separately in MediaheaderLen. On some
UNDI implementations (observed using a VMware ESXi 7.0b virtual
machine), this causes transmitted packets to include 14 bytes of
trailing garbage.
Match the behaviour of the EDK2 SnpDxe driver, which fills in DataLen
as the whole frame length (including the media header) and leaves
MediaheaderLen as zero. This behaviour also violates the UEFI
specification, but is likely to work in practice since EDK2 is the
reference implementation.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The malloc_dma() function allocates memory with specified physical
alignment, and is typically (though not exclusively) used to allocate
memory for DMA.
Rename to malloc_phys() to more closely match the functionality, and
to create name space for functions that specifically allocate and map
DMA-capable buffers.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The legacy transmit descriptor index is not reset by anything short of
a full device reset. This can cause the legacy transmit ring to stall
after closing and reopening the device, since the hardware and
software indices will be out of sync.
Fix by performing a reset after closing the interface. Do this only
if operating in legacy mode, since in C+ mode the reset is not
required and would undesirably clear additional state (such as the C+
command register itself).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Commit 87e39a9c9 ("[efi] Split efi_usb_path() out to a separate
function") unintentionally introduced an undefined symbol reference
from efi_path.o to usb_depth(), causing the USB subsystem to become a
dependency of all EFI builds.
Fix by converting usb_depth() to a static inline function.
Reported-by: Pico Mitchell <pico@randomapplications.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some UEFI BIOSes (observed with at least the Insyde UEFI BIOS on a
Microsoft Surface Go) provide a very broken version of the
UsbMassStorageDxe driver that is incapable of binding to the standard
EFI_USB_IO_PROTOCOL instances and instead relies on an undocumented
proprietary protocol (with GUID c965c76a-d71e-4e66-ab06-c6230d528425)
installed by the platform's custom version of UsbCoreDxe.
The upshot is that USB mass storage devices become inaccessible once
iPXE's native USB host controller drivers are loaded.
One possible workaround is to load a known working version of
UsbMassStorageDxe (e.g. from the EDK2 tree): this driver will
correctly bind to the standard EFI_USB_IO_PROTOCOL instances exposed
by iPXE. This workaround is ugly in practice, since it involves
embedding UsbMassStorageDxe.efi into the iPXE binary and including an
embedded script to perform the required "chain UsbMassStorageDxe.efi".
Provide a native USB mass storage driver for iPXE, allowing USB mass
storage devices to be exposed as iPXE SAN devices.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
For USB mass storage devices, we do not want to submit more bulk IN
packets than are required for the inbound data, since this will waste
memory.
Allow an upper limit to be specified on each refill attempt. The
endpoint will be refilled to the lower of this limit or the limit
specified by usb_refill_init().
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Closing and reopening a USB endpoint will clear any halt status
recorded by the host controller, but may leave the endpoint halted at
the device. This will cause the first packet submitted to the
reopened endpoint to be lost, before the automatic stall recovery
mechanism detects the halt and resets the endpoint.
This is relatively harmless for USB network or HID devices, since the
wire protocols will recover gracefully from dropped packets. Some
protocols (e.g. for USB mass storage devices) assume zero packet loss
and so would be adversely affected.
Fix by allowing any device endpoint halt status to be cleared on a
freshly opened endpoint.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
A zero divisor will currently lead to a 16-bit integer overflow when
calculating the transmit padding, and a potential division by zero if
assertions are enabled.
Avoid these problems by treating a divisor value of zero as equivalent
to a divisor value of one (i.e. no alignment requirements).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The current error handling mechanism defers the endpoint reset until
the next use of the endpoint, on the basis that errors are detected
during completions and completion handling should not recursively call
usb_poll().
In the case of usb_control(), we are already at the level that calls
usb_poll() and can therefore safely perform the endpoint reset
immediately. This has no impact on functionality, but does make
debugging traces easier to read since the reset will appear
immediately after the causative error.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
We currently use a heuristic to determine whether or not to request
cable detection in PXE_OPCODE_INITIALIZE, based on the need to work
around a known Emulex driver bug (see commit c0b61ba "[efi] Work
around bugs in Emulex NII driver") and the need to accommodate links
that are legitimately slow to come up (see commit 6324227 "[efi] Skip
cable detection at initialisation where possible").
This heuristic appears to fail with newer Emulex drivers. Attempt to
support all known drivers (past and present) by first attempting
initialisation with cable detection, then falling back to attempting
initialisation without cable detection.
Reported-by: Kwang Woo Lee <kwleeyh@gmail.com>
Tested-by: Kwang Woo Lee <kwleeyh@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
A failure in device registration (e.g. due to a device with malformed
descriptors) will currently result in the port being disabled as part
of the error path. This in turn causes the hardware to detect the
device as newly connected, leading to an endless loop of failed device
registrations.
Fix by leaving the port enabled in the case of a registration failure.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When connected to a USB3 port, the AX88179 seems to have an
approximately 50% chance of producing a USB transaction error on each
of its three endpoints after being closed and reopened. The root
cause is unclear, but rewriting the USB device configuration value
seems to clear whatever internal error state has accumulated.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Experimentation shows that the existing 20ms delay is insufficient,
and often results in device detection being deferred until after iPXE
has completed startup.
Fix by increasing the delay to 100ms.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The driver-private data for root hubs is already set immediately after
allocating the USB bus. There seems to be no reason to set it again
when opening the root hub.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The "disabled" port states for USB2 and USB3 are not directly
equivalent. In particular, a disabled USB3 port will not detect new
device connections. The result is that a USB3 device disconnected
from and reconnected to an xHCI root hub port will end up reconnecting
as a USB2 device.
Fix by setting the link state to RxDetect after disabling the port, as
is already done during initialisation.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The USB3 specification removes PORT_ENABLE from the list of features
that may be cleared via a CLEAR_FEATURE request. Experimentation
shows that omitting the attempt to clear PORT_ENABLE seems to result
in the correct hotplug behaviour.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Resetting the host endpoint may immediately restart any pending
transfers for that endpoint. If the device endpoint halt has not yet
been cleared, then this will probably result in a second failed
transfer.
This second failure may be detected within usb_endpoint_reset() while
waiting for usb_clear_feature() to complete. The endpoint will
subsequently be removed from the list of halted endpoints, causing the
second failure to be effectively ignored and leaving the host endpoint
in a permanently halted state.
Fix by deferring the host endpoint reset until after the device
endpoint is ready to accept new transfers.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The ASIX USB NICs are capable of autodetecting the Ethernet link speed
and reporting it via PLSR but will not automatically update the
relevant GM and PS bits in MSR. The result is that a non-gigabit link
will fail to send or receive any packets.
The interrupt endpoint used to report link state includes the values
of the PHY BMSR and LPA registers. These are not sufficient to
differentiate between 100Mbps and 1000Mbps, since the LPA_NPAGE bit
does not necessarily indicate that the link partner is advertising
1000Mbps.
Extend axge_check_link() to write the MSR value based on the link
speed read from PLSR, and simplify the interrupt endpoint handler to
merely trigger a call to axge_check_link().
Signed-off-by: Michael Brown <mcb30@ipxe.org>
GCC 10 emits warnings for implicit conversions of enumerated types.
The flexboot_nodnic code defines nodnic_queue_pair_type with values
identical to those of ib_queue_pair_type, and implicitly casts between
them. Add an explicit cast to fix the warning.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
GCC 10 produces a spurious warning about an out-of-bounds array access
for the unsized raw dword array in union intelvf_msg.
Avoid the warning by embedding the zero-length array within a struct.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some devices (observed with a Getac RX10 tablet and docking station
containing an embedded AX88179 USB NIC) seem to be capable of
detecting link state only during the call to Initialize(), and will
occasionally erroneously report that the link is down for the first
few such calls.
Work around these devices by retrying the Initialize() call multiple
times, terminating early if a link is detected. The eventual absence
of a link is treated as a non-fatal error, since it is entirely
possible that the link really is down.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
According to UEFI specification 2.8 p 24.1 we must set the
EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST bit in the "Disable" mask, when
"ResetMCastFilter" is TRUE.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Split-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Currently, if the SNP driver for whatever reason fails to enable
receive filters for multicast frames, it falls back to enabling just
unicast and broadcast filters. This breaks some IPv6 functionality as
the network card does not respond to neighbour solicitation requests.
Some cards refuse to enable EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST, but
do support enabling EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS_MULTICAST,
so try it before falling back to just unicast+broadcast.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Split-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
On devices with no EEPROM or OTP, the MAC_CR register defaults to not
using automatic link speed detection, with the result that no packets
are successfully sent or received.
Fix by always enabling automatic speed and duplex detection, since
iPXE provides no mechanism for manual configuration of either link
speed or duplex.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
On at least some platforms (observed with a Raspberry Pi), any attempt
to perform USB transfers via EFI_USB_IO_PROTOCOL during EFI shutdown
will lock up the system. This is quite probably due to the already
documented failure of all EFI timers when ExitBootServices() is
called: see e.g. commit 5cf5ffea2 "[efi] Work around temporal anomaly
encountered during ExitBootServices()".
Work around this problem by refusing to poll endpoints if shutdown is
in progress, and by immediately failing any attempts to enqueue new
transfers.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The USB core reuses the I/O buffer space occupied by the USB setup
packet to hold the completion status for message transfers, assuming
that the message() method will always strip the setup packet before
returning. This assumption is correct for all of the hardware
controller drivers (XHCI, EHCI, and UHCI), since these drivers are
able to enqueue the transfer as a separate action from waiting for the
transfer to complete.
The EFI_USB_IO_PROTOCOL does not allow us to separate actions in this
way: there is only a single blocking method that both enqueues and
waits for completion. Our usbio driver therefore currently defers
stripping the setup packet until the control endpoint is polled.
This causes a bug if a message transfer is enqueued but never polled
and is subsequently cancelled, since the cancellation will be reported
with the I/O buffer still containing the setup packet. This breaks
the assumption that the setup packet has been stripped, and triggers
an assertion failure in usb_control_complete().
Fix by always stripping the setup packet in usbio_endpoint_message(),
and adjusting usbio_control_poll() to match.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The physical function defaults to operating in "PXE mode" after a
power-on reset. In this mode, receive descriptors are fetched and
written back as single descriptors. In normal (non-PXE mode)
operation, receive descriptors are fetched and written back only as
complete cachelines unless an interrupt is raised.
There is no way to return to PXE mode from non-PXE mode, and there is
no way for the virtual function driver to operate in PXE mode.
Choose to operate in non-PXE mode. This requires us to trick the
hardware into believing that it is raising an interrupt, so that it
will not defer writing back receive descriptors until a complete
cacheline (i.e. four packets) have been consumed. We do so by
configuring the hardware to use MSI-X with a dummy target location in
place of the usual APIC register.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The virtual function driver will use the same transmit and receive
descriptor ring structures, but will not itself construct and program
the ring context. Split out ring creation and destruction from the
programming of the ring context, to allow code to be shared between
physical and virtual function drivers.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The virtual function transmit and receive ring tail register offsets
do not match those of the physical function. Allow the tail register
offsets to be specified separately.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The physical function driver does not allow the virtual function to
request the use of 16-byte receive descriptors. Switch to using
32-byte receive descriptors.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Provide a weak stub function for handling the "send to VF" event used
for communications between the physical and virtual function drivers.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The "send to PF" and "send to VF" admin queue descriptors (ab)use the
cookie field to hold the extended opcode and return code values.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
A virtual function reset is triggered via an admin queue command and
will reset the admin queue configuration registers. Allow the admin
queues to be reinitialised after such a reset, without requiring the
overhead (and potential failure paths) of freeing and reallocating the
queues.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
We currently use a single data buffer shared between all admin queue
descriptors. This works for the physical function driver since we
have at most one command in progress and only a single event (which
does not use a data buffer).
The communication path between the physical and virtual function
drivers uses the event data buffer, and there is no way to prevent a
solicited event (i.e. a response to a request) from being overwritten
by an unsolicited event (e.g. a link status change).
Provide individual data buffers for each admin event queue descriptor
(and for each admin command queue descriptor, for the sake of
consistency).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The register map for the virtual functions appears to have been
constructed using a random number generator.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The physical function driver does not allow the virtual function to
request that VLAN tags are left unstripped. Extract and use the VLAN
tag from the receive descriptor if present.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The Hermon driver uses vlan_find() to identify the appropriate VLAN
device for packets that are received with the VLAN tag already
stripped out by the hardware. Generalise this capability and expose
it for use by other network card drivers.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The Intel 40 Gigabit Ethernet virtual functions support only MSI-X
interrupts, and will write back completed interrupt descriptors only
when the device attempts to raise an interrupt (or when a complete
cacheline of receive descriptors has been completed).
We cannot actually use MSI-X interrupts within iPXE, since we never
have ownership of the APIC. However, an MSI-X interrupt is
fundamentally just a DMA write of a single dword to an arbitrary
address. We can therefore configure the device to "raise" an
interrupt by writing a meaningless value to an otherwise unused memory
location: this is sufficient to trigger the receive descriptor
writeback logic.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The first adapters in this family are X2522-10, X2522-25, X2541 and
X2542.
These no longer use PCI BAR 0 for I/O, but use that for memory. In
other words, BAR 2 on SFN8xxx adapters now becomes BAR 0.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Devices that support jumbo frames will currently default to the
largest possible MTU. This assumption is valid for virtual adapters
such as virtio-net, where the MTU must have been configured by a
system administrator, but is unsafe in the general case of a physical
adapter.
Default to the standard Ethernet MTU, unless explicitly overridden
either by the driver or via the ${netX/mtu} setting.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add the function mii_find() in order to locate the PHY address.
Signed-off-by: Sylvie Barlow <sylvie.c.barlow@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
We currently have no generic concept of a PHY address, since all
existing implementations simply hardcode the PHY address within the
MII access methods.
A bit-bashing MII interface will need to be provided with an explicit
PHY address in order to generate the correct waveform. Allow for this
by separating out the concept of a MII device (i.e. a specific PHY
address attached to a particular MII interface).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This is required to work around a bug in some firmware versions.
Signed-off-by: Ameer Mahagneh <ameerm@mellanox.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some drivers are known to call the optional Map_Mem() callback without
first checking that the callback exists. Provide a usable basic
implementation of Map_Mem() along with the other callbacks that become
mandatory if Map_Mem() is provided.
Note that in theory the PCI I/O protocol is allowed to require
multiple calls to Map(), with each call handling only a subset of the
overall mapped range. However, the reference implementation in EDK2
assumes that a single Map() will always suffice, so we can probably
make the same simplifying assumption here.
Tested with the Intel E3522X2.EFI driver (which, incidentally, fails
to cleanly remove one of its mappings).
Originally-implemented-by: Maor Dickman <maord@mellanox.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Remove the global variable shomron_nodnic_supported, since it may have
different values for different PCI devices.
Originally-fixed-by: Mohammed Taha <mohammedt@mellanox.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Reporting a completion via usb_complete() will pass control outside
the scope of xhci.c, and could potentially result in a further call to
xhci_event_poll() before returning from usb_complete(). Since we
currently update the event consumer counter only after calling
usb_complete(), this can result in duplicate completions and
consequent corruption of the submission TRB ring structures.
Fix by updating the event ring consumer counter before passing control
to usb_complete().
Reported-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Tested-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The i219 appears to have a seriously broken reset mechanism. After
any transmit or receive activity, resetting the card will break both
the transmit and receive datapaths until the next PCI bus reset.
The Linux and BSD drivers include a convoluted workaround authored by
Intel which involves setting a bit in the undocumented FEXTNVM11
register, then transmitting a dummy 512-byte packet containing garbage
data, then reconfiguring the receive descriptor prefetch thresholds
and temporarily reenabling the receive datapath. The comments in the
Intel fix do not even remotely match what the code actually does, and
the code accidentally leaves the transmitter enabled after use.
Experimentation suggests that an equivalent fix is to simply set the
undocumented bit in FEXTNVM11 before enabling the transmit or receive
descriptor rings.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Invalid protocol speed ID tables appear to be increasingly common in
the wild, to the point that it is infeasible to apply an explicit
XHCI_BAD_PSIV flag for each offending PCI device ID.
Fix by assuming an invalid PSI table as soon as any invalid value is
reported by the hardware.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some older versions of gcc (observed with gcc 4.7.2) report a spurious
uninitialised variable warning in ena_get_device_attributes(). Work
around this warning by manually inlining the relevant code (which has
only a single call site).
Reported-by: xbgmsharp <xbgmsharp@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Most drivers do not utilise an MII interface, since the link state is
typically available directly from a memory-mapped register.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The SnpDxe driver raises the task priority level to TPL_CALLBACK when
calling the UNDI entry point. This does not appear to be a documented
requirement, but we should probably match the behaviour of SnpDxe to
minimise surprises to third party code.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The tap driver can retrieve a potentially unlimited number of packets
in a single poll. This can lead to heap exhaustion under heavy load.
Fix by imposing an artificial receive quota (as already used in other
drivers without natural receive limits).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The UEFI specification has an implicit and demonstrably incorrect
requirement (in the Mem_IO() calling convention) that any UNDI network
device has at most one memory BAR and one I/O BAR.
Some UEFI platforms have been observed to report the existence of
non-existent additional I/O BARs, causing iPXE to select the wrong
BAR. This problem does not affect the SnpDxe driver, since that
driver will always choose the lowest numbered existent BAR of each
type.
Adjust iPXE's behaviour to match that of SnpDxe, i.e. to always select
the lowest numbered BAR(s).
Debugged-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Debugged-by: Adklei <adklei@realtek.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The LAN78xx datapath is essentially identical to that of the SMSC75xx.
Expose the transmit, poll, and bulk IN endpoint operations to allow
for reuse by the LAN78xx driver.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The LAN78xx PHY interrupt source and mask registers do not match those
used by the SMSC75xx and SMSC95xx.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Since we don't enable IOMMU at all, we can then simply enable the
IOMMU support by claiming the support of VIRITO_F_IOMMU_PLATFORM.
This fixes booting failure when iommu_platform is set from qemu cli.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The smsc75xx and smsc95xx drivers include a substantial amount of
identical functionality, varying only in the base address of register
sets. Abstract out this common functionality to allow code to be
shared between the drivers.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
We currently use a zero language ID to retrieve strings such as the
ECM/NCM MAC address. This works on most hardware devices, but is
known to fail on some software emulated CDC-NCM devices.
Fix by using the first supported language ID, falling back to English
(0x0409) if any error occurs when fetching the list of supported
languages. This matches the behaviour of the Linux kernel.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The Xen network backend (xen-netback) suffered from a regression
between upstream Linux kernels 3.18 and 4.2 inclusive, which would
cause packet reception to fail unless at least 18 receive buffers were
available. This bug was fixed in kernel commit 1d5d485 ("xen-netback:
require fewer guest Rx slots when not using GSO").
Work around this bug in affected versions of xen-netback by providing
the requisite 18 receive buffers.
Reported-by: Taylor Schneider <tschneider@live.com>
Tested-by: Taylor Schneider <tschneider@live.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Commit 7cfdd76 ("[block] Describe all SAN devices via ACPI tables")
changed the definition of the iSCSI initiator IQN in the iBFT to
represent a common initiator IQN used for all iSCSI sessions, and
attempted to calculate this common initiator IQN by fetching the
common ${initiator-iqn} setting.
This fails when no explicit ${initiator-iqn} has been specified
(i.e. when an initiator IQN has instead been constructed from either
the hostname or system UUID), and results in an empty initiator IQN in
the iBFT.
Fix by using the initiator IQN of an arbitrary iSCSI session
present in the iBFT.
Debugged-by: Tal Aloni <tal.aloni.il@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
An "enlightened" external bootloader (such as Windows Server 2016's
winload.exe) may take ownership of the Hyper-V connection before all
INT 13 operations have been completed. When this happens, all VMBus
devices are implicitly closed and we are left with a non-functional
network connection.
Detect when our Hyper-V connection has been lost (by checking the
SynIC message page MSR). Reclaim ownership of the Hyper-V connection
and reestablish any VMBus devices, without disrupting any existing
iPXE state (such as IPv4 settings attached to the network device).
Windows Server 2016 will not cleanly take ownership of an active
Hyper-V connection. Experimentation shows that we can quiesce by
resetting only the SynIC message page MSR; this results in a
successful SAN boot (on a Windows 2012 R2 physical host). Choose to
quiesce by resetting (almost) all MSRs, in the hope that this will be
more robust against corner cases such as a stray synthetic interrupt
occurring during the handover.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
On most Intel NICs, Auto-Speed Detection Enable (ASDE) can be used to
automatically detect the correct link speed by sampling the link using
the internal PHY. This feature is automatically inhibited when not
appropriate for the physical link (e.g. when using internal SerDes
mode on the 8254x).
On the i350 datasheet ASDE is a reserved bit, but the relevant
auto-speed detection hardware appears still to be present. However,
enabling ASDE on the i350 1000BASE-KX backplane NIC seems to cause an
immediate link failure. It is possible that the auto-speed detection
hardware is still present, is not connected to a physical link, and is
not inhibited from being applied in this mode.
Work around this problem by adding an INTEL_NO_ASDE flag bit
(analogous to INTEL_NO_PHY_RST), and applying this for the i350
backplane NIC.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
In situations where iPXE fails to reach link-up as expected, it is
useful to know the original values of the CTRL and STATUS registers
prior to our reset attempt.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Following changes were introduced:
- added GetBgxProp and GetLmacProp methods to ThunderxConfigProtocol
- replaced direct BOARD_CFG access with usage of introduced methods
- removed redundant BOARD_CFG
- changed GUID of ThunderxConfigProtocol, as this is not compatible
with previous version
- changed UINTN* to UINT64* buffer type to fix issue on 32-bit
platforms with MAC address
This change allows us to avoid alignment of BOARD_CFG definitions
every time it changes in UEFI.
Signed-off-by: Konrad Adamczyk <konrad.adamczyk@cavium.com>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The TEST UNIT READY command is issued automatically when the device is
opened, and is not the result of a command being issued by the caller.
This is required in order that a permanent TEST UNIT READY failure can
be used to identify unusable paths in a multipath SAN device.
Since the TEST UNIT READY command is not part of the caller's command
issuing process, it is not covered by any external retry loops (such
as the main retry loop in sandev_command()).
We must therefore be prepared to retry the TEST UNIT READY command
within the SCSI layer itself. We retry only the TEST UNIT READY
command so as not to multiply the number of potential retries for
normal commands (which are already retried by sandev_command()).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Describe all SAN devices via ACPI tables such as the iBFT. For tables
that can describe only a single device (i.e. the aBFT and sBFT), one
table is installed per device. For multi-device tables (i.e. the
iBFT), all devices are described in a single table.
An underlying SAN device connection may be closed at the time that we
need to construct an ACPI table. We therefore introduce the concept
of an "ACPI descriptor" which enables the SAN boot code to maintain an
opaque pointer to the underlying object, and an "ACPI model" which can
build tables from a list of such descriptors. This separates the
lifecycles of ACPI descriptions from the lifecycles of the block
device interfaces, and allows for construction of the ACPI tables even
if the block device interface has been closed.
For a multipath SAN device, iPXE will wait until sufficient
information is available to describe all devices but will not wait for
all paths to connect successfully. For example: with a multipath
iSCSI boot iPXE will wait until at least one path has become available
and name resolution has completed on all other paths. We do this
since the iBFT has to include IP addresses rather than DNS names. We
will commence booting without waiting for the inactive paths to either
become available or close; this avoids unnecessary boot delays.
Note that the Linux kernel will refuse to accept an iBFT with more
than two NIC or target structures. We therefore describe only the
NICs that are actually required in order to reach the described
targets. Any iBFT with at most two targets is therefore guaranteed to
describe at most two NICs.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When the TEST UNIT READY command receives an error response, the
shutdown of the command's block data interface will result in
scsidev_ready() closing the SCSI device. This will subsequently
result in a duplicate call to scsicmd_close(), leading to an assertion
failure when list_del() is called for the second time.
Fix by removing the command from the list of outstanding commands
before shutting down the command's interfaces.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
B0_CTST is a 24bit register according to the vendor driver (sk98lin).
A 16bit read on B0_CTST will always return 0 for Y2_VAUX_AVAIL
(1<<16), so use a 32bit read when testing Y2_VAUX_AVAIL.
[This patch is copied directly from the Linux kernel tree.]
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The value of ( ( x & 0x0c00 ) | 0x0c00 ) is always 0x0c00 regardless
of the value of x, and so the read_csr() is redundant. (There are no
read side effects for this register, according to the datasheet.)
This line of code originated in Linux kernel 2.3.19pre1 as
a->write_csr(ioaddr, 80, a->read_csr(ioaddr, 80) | 0x0c00);
and was modified in kernel 2.3.41pre4 to read
a->write_csr(ioaddr, 80, (a->read_csr(ioaddr, 80) & 0x0C00) | 0x0c00);
In the absence of commit messages, the intention of the code is
unclear. However, the logic resulting in a fixed value of 0x0c00 has
remained unaltered for over 17 years, and can probably be assumed to
have the correct overall result.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Any underlying errors arising during ib_create_cq() or ib_create_qp()
are lost since the functions simply return NULL on error. This makes
debugging harder, since a debug-enabled build is required to discover
the root cause of the error.
Fix by returning a status code from these functions, thereby allowing
any underlying errors to be propagated.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Report errors in eoib_duplicate() via netdev_tx_err() rather than
netdev_tx_complete_err(), since netdev_tx_complete_err() accepts only
valid I/O buffers that are currently in the network device's transmit
queue.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When the area to be mapped straddles the 2GB boundary, the expression
(high+size) will overflow on the first loop iteration. Fix by using
(end-size), which cannot underflow.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When the area to be mapped straddles the 2GB boundary, the expression
(high+size) will overflow on the first loop iteration. Fix by using
(end-size), which cannot underflow.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
We currently request cable detection in PXE_OPCODE_INITIALIZE to work
around buggy Emulex drivers (see commit c0b61ba ("[efi] Work around
bugs in Emulex NII driver")).
This causes problems with some other NII drivers (e.g. Mellanox),
which may time out if the underlying link is intrinsically slow to
come up.
Attempt to work around both problems simultaneously by requesting
cable detection only if the underlying NII driver does not support
link status reporting via PXE_OPCODE_GET_STATUS. (This is based on a
potentially incorrect assumption that the buggy Emulex drivers do not
claim to report link status via PXE_OPCODE_GET_STATUS.)
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Several files define the ARRAY_SIZE() macro as used in Linux. Provide
a common definition for this in include/compiler.h.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some VF data is not cleared with reset, so make sure to return all the
settings to default before configuring the VF.
This fixes an issue where network packets would fail to be received if
the VF was previously used by the linux ixgbevf driver.
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When a SCSI device is closed in error, the shutdown of the device's
block data interface will probably lead to any outstanding commands
being closed (by whichever object is currently connected to the block
data interface). However, commands remain in the list of outstanding
commands until the final reference is dropped. The result is that
scsidev_close() will make a second call to scsicmd_close() for each
command. This is harmless, but produces confusing debug messages.
Fix by treating the outstanding command list as holding an explicit
reference to each command, and removing the command from the list of
outstanding commands in scsicmd_close().
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The SCSI layer currently implements a retry loop in order to retry
commands that fail due to spurious "error" conditions such as "power
on occurred". Move this retry loop to the generic SAN device layer:
this allow for retries due to other transient error conditions such as
an iSCSI target having dropped the connection due to inactivity.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
According to ThunderX Errata G-17560, NIC_PF_CFG[ENA] bit should not
be cleared at exit. This allows other drivers to access the NIC regs
correctly.
Signed-off-by: Konrad Adamczyk <konrad.adamczyk@cavium.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
It is required to reset BGX context state for the LMAC using
BGX_CMR_CONFIG register.
This solves problem with network connectivity in Linux booted from
iPXE.
Signed-off-by: Bartosz Szczepanek <bartosz.szczepanek@cavium.com>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Originally-implemented-by: Malte zu Klampen <malte@pclab.ifg.uni-kiel.de>
Originally-implemented-by: Richard Moore <rich@richud.com>
Tested-by: Esben Storgaard Nielsen <esn@solar.dk>
Signed-off-by: Christian Nilsson <nikize@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow the active timer (providing udelay() and currticks()) to be
selected at runtime based on probing during the INIT_EARLY stage of
initialisation.
TICKS_PER_SEC is now a fixed compile-time constant for all builds, and
is independent of the underlying clock tick rate. We choose the value
1024 to allow multiplications and divisions on seconds to be converted
to bit shifts.
TICKS_PER_MS is defined as 1, allowing multiplications and divisions
on milliseconds to be omitted entirely. The 2% inaccuracy in this
definition is negligible when using the standard BIOS timer (running
at around 18.2Hz).
TIMER_RDTSC now checks for a constant TSC before claiming to be a
usable timer. (This timer can be tested in KVM via the command-line
option "-cpu host,+invtsc".)
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some host implementations (notably Google Compute Platform) are known
to unconditionally write back VIRTIO_NET_HDR_F_DATA_VALID to
header->flags for received packets, regardless of the features
negotiated by the driver. This breaks the transmit datapath by
effectively setting an illegal flag for all subsequent transmitted
packets.
Work around this problem by using separate empty header buffers for
the receive and transmit queues.
Debugged-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This code largely inspired by tap.c. Allows for testing iPXE on real
NICs from within Linux. For example:
make bin-x86_64-linux/af_packet.linux
valgrind ./bin-x86_64-linux/af_packet.linux --net af_packet,if=eth3
Tested as x86_64 and i386 binary.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Virtio 0.9 implementation was limited to the maximum virtqueue size of
MAX_QUEUE_NUM and the virtio-net driver would fail to initialize on hosts
exceeding this limit.
This commit lifts the restriction by allocating the queue memory based on
the actual queue size instead of using a fixed maximum. Note that virtio
1.0 still uses the MAX_QUEUE_NUM constant to cap the size (unfortunately
this functionality is not available in virtio 0.9).
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This commit introduces virtnet_free_virtqueues called on all virtqueue
error and shutdown paths. vpm_find_vqs no longer cleans up after itself
and instead expects virtnet_free_virtqueues to be always called to undo
its effect.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
vpm_find_vqs incorrectly accepted the host provided queue size with no
regard to iPXE's internal limitations. Virtio 1.0 makes it possible for
the driver to override the queue size to reduce memory requirements and
iPXE is a great use case for this feature.
Also removing the extra vq->vring.num assignment which is already
handled in vring_init.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Updates:
- Nodnic: Support for arm cq doorbell via the UAR BAR
- Ensure hardware is quiescent when no interface is open - WinPE WA
- Support for clear interrupt via BAR
- Nodnic: Support for send TX doorbells via the UAR BAR
- Added ConnectX-5EX device
- Added ConnectX-5 device
Signed-off-by: Raed Salem <raeds@mellanox.com>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Commit db34436 ("[intel] Strip spurious VLAN tags received by virtual
function NICs") accidentally introduced two copies of the
intel[x]vf_mbox_queues() function. Remove the unintended copy.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The physical function may be configured to transparently insert a VLAN
tag into all transmitted packets. Unfortunately, it does not
equivalently strip this same VLAN tag from all received packets. This
behaviour may be observed in some Amazon EC2 instances with Enhanced
Networking enabled: transmissions work as expected but all packets
received by iPXE appear to have a spurious VLAN tag.
We can configure the receive queue to strip VLAN tags via the
RXDCTL.VME bit. We need to find out from the PF driver whether or not
we should do so.
There exists a "get queue configuration" mailbox message which
contains a field labelled IXGBE_VF_TRANS_VLAN in the Linux driver.
A comment in the Linux PF driver describes this field as "notify VF of
need for VLAN tag stripping, and correct queue". It will be filled
with a non-zero value if the PF is enforcing the use of a single VLAN
tag. It will also be filled with a non-zero value if the PF is using
multiple traffic classes.
The Linux VF driver seems to treat this field as being simply the
number of traffic classes, and gives it no VLAN-related
interpretation. The Linux VF driver instead handles the VLAN tag
stripping by simply assuming that any unrecognised VLAN tag ought to
be silently dropped.
We choose to strip and ignore the VLAN tag if the IXGBE_VF_TRANS_VLAN
field has a non-zero value.
Reported-by: Leonid Vasetsky <leonidv@velostrata.com>
Tested-by: Leonid Vasetsky <leonidv@velostrata.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iPXE debug logging doesn't support %u. This commit replaces it with
%d in virtio-pci debug format strings.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
ARM64 has a weaker memory order model than x86. The missing memory
barrier caused phy initialization notification to be delayed beyond
the link-wait timeout (15 secs).
Signed-off-by: Leendert van Doorn <leendert@paramecium.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Extend the 16-bit PCI bus:dev.fn address to a 32-bit seg🚌dev.fn
address, assuming a segment value of zero in contexts where multiple
segments are unsupported by the underlying data structures (e.g. in
the iBFT or BOFM tables).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This backport is from linux kernel upstream commit 83d6f1f ("ath9k:
fix buffer overrun for ar9287").
Signed-off-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The UEFI specification requires the EFI_SIMPLE_NETWORK_PROTOCOL
GetStatus() method to set TxBuf to NULL if there are no transmit
buffers to recycle.
Some implementations (observed with Lan9118Dxe in EDK2) fill in TxBuf
only when there is a transmit buffer to recycle, which leads to large
numbers of "spurious TX completion" errors.
Work around this problem by initialising TxBuf to NULL before calling
the GetStatus() method.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Commit 86f96a4 ("[tg3] Remove x86-specific inline assembly")
introduced a regression in _tg3_flag() in 64-bit builds, since any
flags in the upper 32 bits of a 64-bit unsigned long would be
discarded when truncating to a 32-bit int.
Debugged-by: Shane Thompson <shane.thompson@aeontech.com.au>
Tested-by: Shane Thompson <shane.thompson@aeontech.com.au>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This commit makes virtio-net support devices with VEN 0x1af4 and DEV
0x1041, which is how non-transitional (modern-only) virtio-net devices
are exposed on the PCI bus.
Transitional devices supporting both the old 0.9.5 and new 1.0 version
of the virtio spec are driven using the new protocol. Legacy devices
are driven using the old protocol, same as before this commit.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This commit adds support for driving virtio 1.0 PCI devices. In
addition to various helpers, a number of vpm_ functions are introduced
to be used instead of their legacy vp_ counterparts when accessing
virtio 1.0 (aka modern) devices.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Virtio 1.0 introduces new constants and data structures, common to all
devices as well as specific to virtio-net. This commit adds a subset
of these to be able to drive the virtio-net 1.0 network device.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
PCI devices may support more capabilities of the same type (for
example PCI_CAP_ID_VNDR) and there was no way to discover all of them.
This commit adds a new API pci_find_next_capability which provides
this functionality. It would typically be used like so:
for (pos = pci_find_capability(pci, PCI_CAP_ID_VNDR);
pos > 0;
pos = pci_find_next_capability(pci, pos, PCI_CAP_ID_VNDR)) {
...
}
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
There is no way for the hardware to give us an invalid length in the
LRH, since it must have parsed this length field in order to perform
header splitting. However, this is difficult to prove conclusively.
Add an unnecessary length check to explicitly reject any packets
larger than the posted receive I/O buffer.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
There is no way for the hardware to give us an invalid length in the
LRH, since it must have parsed this length field in order to perform
header splitting. However, this is difficult to prove conclusively.
Add an unnecessary length check to explicitly reject any packets
larger than the posted receive I/O buffer.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some versions of gcc complain that "'__bswap_variable_32' is static
but used in inline function 'golan_check_rc_and_cmd_status' which is
not static".
Fix by making golan_check_rc_and_cmd_status() a static inline.
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The Infiniband specification (volume 1, section 11.4.1.2 "Post Receive
Request") notes that for UD QPs, the GRH will be placed in the first
40 bytes of the receive buffer if present. (If no GRH is present,
which is normal, then the first 40 bytes of the receive buffer will be
unused.)
Mellanox hardware performs this placement automatically: other headers
will be stripped (and their values returned via the CQE), but the
first 40 bytes of the data buffer will be consumed by the (probably
non-existent) GRH.
This does not fit neatly into iPXE's internal abstraction, which
expects the data buffer to represent just the data payload with the
addresses from the GRH (if present) passed as additional parameters to
ib_complete_recv().
The end result of this discrepancy is that attempts to receive
full-sized 2048-byte IPoIB packets on Mellanox hardware will fail.
Fix by allocating a separate ring buffer to hold the received GRHs.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown
Rob Taglang
Ben Bleything
Andrew Grasso
LaDerrick H
Joseph Wong
Ignat Korchagin
Mohammed
Christian Nilsson
Martin Habets
Steven Haber
Sylvie Barlow
Rob Taglang
Ameer Mahagneh
Janos Mattyasovszky
Peter von Konigsmark
Richard Moore
Jason Wang
Jerone Young
Mika Tiainen
Adamczyk, Konrad
Mike McCormack
Raed Salem
Vishvananda Ishaya
Bartosz Szczepanek
David Decotigny
Ladi Prosek
Lukas Grossar
Leendert van Doorn
Christian Hesse
Wissam Shoukair