Separate the return status code from the returned PCI bus:dev.fn
address, in order to allow pci_find_next() to be used to find devices
with a non-zero PCI segment number.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Experience suggests that routers are often misconfigured to advertise
SLAAC even on prefixes that do not have a SLAAC-compatible prefix
length. iPXE will currently treat this as an error, resulting in the
prefix being ignored completely.
Handle this misconfiguration by ignoring the autonomous address flag
when the prefix length is unsuitable for SLAAC.
Reported-by: Malte Janduda <mail@janduda.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some versions of the ENA hardware (observed on a c6i.large instance in
eu-west-2) seem to require a receive ring containing at least 128
entries: any smaller ring will never see receive completions or will
stall after the first few completions.
Increase the receive ring size to 128 entries (determined empirically)
for compatibility with these hardware versions. Limit the receive
ring fill level to 16 (as at present) to avoid consuming more memory
than will typically be available in the internal heap.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some versions of the ENA firmware (observed on a c6i.large instance in
eu-west-2) seem to require a host information page, without which the
CREATE_CQ command will fail with ENA_ADMIN_UNKNOWN_ERROR.
These firmware versions also seem to require us to claim that we are a
Linux kernel with a specific driver major version number. This
appears to be a firmware bug, as revealed by Linux kernel commit
1a63443af ("net/amazon: Ensure that driver version is aligned to the
linux kernel"): this commit changed the value of the driver version
number field to be the Linux kernel version, and was hastily reverted
in commit 92040c6da ("net: ena: fix broken interface between ENA
driver and FW") which clarified that the version number field does
actually have some undocumented significance to some versions of the
firmware.
Fix by providing a host information page via the SET_FEATURE command,
incorporating the apparently necessary lies about our identity.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some versions of the ENA firmware (observed on a c6i.large instance in
eu-west-2) will complain if the completion queue's MSI-X vector field
is left empty, even though the queue configuration specifies that
interrupts are not used.
Work around these firmware versions by passing in what appears to be
the magic "no MSI-X vector" value in this field.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The ENA data path design has separate submission and completion
queues. Submission queues must be refilled in strict order (since
there is only a single linear tail pointer used to communicate the
existence of new entries to the hardware), and completion queue
entries include a request identifier copied verbatim from the
submission queue entry. Once the submission queue doorbell has been
rung, software never again reads from the submission queue entry and
nothing ever needs to write back to the submission queue entry since
completions are reported via the separate completion queue.
This design allows the hardware to complete submission queue entries
out of order, provided that it internally caches at least as many
entries as it leaves gaps.
Record and identify I/O buffers by request identifier (using a
circular ring buffer of unique request identifiers), and remove the
assumption that submission queue entries will be completed in order.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The CREATE_CQ command is permitted to return a size smaller than
requested, which could leave us in a situation where the completion
queue could overflow.
Avoid overflow by limiting the submission queue fill level to the
actual size of the completion queue.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Current versions of the E810 PF driver fail to set the number of
in-use queue pairs in response to the CONFIG_VSI_QUEUES message. When
the number of in-use queue pairs is less than the number of available
queue pairs, this results in some packets being directed to
nonexistent receive queues and hence silently dropped.
Work around this PF driver bug by explicitly configuring the number of
available queue pairs via the REQUEST_QUEUES message. This message
triggers a VF reset that, in turn, requires us to reopen the admin
queue and issue an additional GET_RESOURCES message to restore the VF
to a functional state.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The RESET_VF admin queue command does not complete via the usual
mechanism, but instead requires us to poll registers to wait for the
reset to take effect and then reopen the admin queue.
Allow for the existence of other admin queue commands that also
trigger a VF reset, by separating out the logic that waits for the
reset to complete.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Negotiate API version 1.1 in order to allow access to virtual function
opcodes that are disallowed by default on the E810.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add a driver for the E810 family of 100 Gigabit Ethernet NICs. The
core datapath is identical to that of the 40 Gigabit XL710, and this
part of the code is shared between both drivers. The admin queue
mechanism is sufficiently similar to make it worth reusing substantial
portions of the code, with separate implementations for several
commands to handle the (unnecessarily) breaking changes in data
structure layouts. The major differences are in the mechanisms for
programming queue contexts (where the E810 abandons TX/RX symmetry)
and for configuring the transmit scheduler and receive filters: these
portions are sufficiently different to justify a separate driver.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Remove knowledge of the PRTGL_SA[HL] registers, and instead use the
admin queue to set the MAC address and maximum frame size.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Remove knowledge of the PRTPM_SA[HL] registers, and instead use the
admin queue to retrieve the MAC address.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow for the MAC address to be fetched using an admin queue command,
instead of reading the PRTPM_SA[HL] registers directly.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The PRTGL_SAH register contains the current maximum frame size, and is
not guaranteed on reset to contain the actual maximum frame size
supported by the hardware, which the datasheet specifies as 9728 bytes
(including the 4-byte CRC).
Set the maximum packet size to a hardcoded 9728 bytes instead of
reading from the PRTGL_SAH register.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Remove knowledge of the GLLAN_RCTL_0 register (which changes location
between the XL810 and E810 register maps), and instead unconditionally
issue the "clear PXE mode" command with the EEXIST error silenced.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The "clear PXE mode" admin queue command will return an EEXIST error
if the device is already in non-PXE mode, but there is no other admin
queue command that can be used to determine whether the device has
already been switched into non-PXE mode.
Provide a mechanism to allow expected errors from a command to be
silenced, to allow the "clear PXE mode" command to be cleanly used
without needing to first check the GLLAN_RCTL_0 register value.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
At least one E810 admin queue command (Query Default Scheduling Tree
Topology) insists upon being provided with a 4kB data buffer, even
when the data to be returned is much smaller.
Work around this requirement by increasing the admin queue data buffer
size to 4kB.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Move knowledge of the virtual function data structures and admin
command definitions from intelxl.h to intelxlvf.h.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Remove the large static admin data buffer structure embedded within
struct intelxl_nic, and instead copy the response received via the
"send to VF" admin queue event to the (already consumed and completed)
admin command descriptor and data buffer.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The physical and virtual function drivers each care about precisely
one admin queue event type. Simplify event handling by using a
per-driver callback instead of the existing weak function symbol.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The PCI device ID 8086:1889 is for the Intel Ethernet Adaptive Virtual
Function, which is a generic virtual function that can be exposed by
different generations of Intel hardware.
Rename the PCI ID from "xl710-vf-ad" to "iavf" to reflect that the
driver is not XL710-specific.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The E810 requires that receive descriptor rings have at least 64
entries (and are a multiple of 32 entries).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Do not attempt to use the admin commands to get the firmware version
and report the driver version for the virtual function driver, since
these will be rejected by the E810 firmware as invalid commands when
issued by a virtual function. Instead, use the mailbox interface to
negotiate the API version with the physical function driver.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The 100 Gigabit physical function driver requires a virtual function
driver to request that transmit and receive queues are mapped to MSI-X
vector 1 or higher.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The second parameter to intelxlvf_admin_queues() is a boolean used to
select the VF opcode, rather than the raw VF opcode itself.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Remove knowledge of the PFGEN_CTRL register (which changes location
between XL710 and E810 register maps), and instead use PCIe FLR to
reset the physical function.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Use the tail register offset (which exists for all ring types) as the
ring identifier in all relevant debug messages.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
For the sake of completeness, ensure that all 32 bytes of the receive
queue context are programmed (including the unused final 8 bytes).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Commit 8f3e648 ("[intelxl] Use one admin queue buffer per admin queue
descriptor") changed the API for intelxl_admin_command() such that the
caller now constructs the command directly within the next available
descriptor ring entry, rather than relying on intelxl_admin_command()
to copy the descriptor to and from the descriptor ring.
This introduced a regression in intelxl_admin_switch(), since the
second and subsequent iterations of the loop will not have constructed
a valid command in the new descriptor ring entry before calling
intelxl_admin_command().
Fix by constructing the command within the loop.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Expose the system MAC address (if any) via the ${sysmac} setting.
This allows scripts to access the system MAC address even when iPXE
has decided not to apply it to a network device (e.g. because the
cached DHCPACK MAC address was selected in order to match the
behaviour of a previous boot stage).
The setting is named ${sysmac} rather than ${acpimac} in order to
allow for forward compatibility with non-ACPI mechanisms that may
exist in future for specifying a system MAC address.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When running on a system with an ACPI-provided system-specific MAC
address, iPXE will apply this address to an ECM or NCM USB NIC. If
iPXE has been chainloaded from a previous stage that does not
understand the ACPI MAC mechanism then this can result in iPXE using a
different MAC address than the previous stage, which is surprising to
users.
Attempt to minimise surprise by allowing the MAC address found in a
cached DHCPACK packet to override a temporary MAC address, if the
DHCPACK MAC address matches the network device's permanent MAC
address. When a previous stage has chosen to use the network device's
permanent MAC address (e.g. because it does not understand the ACPI
MAC mechanism), this will cause iPXE to make the same choice.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When applying an ACPI-provided system-specific MAC address, apply it
to netdev->ll_addr rather than netdev->hw_addr. This allows iPXE
scripts to access the permanent MAC address via the ${netX/hwaddr}
setting (and thereby provides scripts with a mechanism to ascertain
that the NIC is using a MAC address other than its own permanent
hardware address).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some newer HP products expose the host-based MAC (HBMAC) address using
an ACPI method named "RTMA" returning a part-binary string of the form
"_RTXMAC_#<mac>#", where "<mac>" comprises the raw MAC address bytes.
Extend the existing support to handle this format alongside the older
"_AUXMAC_" format (which uses a base16-encoded MAC address).
Reported-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Tested-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
For symmetry with the stub user_to_phys() implementation, provide
phys_to_user() with the same underlying assumption that virtual
addresses are physical (since there is no way to know the real
physical address when running as a Linux userspace executable).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow for linked-in code to override the mechanism used to locate an
ACPI table, thereby opening up the possibility of ACPI self-tests.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Extend the glyph cache to include a number of dynamic entries that are
populated on demand whenever a non-ASCII character needs to be drawn.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Accumulate UTF-8 characters in fbcon_putchar(), and require the frame
buffer console's .glyph() method to accept Unicode character values.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
We currently define the active DNS server as a global variable. All
queries will start by attempting to contact the active DNS server, and
the active DNS server will be changed only if we fail to get a
response. This effectively treats the DNS server list as expressing a
weak preference ordering: we will try servers in order, but once we
have found a working server we will stick with that server for as long
as it continues to respond to queries.
Some sites are misconfigured to hand out DNS servers that do not have
a consistent worldview. For example: the site may hand out two DNS
server addresses, the first being an internal DNS server (which is
able to resolve names in private DNS domains) and the second being a
public DNS server such as 8.8.8.8 (which will correctly return
NXDOMAIN for any private DNS domains). This type of configuration is
fundamentally broken and should never be used, since any DNS resolver
performing a query for a name within a private DNS domain may obtain a
spurious NXDOMAIN response for a valid private DNS name.
Work around these broken configurations by treating the DNS server
list as expressing a strong preference ordering, and always starting
DNS queries from the first server in the list (rather than maintaining
a global concept of the active server). This will have the debatable
benefit of converting permanent spurious NXDOMAIN errors into
transient spurious NXDOMAIN errors, which can at least be worked
around at a higher level (e.g. by retrying a download in a loop within
an iPXE script).
The cost of always starting DNS queries from the first server in the
list is a slight delay introduced when the first server is genuinely
unavailable. This should be negligible in practice since DNS queries
are relatively infrequent and the failover expiry time is short.
Treating the DNS server list as a preference ordering is permitted by
the language of RFC 2132, which defines DHCP option 6 as a list in
which "[DNS] servers SHOULD be listed in order of preference". No
specification defines a precise algorithm for how this preference
order should be applied in practice: this new approach seems as good
as any.
Requested-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The BIOS console's interpretation of LShift+RShift as equivalent to
AltGr requires the shifted ASCII characters to be present in the AltGr
mapping table, to allow AltGr-Shift-<key> to be interpreted in the
same way as AltGr-<key>.
For keyboard layouts that have different ASCII characters for
AltGr-<key> and AltGr-Shift-<key>, this will potentially leave the
character for AltGr-<key> inaccessible via the BIOS console if the
BIOS requires the use of the LShift+RShift workaround. This
theoretically affects the numeric keys in the Lithuanian ("lt")
keyboard layout (where the numerals are accessed via AltGr-<key> and
punctuation characters via AltGr-Shift-<key>), but the simple
workaround for that keyboard layout is to avoid using AltGr and Shift
entirely since the unmodified numeric keys are not remapped anyway.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Provide the special keyboard map named "dynamic" which allows the
active keyboard map to be selected at runtime via the ${keymap}
setting, e.g.:
#define KEYBOARD_MAP dynamic
iPXE> set keymap uk
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Settings applicators are entirely independent, and there is no reason
why a failure in one applicator should prevent other applicators from
being processed.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
As reported by Coverity, xsmp_rx_xve_modify() currently passes a
partially initialised struct ib_address_vector to xve_update_tca() and
thence to eoib_set_gateway(), which uses memcpy() to store the whole
structure including the (unused and unneeded) uninitialised fields.
Silence the Coverity warning by zeroing the whole structure.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
As per the general pattern for initialisation functions in iPXE,
pci_init() saves code size by assuming that the caller has already
zeroed the underlying storage (e.g. as part of zeroing a larger
containing structure). There are several places within the code where
pci_init() is deliberately used to initialise a transient struct
pci_device without zeroing the entire structure, because the calling
code knows that only the PCI bus:dev.fn address is required to be
initialised (e.g. when reading from PCI configuration space).
Ensure that using pci_init() followed by pci_read_config() will fully
initialise the struct pci_device even if the caller did not previously
zero the underlying storage, since Coverity reports that there are
several places in the code that rely upon this.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Embedded images do not have an associated URI. This currently causes
the current working URI (cwuri) to be cleared when starting an
embedded image.
If the current working URI has been set via a ${next-server} setting
from a cached DHCP packet then this will result in unexpected
behaviour. An attempt by the embedded script to use a relative URI to
download files from the TFTP server will fail with the error:
Could not start download: Operation not supported (ipxe.org/3c092083)
Rerunning the "dhcp" command will not fix this error, since the TFTP
settings applicator will not see any change to the ${next-server}
setting and so will not reset the current working URI.
Fix by setting the current working URI to the image's URI only if the
image actually has an associated URI.
Debugged-by: Ignat Korchagin <ignat@cloudflare.com>
Originally-fixed-by: Ignat Korchagin <ignat@cloudflare.com>
Tested-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The AltGr remapping table is constructed to include only keys that are
not reachable after applying the basic remapping table. The logic
currently fails to include keys that are omitted entirely from the
basic remapping table since they would map to a non-ASCII character.
Fix this logic by allowing the remapping tables to include null
mappings, which are then elided only at the point of constructing the
C code fragment.
Reported-by: Christian Nilsson <nikize@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The build process currently invokes the Python genkeymap.py script via
the Perl executable. Strangely, this appears to work.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Treat dead keys in target keymaps as producing the closest equivalent
ASCII character, since many of these characters are otherwise
unrepresented on the keyboard.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Several keyboard layouts define ASCII characters as accessible only
via the AltGr modifier. Add support for this modifier to ensure that
all ASCII characters are accessible.
Experiments suggest that the BIOS console is likely to fail to
generate ASCII characters when the AltGr key is pressed. Work around
this limitation by accepting LShift+RShift (which will definitely
produce an ASCII character) as a synonym for AltGr.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Handle Ctrl and CapsLock key modifiers within key_remap(), to provide
consistent behaviour across different console types.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Separate the concept of a keyboard mapping from a list of remapped
keys, to allow for the possibility of supporting multiple keyboard
mappings at runtime.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The compound statement expression within __table_entries() prevents
the use of top-level declarations such as
static struct thing *things = table_start ( THINGS );
Define TABLE_START() and TABLE_END() macros that can be used as:
static TABLE_START ( things_start, THINGS );
static struct thing *things = things_start;
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The key with scancode 86 appears in the position between left shift
and Z on a US keyboard, where it typically fails to exist entirely.
Most US keyboard maps define this nonexistent key as generating "\|",
with the notable exception of "loadkeys" which instead reports it as
generating "<>". Both of these mapping choices duplicate keys that
exist elsewhere in the map, which causes problems for our ASCII-based
remapping mechanism.
Work around these quirks by treating the key as generating "\|" with
the high bit set, and making it subject to remapping. Where the BIOS
generates "\|" as expected, this allows us to remap to the correct
ASCII value.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Rewrite genkeymap.pl in Python with added sanity checks, and update
the list of keyboard mappings to remove those no longer supported by
the underlying "loadkeys" tool.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some keyboard layouts (e.g. "fr") swap letter and punctuation keys.
Apply the logic for upper and lower case and for Ctrl-<key> only after
applying remapping, in order to handle these layouts correctly.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
To minimise code size, our keyboard mapping works on the basis of
allowing the BIOS to convert the keyboard scancode into an ASCII
character and then remapping the ASCII character.
This causes problems with keyboard layouts such as "fr" that swap the
shifted and unshifted digit keys, since the ASCII-based remapping will
spuriously remap the numeric keypad (which produces the same ASCII
values as the digit keys).
Fix by checking that the keyboard scancode is within the range of keys
that vary between keyboard mappings before attempting to remap the
ASCII character.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
AArch64 kernels tend to be distributed as gzip compressed images.
Enable IMAGE_GZIP by default for AArch64 to avoid the need for
uncompressed images to be provided.
Originally-implemented-by: Alessandro Di Stefano <aleskandro@redhat.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
In real mode, code segments are always writable. In protected mode,
code segments can never be writable. The precise implementation of
this attribute differs between CPU generations, with subtly different
behaviour arising on the transitions from protected mode to real mode.
At the point of transition (when the PE bit is cleared in CR0) the
hidden portion of the %cs descriptor will retain whatever attributes
were in place for the protected-mode code segment, including the fact
that the segment is not writable. The immediately following code will
perform a far control flow transfer (such as ljmp or lret) in order to
load a real-mode value into %cs.
On the Pentium and later CPUs, the retained protected-mode attributes
will be ignored for any accesses via %cs while the CPU is in real
mode. A write via %cs will therefore be allowed even though the
hidden portion of the %cs descriptor still describes a non-writable
segment.
On the 486 and earlier CPUs, the retained protected-mode attributes
will not be ignored for accesses via %cs. A write via %cs will
therefore cause a CPU fault. To obtain normal real-mode behaviour
(i.e. a writable %cs descriptor), special logic is added to the ljmp
instruction that populates the hidden portion of the %cs descriptor
with real-mode attributes when a far jump is executed in real mode.
The result is that writes via %cs will cause a CPU fault until the
first ljmp instruction is executed, after which writes via %cs will be
allowed as expected in real mode.
The transition code in libprefix.S currently uses lret to load a
real-mode value into %cs after clearing the PE bit. Experimentation
shows that only the ljmp instruction will work to load real-mode
attributes into the hidden portion of the %cs descriptor: other far
control flow transfers (such as lret, lcall, or int) do not do so.
When running on a 486 or earlier CPU, this results in code within
libprefix.S running with a non-writable code segment after a mode
transition, which in turn results in a CPU fault when real-mode code
in liba20.S attempts to write to %cs:enable_a20_method.
Fix by constructing and executing an ljmp instruction, to trigger the
relevant descriptor population logic on 486 and earlier CPUs. This
ljmp instruction is constructed on the stack, since the .prefix
section may be executing directly from ROM (or from memory that the
BIOS has write-protected in order to emulate an ISA ROM region) and so
cannot be modified.
Reported-by: Nikolai Zhubr <n-a-zhubr@yandex.ru>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Attempt to fetch the autoexec.ipxe script via TFTP using the PXE base
code protocol installed on the loaded image's device handle, if
present.
This provides a generic alternative to the use of an embedded script
for chainloaded binaries, which is particularly useful in a UEFI
Secure Boot environment since it allows the script to be modified
without the need to sign a new binary.
As a side effect, this also provides a third method for breaking the
PXE chainloading loop (as an alternative to requiring an embedded
script or custom DHCP server configuration).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
RFC3986 allows for colons to appear within the path component of a
relative URI, but iPXE will currently parse such URIs incorrectly by
interpreting the text before the colon as the URI scheme.
Fix by checking for valid characters when identifying the URI scheme.
Deliberately deviate from the RFC3986 definition of valid characters
by accepting "_" (which was incorrectly used in the iPXE-specific
"ib_srp" URI scheme and so must be accepted for compatibility with
existing deployments), and by omitting the code to check for
characters that are not used in any URI scheme supported by iPXE.
Reported-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
SBAT defines an encoding for security generation numbers stored as a
CSV file within a special ".sbat" section in the signed binary. If a
Secure Boot exploit is discovered then the generation number will be
incremented alongside the corresponding fix.
Platforms may then record the minimum generation number required for
any given product. This allows for an efficient revocation mechanism
that consumes minimal flash storage space (in contrast to the DBX
mechanism, which allows for only a single-digit number of revocation
events to ever take place across all possible signed binaries).
Add SBAT metadata to iPXE EFI binaries to support this mechanism.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
As of commit f1e9e2b ("[efi] Align EFI image sections by page size"),
the VirtualSize fields for the .reloc and .debug sections have been
rounded up to the (4kB) image alignment. This breaks the PE
relocation logic in the UEFI shim, which requires the VirtualSize
field to exactly match the size as recorded in the data directory.
Fix by setting the VirtualSize field to the unaligned size of the
section, as is already done for normal PE sections (i.e. those other
than .reloc and .debug).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The RFC4122 specification defines UUIDs as being in network byte
order, but an unfortunately significant amount of (mostly Microsoft)
software treats them as having the first three fields in little-endian
byte order.
In an ideal world, any server-side software that compares UUIDs for
equality would perform an endian-insensitive comparison (analogous to
comparing strings for equality using a case-insensitive comparison),
and would therefore not care about byte order differences.
Define a setting type name ":guid" to allow a UUID setting to be
formatted in little-endian order, to simplify interoperability with
server-side software that expects such a formatting.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The UEFI specification mandates that the EFI watchdog timer should be
disabled by the platform firmware as part of the ExitBootServices()
call, but some platforms (e.g. Hyper-V) are observed to occasionally
forget to do so, resulting in a reboot approximately five minutes
after starting the operating system.
Work around these firmware bugs by disabling the watchdog timer
ourselves.
Requested-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Tested-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
On some systems (observed with the Thunderbolt ports on a ThinkPad X1
Extreme Gen3 and a ThinkPad P53), if the IOMMU is enabled then the
system firmware will install an ExitBootServices notification event
that disables bus mastering on the Thunderbolt xHCI controller and all
PCI bridges, and destroys any extant IOMMU mappings. This leaves the
xHCI controller unable to perform any DMA operations.
As described in commit 236299b ("[xhci] Avoid DMA during shutdown if
firmware has disabled bus mastering"), any subsequent DMA operation
attempted by the xHCI controller will end up completing after the
operating system kernel has reenabled bus mastering, resulting in a
DMA operation to an area of memory that the hardware is no longer
permitted to access and, on Windows with the Driver Verifier enabled,
a STOP 0xE6 (DRIVER_VERIFIER_DMA_VIOLATION).
That commit avoids triggering any DMA attempts during the shutdown of
the xHCI controller itself. However, this is not a complete solution
since any attached and opened USB device (e.g. a USB NIC) may
asynchronously trigger DMA attempts that happen to occur after bus
mastering has been disabled but before we reset the xHCI controller.
Avoid this problem by installing our own ExitBootServices notification
event at TPL_NOTIFY, thereby causing it to be invoked before the
firmware's own ExitBootServices notification event that disables bus
mastering.
This unsurprisingly causes the shutdown hook itself to be invoked at
TPL_NOTIFY, which causes a fatal error when later code attempts to
raise the TPL to TPL_CALLBACK (which is a lower TPL). Work around
this problem by redefining the "internal" iPXE TPL to be variable, and
set this internal TPL to TPL_NOTIFY when the shutdown hook is invoked.
Avoid calling into an underlying SNP protocol instance from within our
shutdown hook at TPL_NOTIFY, since the underlying SNP driver may
attempt to raise the TPL to TPL_CALLBACK (which would cause a fatal
error). Failing to shut down the underlying SNP device is safe to do
since the underlying device must, in any case, have installed its own
ExitBootServices hook if any shutdown actions are required.
Reported-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Tested-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add the "--uefi" option when invoking isohybrid on an EFI-bootable
image, to create a partition mapping to the EFI system partition
embedded within the ISO image.
This allows the resulting isohybrid image to be booted on UEFI systems
that will not recognise an El Torito boot catalog on a non-CDROM
device.
Originally-fixed-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The efi_unload() function is currently missing the calls to raise and
restore the TPL. This has the side effect of causing iPXE to return
from the driver unload entry point at TPL_CALLBACK, which will cause
unexpected behaviour (typically a system lockup) shortly afterwards.
Fix by adding the missing calls to raise and restore the TPL.
Debugged-by: Petr Borsodi <petr.borsodi@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The EFI loaded image protocol allows an image to be provided with a
custom system table, and we currently use this mechanism to wrap any
boot services calls made by the loaded image in order to provide
strace-like debugging via DEBUG=efi_wrap.
The ExitBootServices() call will modify the global system table,
leaving the loaded image using a system table that is no longer
current. When DEBUG=efi_wrap is used, this generally results in the
machine locking up at the point that the loaded operating system calls
ExitBootServices().
Fix by modifying the global EFI system table to point to our wrapper
functions, instead of providing a custom system table via the loaded
image protocol.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
A successful call to ExitBootServices() will result in the EFI console
becoming unusable. Ensure that the EFI wrapper produces a complete
line of debug output before calling the wrapped ExitBootServices()
method, and attempt subsequent debug output only if the call fails.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
On some systems (observed with the Thunderbolt ports on a ThinkPad X1
Extreme Gen3 and a ThinkPad P53), the system firmware will disable bus
mastering on the xHCI controller and all PCI bridges at the point that
ExitBootServices() is called if the IOMMU is enabled. This leaves the
xHCI controller unable to shut down cleanly since all commands will
fail with a timeout.
Commit 85eb961 ("[xhci] Allow for permanent failure of the command
mechanism") allows us to detect that this has happened and respond
cleanly. However, some unidentified hardware component (either the
xHCI controller or one of the PCI bridges) seems to manage to enqueue
the attempted DMA operation and eventually complete it after the
operating system kernel has reenabled bus mastering. This results in
a DMA operation to an area of memory that the hardware is no longer
permitted to access. On Windows with the Driver Verifier enabled,
this will result in a STOP 0xE6 (DRIVER_VERIFIER_DMA_VIOLATION).
Work around this problem by detecting when bus mastering has been
disabled, and immediately failing the device to avoid initiating any
further DMA attempts.
Reported-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iPXE decodes any percent-encoded characters during the URI parsing
stage, thereby allowing protocol implementations to consume the raw
field values directly without further decoding.
When reconstructing a URI string for use in an HTTP request line, the
percent-encoding is currently reapplied in a reversible way: we
guarantee that our reconstructed URI string could be decoded to give
the same raw field values.
This technically violates RFC3986, which states that "URIs that differ
in the replacement of a reserved character with its corresponding
percent-encoded octet are not equivalent". Experiments show that
several HTTP server applications will attach meaning to the choice of
whether or not a particular character was percent-encoded, even when
the percent-encoding is unnecessary from the perspective of parsing
the URI into its component fields.
Fix by storing the originally encoded substrings for the path, query,
and fragment fields and using these original encoded versions when
reconstructing a URI string. The path field is also stored as a
decoded string, for use by protocols such as TFTP that communicate
using raw strings rather than URI-encoded strings. All other fields
(such as the username and password) continue to be stored only in
their decoded versions since nothing ever needs to know the originally
encoded versions of these fields.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some xHCI controllers (observed with the Thunderbolt ports on a
ThinkPad X1 Extreme Gen3 and a ThinkPad P53) seem to suffer a
catastrophic failure at the point that ExitBootServices() is called if
the IOMMU is enabled. The symptoms appear to be consistent with
another UEFI driver (e.g. the IOMMU driver, or the Thunderbolt driver)
having torn down the DMA mappings, leaving the xHCI controller unable
to write to host memory. The observable effect is that all commands
fail with a timeout, and attempts to abort command execution similarly
fail since the xHCI controller is unable to report the abort
completion.
Check for failure to abort a command, and respond by performing a full
device reset (as recommended by the xHCI specification) and by marking
the device as permanently failed.
Reported-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Realistic Linux kernel command lines may exceed our current 256
character limit for interactively edited commands or settings.
Switch from stack allocation to heap allocation, and increase the
limit to 1024 characters.
Requested-by: Matteo Guglielmi <Matteo.Guglielmi@dalco.ch>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Use the "system MAC address" provided within the DSDT/SSDT if such an
address is available and has not already been assigned to a network
device.
Tested-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some vendors provide a "system MAC address" within the DSDT/SSDT, to
be used to override the MAC address for a USB docking station.
A full implementation would require an ACPI bytecode interpreter,
since at least one OEM allows the MAC address to be constructed by
executable ACPI bytecode (rather than a fixed data structure).
We instead attempt to extract a plausible-looking "_AUXMAC_#.....#"
string that appears shortly after an "AMAC" or "MACA" signature. This
should work for most implementations encountered in practice.
Debugged-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow for the DSDT/SSDT signature-scanning and value extraction code
to be reused for extracting a pass-through MAC address.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Commit cd3de55 ("[efi] Record cached DHCPACK from loaded image's
device handle, if present") added the ability for a chainloaded UEFI
iPXE to reuse an IPv4 address and DHCP options previously obtained by
a built-in PXE stack, without needing to perform a second DHCP
request.
Extend this to also record the cached ProxyDHCPOFFER and PXEBSACK
obtained from the EFI_PXE_BASE_CODE_PROTOCOL instance installed on the
loaded image's device handle, if present.
This allows a chainloaded UEFI iPXE to reuse a boot filename or other
options that were provided via a ProxyDHCP or PXE boot server
mechanism, rather than by standard DHCP.
Tested-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When building an EFI ROM image for which no PCI vendor/device ID is
applicable (e.g. bin-x86_64-efi/ipxe.efirom), the build process will
currently construct a command such as
./util/efirom -v -d -c bin-x86_64-efi/ipxe.efidrv \
bin-x86_64-efi/ipxe.efirom
which gets interpreted as a vendor ID of "-0xd" (i.e. 0xfff3, after
truncation to 16 bits).
Fix by using an explicit zero ID when no applicable ID exists, as is
already done when constructing BIOS ROM images.
Reported-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The DHCP service in EC2 has been observed to occasionally stop
responding for bursts of several seconds. This can easily result in a
failed boot, since the current cloud boot script will attempt DHCP
only once.
Work around this problem by retrying DHCP in a fairly tight cycle
within the cloud boot script, and falling back to a reboot after
several failed DHCP attempts.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
As of commit f1e9e2b ("[efi] Align EFI image sections by page size"),
our SectionAlignment has been increased to 4kB in order to allow for
page-level memory protection to be applied by the UEFI firmware, with
FileAlignment left at 32 bytes.
The PE specification states that the value for FileAlignment "should
be a power of 2 between 512 and 64k, inclusive", and that "if the
SectionAlignment is less than the architecture's page size, then
FileAlignment must match SectionAlignment".
Testing shows that signtool.exe will reject binaries where
FileAlignment is less than 512, unless FileAlignment is equal to
SectionAlignment. This indicates a somewhat zealous interpretation of
the word "should" in the PE specification.
Work around this interpretation by increasing FileAlignment from 32
bytes to 512 bytes, and add explanatory comments for both
FileAlignment and SectionAlignment.
Debugged-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When building the Linux userspace binaries, the external system
headers may have already defined values for the __LITTLE_ENDIAN and
__BIG_ENDIAN constants.
Fix by retaining the existing values if already defined, since the
actual values of these constants do not matter.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
RFC 3986 section 3.1 defines URI schemes as case-insensitive (though
the canonical form is always lowercase).
Use strcasecmp() rather than strcmp() to allow for case insensitivity
in URI schemes.
Requested-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The RTL8211B seems to have a bug that prevents the link from coming up
unless the MII_MMD_DATA register is cleared.
The Linux kernel driver applies this workaround (in rtl8211b_resume())
only to the specific RTL8211B PHY model, along with a matching
workaround to set bit 9 of MII_MMD_DATA when suspending the PHY.
Since we have no need to ever suspend the PHY, and since writing a
zero ought to be harmless, we just clear the register unconditionally.
Debugged-by: Nikolay Pertsev <nikolay.p@cos.flag.org>
Tested-by: Nikolay Pertsev <nikolay.p@cos.flag.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The peer discovery time has a significant impact on the overall
PeerDist download speed, since each block requires an individual
discovery attempt. In most cases, a peer that responds for block N
will turn out to also respond for block N+1.
Assume that the most recently discovered peer (for any block) probably
has a copy of the next block to be discovered, thereby allowing the
peer download attempt to begin immediately.
In the case that this assumption is incorrect, the existing error
recovery path will allow for fallback to newly discovered peers (or to
the origin server).
Suggested-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Tested-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some versions of GNU objcopy (observed with binutils 2.23.52.0.1 on
CentOS 7.0.1406) document the -D/--enable-deterministic-archives
option but fail to recognise the short form of the option.
Work around this problem by using the long form of the option.
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Commit 040cdd0 ("[linux] Add a prefix to all symbols to avoid future
name collisions") unintentionally reintroduced an element of
non-determinism into the build ID, by omitting the -D option when
manipulating the blib.a archive.
Fix by adding the -D option to restore determinism.
Reworded-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The Ip4ConfigDxe driver bug that was observed on Dell systems in
commit 64b4452 ("[efi] Blacklist the Dell Ip4ConfigDxe driver") has
also been observed on systems with a manufacturer name of "Itautec
S.A.". The symptoms of the bug are identical: an attempt to call
DisconnectController() on the LOM device handle will lock up the
system.
Fix by extending the veto to cover the Ip4ConfigDxe driver for this
manufacturer.
Debugged-by: Celso Viana <celso.vianna@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Most RNDIS data structures include a trailing 4-byte reserved field.
For the REMOTE_NDIS_PACKET_MSG and REMOTE_NDIS_INITIALIZE_CMPLT
structures, this is an 8-byte field instead.
iPXE currently uses incorrect structure definitions with a 4-byte
reserved field in all data structures, resulting in data payloads that
overlap the last 4 bytes of the 8-byte reserved field.
RNDIS uses explicit offsets to locate any data payloads beyond the
message header, and so liberal RNDIS parsers (such as those used in
Hyper-V and in the Linux USB Ethernet gadget driver) are still able to
parse the malformed structures.
A stricter RNDIS parser (such as that found in some older Android
builds that seem to use an out-of-tree USB Ethernet gadget driver) may
reject the malformed structures since the data payload offset is less
than the header length, causing iPXE to be unable to transmit packets.
Fix by correcting the length of the reserved fields.
Debugged-by: Martin Nield <pmn1492@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The ARM versions of the big-integer inline assembly functions include
constraints to indicate that the output value is modified by the
assembly code. These constraints are not present in the equivalent
code for the x86 versions.
As of GCC 11, this results in the compiler reporting that the output
values may be uninitialized.
Fix by including the relevant memory output constraints.
Reported-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Provide a file "initrd.magic" via the EFI_SIMPLE_FILE_SYSTEM_PROTOCOL
that contains the initrd file as constructed for BIOS bzImage kernels
(including injected files with CPIO headers constructed by iPXE).
This allows BIOS and UEFI kernels to obtain the exact same initramfs
image, by adding "initrd=initrd.magic" to the kernel command line.
For example:
#!ipxe
kernel boot/vmlinuz initrd=initrd.magic
initrd boot/initrd.img
initrd boot/modules/e1000.ko /lib/modules/e1000.ko
initrd boot/modules/af_packet.ko /lib/modules/af_packet.ko
boot
Do not include the "initrd.magic" file within the root directory
listing, since doing so would break software such as wimboot that
processes all files within the root directory.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Restructure the EFI_SIMPLE_FILE_SYSTEM_PROTOCOL implementation to
allow for the existence of virtual files that are not simply backed by
a single underlying image.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iPXE will construct CPIO headers for images that have a non-empty
command line, thereby allowing raw images (without CPIO headers) to be
injected into a dynamically constructed initrd. This feature is
currently implemented within the BIOS-only bzImage format support.
Split out the CPIO header construction logic to allow for reuse in
other contexts such as in a UEFI build.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
DNS names are case-insensitive, and RFC 5280 (unlike RFC 3280)
mandates support for case-insensitive name comparison in X.509
certificates.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Use hexadecimal values instead of macros in PCI_ROM entries so Perl
script can parse them correctly. Move PCI_ROM entries from header
file to C file. Integrate bnxt_vf_nics array into PCI_ROM entries by
introducing BNXT_FLAG_PCI_VF flag into driver_data field. Add
whitespaces in PCI_ROM entries for style consistency.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Support for the zlib and gzip archive image formats is currently
included only if the IMAGE_ARCHIVE_CMD is used to enable the
"imgextract" command.
The ability to transparently execute a single-member archive image
without using the "imgextract" command renders this unintuitive: a
user wanting to gain the ability to boot a gzip-compressed kernel
image would expect to have to enable IMAGE_GZIP rather than
IMAGE_ARCHIVE_CMD.
Reverse the inclusion logic, so that archive image formats must now be
enabled explicitly (via IMAGE_GZIP and/or IMAGE_ZLIB), with the
archive image management commands dragged in as needed if any archive
image formats are enabled. The archive image management commands may
be explicitly disabled via IMAGE_ARCHIVE_CMD if necessary.
This matches the behaviour of IBMGMT_CMD and similar options, where
the relevant commands are included only when something else already
drags in the underlying feature.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
An extracted image is wholly derived from the original archive image.
If the original archive image has been verified and marked as trusted,
then this trust logically extends to any image extracted from it.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Provide image_extract_exec() as a helper method to allow single-member
archive images (such as gzip compressed images) to be executed without
an explicit "imgextract" step.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Avoid using the "rdtsc" instruction unless profiling is enabled. This
allows the non-debug build of the UNDI driver to be used on a CPU such
as a 486 that does not support the TSC.
Reported-by: Nikolai Zhubr <n-a-zhubr@yandex.ru>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The decompressor uses the i486 "bswap" instruction, but does not
require any instructions that exist only on i586 or above. Update the
".arch" directive to reflect the requirements of the code as
implemented.
Reported-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add the concept of extracting an image from an archive (which could be
a single-file archive such as a gzip-compressed file), along with an
"imgextract" command to expose this functionality to scripts.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The EFI PCI API takes a page count as the input to AllocateBuffer()
but a byte count as the input to Map(). There is nothing in the UEFI
specification that requires us to map exactly the allocated length,
and no systems have yet been observed that will fail if the map length
does not exactly match the allocated length. However, it is plausible
that some implementations may fail if asked to map a length that does
not match the length of the corresponding allocation.
Avoid potential future problems by always mapping the full allocated
length.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Commit 79c0173 ("[build] Create util/genfsimg for building
filesystem-based images") introduced the new genfsimg, which lacks the
-l option when building ISO files. This option is required to build
level 2 (long plain) ISO9660 filenames, which are required when using
the .lkrn extensions on older versions of ISOLINUX.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The use of jumbo frames for the Xen netfront virtual NIC requires the
use of scatter-gather ("feature-sg"), with the receive descriptor ring
becoming a list of page-sized buffers and the backend using as many
page buffers as required for each packet.
Since iPXE's abstraction of an I/O buffer does not include any sort of
scatter-gather list, this requires an extra allocation and copy on the
receive datapath for any packet that spans more than a single page.
This support is required in order to successfully boot an AWS EC2
virtual machine (with non-enhanced networking) via iSCSI if jumbo
frames are enabled, since the netback driver used in EC2 seems not to
allow "feature-sg" to be renegotiated once the Linux kernel driver
takes over.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The INT 13 extensions provide a mechanism for accessing disks using
linear (LBA) rather than C/H/S addressing. SAN protocols such as
iSCSI invariably support only linear addresses and so iPXE currently
provides LBA access to all SAN disks (with autodetection and emulation
of an appropriate geometry for C/H/S accesses).
Most BIOSes will not report support for INT 13 extensions for floppy
disk drives, and some operating systems may be confused by a floppy
drive that claims such support.
Minimise surprise by reporting the existence of support for INT 13
extensions only for non-floppy drive numbers. Continue to provide
support for all drive numbers, to avoid breaking operating systems
that may unconditionally use the INT 13 extensions without first
checking for support.
Reported-by: Valdo Toost <vtoost@hot.ee>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When CONSOLE_SYSLOG is used, a DBG() from within a network device
driver may cause its transmit() or poll() methods to be unexpectedly
re-entered. Since these methods are not intended to be re-entrant,
this can lead to undefined behaviour.
Add an explicit re-entrancy guard to both methods. Note that this
must operate at a per-netdevice level, since there are legitimate
circumstances under which the netdev_tx() or netdev_poll() functions
may be re-entered (e.g. when using VLAN devices).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
There is no method for obtaining the number of PCI buses when using
PCIAPI_DIRECT, and we therefore currently scan all possible bus
numbers. This can cause a several-second startup delay in some
virtualised environments, since PCI configuration space access will
necessarily require the involvement of the hypervisor.
Ameliorate this situation by defaulting to scanning only a single bus,
and expanding the number of PCI buses to accommodate any subordinate
buses that are detected during enumeration.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Adding this missing identifier allows the X557-AT2 chipset seen on (at
least) Super Micro A2SDI-H-TF motherboards to function with iPXE.
Signed-off-by: Tyler J. Stachecki <stachecki.tyler@gmail.com>
After a PE image is fully loaded and relocated, the loader code may
opt to zero discardable sections for security reasons. This includes
relocation and debug information, as both contain hints about specific
locations within the binary. Mark both generated sections as
discardable, which follows the PE specification.
Signed-off-by: Marvin Häuser <mhaeuser@posteo.de>
For optimal memory permission management, PE sections need to be
aligned by the platform's minimum page size. Currently, the PE
section alignment is fixed to 32 bytes, which is below the typical 4kB
page size. Align all sections to 4kB and adjust ELF to PE image
conversion accordingly.
Signed-off-by: Marvin Häuser <mhaeuser@posteo.de>
As per https://github.com/ipxe/ipxe/pull/313#issuecomment-816018398,
these sections are not required for EFI execution. Discard them to
avoid implementation-defined alignment malforming binaries.
Signed-off-by: Marvin Häuser <mhaeuser@posteo.de>
Handle a DHCPNAK by returning to the discovery state to allow iPXE to
attempt to obtain a replacement IPv4 address.
Reuse the existing logic for deferring discovery when the link is
blocked: this avoids hammering a misconfigured DHCP server with a
non-stop stream of requests and allows the DHCP process to eventually
time out and fail.
Originally-implemented-by: Blake Rouse <blake.rouse@canonical.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The iPXE build system is constructed for a standalone codebase with no
external dependencies, and does not have any equivalent of the
standard userspace ./configure script. We currently check for the
ability to include slirp/libslirp.h and conditionalise portions of
linux_api.c on its presence. The actual slirp driver code is built
unconditionally, as with all iPXE drivers.
This currently leads to a silent runtime failure if attempting to use
slirp.linux built on a system that was missing slirp/libslirp.h.
Convert this to a link-time failure by deliberately omitting the
relevant symbols from linux_api.c when slirp/libslirp.h is not
present. This allows other builds (e.g. tap.linux or tests.linux) to
succeed: the link-time failure will occur only if the slirp driver is
included within the build target.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Linux kernel 3.12 and earlier report a zero size via stat() for all
ACPI table files in sysfs. There is no way to determine the file size
other than by reading the file until EOF.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Consumers of acpi_find() will assume that returned structures include
a valid table header and that the length in the table header is
correct. These assumptions are necessary when dealing with raw ACPI
tables, since there exists no independent source of length
information.
Ensure that these assumptions are also valid for ACPI tables read from
sysfs.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The statx() system call has a clean header file and a consistent
layout, but was unfortunately added only in kernel 4.11.
Using stat() or fstat() directly is extremely messy since glibc does
not necessarily use the kernel native data structures. However, as
the only current use case is to obtain the length of an open file, we
can merely provide a wrapper that does precisely this.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The DNS server list is currently printed as a debug message whenever
settings are applied. This can result in some very noisy debug logs
when a script makes extensive use of settings.
Move the DNS server list debug messages to DBGLVL_EXTRA.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow arbitrary settings to be specified on the Linux command line.
For example:
./bin-x86_64-linux/slirp.linux \
--net slirp,testserver=qa-test.ipxe.org
This can be useful when using the Linux userspace build to test
embedded scripts, since it allows arbitrary parameters to be passed
directly on the command line.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Versions of gcc prior to 9.1 do not support the single-argument form
of static_assert(). Fix by unconditionally defining a compatibility
macro for the single file that uses this.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add a driver using libslirp to provide a virtual network interface
without requiring root permissions on the host. This simplifies the
process of running iPXE as a Linux userspace application with network
access. For example:
make bin-x86_64-linux/slirp.linux
./bin-x86_64-linux/slirp.linux --net slirp
libslirp will provide a built-in emulated DHCP server and NAT router.
Settings such as the boot filename may be controlled via command-line
options. For example:
./bin-x86_64-linux/slirp.linux \
--net slirp,filename=http://192.168.0.1/boot.ipxe
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The "used" attribute can be applied only to functions or variables,
which prevents the use of __asmcall as a type attribute.
Fix by removing "used" from the definition of __asmcall for i386 and
x86_64 architectures, and adding explicit __used annotations where
necessary.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The ACPI API currently expects platforms to provide access to a single
contiguous ACPI table. Some platforms (e.g. Linux userspace) do not
provide a convenient way to obtain the entire ACPI table, but do
provide access to individual tables.
All iPXE consumers of the ACPI API require access only to individual
tables.
Redefine the internal API to make acpi_find() an API method, with all
existing implementations delegating to the current RSDT-based
implementation.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The result from acpi_find_rsdt() is used only for the debug message.
Simplify the debug message and remove the otherwise redundant call to
acpi_find_rsdt().
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When building as a Linux userspace application, iPXE currently
implements its own system calls to the host kernel rather than relying
on the host's C library. The output binary is statically linked and
has no external dependencies.
This matches the general philosophy of other platforms on which iPXE
runs, since there are no external libraries available on either BIOS
or UEFI bare metal. However, it would be useful for the Linux
userspace application to be able to link against host libraries such
as libslirp.
Modify the build process to perform a two-stage link: first picking
out the requested objects in the usual way from blib.a but with
relocations left present, then linking again with a helper object to
create a standard hosted application. The helper object provides the
standard main() entry point and wrappers for the Linux system calls
required by the iPXE Linux drivers and interface code.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow for the possibility of linking to platform libraries for the
Linux userspace build by adding an iPXE-specific symbol prefix.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Recent versions of the GNU assembler (observed with GNU as 2.35 on
Fedora 33) will produce a warning message
Warning: no instruction mnemonic suffix given and no register
operands; using default for `bts'
The operand size affects only the potential range for the bit number.
Since we pass the bit number as an unsigned int, it is already
constrained to 32 bits for both i386 and x86_64.
Silence the assembler warning by specifying an explicit 32-bit operand
size (and thereby matching the choice that the assembler would
otherwise make automatically).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Use the reference implementation of the EFI compression algorithm
(taken from the EDK2 codebase, with minor bugfixes to allow
compilation with -Werror) to compress EFI ROM images.
Inspired-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Assume that preservation of the %xmm registers is unnecessary during
installation of iPXE into memory, since this is an operation that by
its nature substantially disrupts large portions of the system anyway
(such as the E820 memory map). This assumption allows us to utilise
the existing CPUID code to check that FXSAVE/FXRSTOR are supported.
Test for support during the call to init_librm and store the flag for
use during subsequent calls to virt_call.
Reduce the scope of TIVOLI_VMM_WORKAROUND to affecting only the call
to check_fxsr(), to reduce #ifdef pollution in the remaining code.
Debugged-by: Johannes Heimansberg <git@jhe.dedyn.io>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The __asmcall declaration has no effect on a void function with no
parameters, but should be included for completeness since the function
is called directly from assembly code.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Provide a generic raw image prefix, which assumes that the iPXE image
has been loaded in its entirety on a paragraph boundary.
The resulting .raw image can be loaded via RPL using an rpld.conf file
such as:
HOST {
ethernet = 00:00:00:00:00:00/6;
FILE {
path="ipxe.raw";
load=0x2000;
};
execute=0x2000;
};
Debugged-by: Johannes Heimansberg <git@jhe.dedyn.io>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
A zero-length initrd file will currently cause an endless loop during
reshuffling as the empty image is repeatedly swapped with itself.
Fix by terminating the inner loop before considering an image as a
candidate to be swapped with itself.
Reported-by: Pico Mitchell <pico@randomapplications.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Most EFI firmware builds (including those found on ARM64 instances in
AWS EC2) will already send console output to the serial port.
Do not enable direct serial console output in EFI builds using
CONFIG=cloud.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Record the cached DHCPACK obtained from the EFI_PXE_BASE_CODE_PROTOCOL
instance installed on the loaded image's device handle, if present.
This allows a chainloaded UEFI iPXE to reuse the IPv4 address and DHCP
options previously obtained by the built-in PXE stack, as is already
done for a chainloaded BIOS iPXE.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The code to detect the autoboot link-layer address and to load the
autoexec script currently runs before the call to initialise() and so
has to function without a working heap.
This requirement can be relaxed by deferring this code to run via an
initialisation function. This gives the code a normal runtime
environment, but still invokes it early enough to guarantee that the
original loaded image device handle has not yet been invalidated.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The "autoboot device" and "autoexec script" functionalities in
efi_autoboot.c are unrelated except in that they both need to be
invoked by efiprefix.c before device drivers are loaded.
Split out the autoexec script portions to a separate file to avoid
potential confusion.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Split out the portions of cachedhcp.c that can be shared between BIOS
and UEFI (both of which can provide a buffer containing a previously
obtained DHCP packet, and neither of which provide a means to
determine the length of this DHCP packet).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The GCC11 compiler pointed out something that apparently no previous
compiler noticed: in ath5k_eeprom_pread_turbo_modes, local variable
val is used uninitialized. From what I can see, the code is just
missing an initial AR5K_EEPROM_READ. Add it right before the switch
statement.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some versions of GNU ld (observed with binutils 2.36 on Arch Linux)
introduce a .note.gnu.property section marked as loadable at a high
address and with non-empty contents. This adds approximately 128MB of
garbage to the BIOS .usb disk images.
Fix by using a custom linker script for the prefix-only binaries such
as the USB disk partition table and MBR, in order to allow unwanted
sections to be explicitly discarded.
Reported-by: Christian Hesse <mail@eworm.de>
Tested-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The version of SeaBIOS found on some AWS EC2 instances (observed with
t3a.nano in eu-west-1) has no support for the INT 1A PCI BIOS calls.
Bring config/ioapi.h into the named-configuration set of headers, and
specify the use of PCIAPI_DIRECT for CONFIG=cloud, to work around the
missing PCI BIOS support.
Switching to a different named configuration will now unfortunately
cause an almost complete rebuild of iPXE. As described in commit
c801cb2 ("[build] Allow for named configurations at build time"), this
is the reason why config/ioapi.h was not originally in the
named-configuration set of header files.
This rebuild cost is acceptable given that build times are
substantially faster now than seven years ago, and that very few
people are likely to be switching named configurations on a regular
basis.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The Linux and FreeBSD drivers for the (totally undocumented) ENA
adapters use a two-phase reset mechanism: first set ENA_CTRL.RESET and
wait for this to be reflected in ENA_STAT.RESET, then clear
ENA_CTRL.RESET and again wait for it to be reflected in
ENA_STAT.RESET.
The iPXE driver currently assumes a self-clearing reset mechanism,
which appeared to work at the time that the driver was created but
seems no longer to function, at least on the t3.nano and t3a.nano
instance types found in eu-west-1.
Switch to a simplified version of the two-phase reset mechanism as
used by Linux and FreeBSD.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The semantics of the assembler's .align directive vary by CPU
architecture. For the ARM builds, it specifies a power of two rather
than a number of bytes. This currently leads to the .einfo entries
(which do not appear in the final binary) having an alignment of 256
bytes for the ARM builds.
Fix by switching to the GNU-specific directive .balign, which is
consistent across architectures
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Support for building with the Intel C compiler (icc) was added in 2009
in the expectation that UEFI support would eventually involve
compiling iPXE to EFI Byte Code.
EFI Byte Code has never found any widespread use: no widely available
compilers can emit it, Microsoft refuses to sign EFI Byte Code
binaries for UEFI Secure Boot, and I have personally never encountered
any examples of EFI Byte Code in the wild.
The support for using the Intel C compiler has not been tested in over
a decade, and would almost certainly require modification to work with
current releases of the compiler.
Simplify the build process by removing this old legacy code.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
As of commit 7c3d186 ("[build] Check that mkisofs equivalent supports
the required options"), we may refuse to use a mkisofs equivalent if
it does not support the options required to produce the requested
output file.
This can result in confusing error messages since the user is unaware
of the reason for which the installed mkisofs or genisoimage has been
rejected.
Fix by explicitly reporting the reason why each possible mkisofs
equivalent could not be used.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some patched versions of gcc (observed with gcc 9.3.0 on Ubuntu 20.04)
enable -fcf-protection=full by default. This breaks code that is not
explicitly written to expect the use of this flag. The breakage
occurs only at runtime if the affected code (such as setjmp()) happens
to execute, and is therefore a particularly pernicious class of bug to
be introduced into working code by a broken compiler.
Work around these broken patched versions of gcc by detecting support
for -fcf-protection and explicitly setting -fcf-protection=none if
found.
If any Ubuntu maintainers are listening: PLEASE STOP DOING THIS. It's
extremely unhelpful to have to keep working around breakages that you
introduce by modifying the compiler's default behaviour. Do what Red
Hat does instead: set your preferred CFLAGS within the package build
system rather than by patching the compiler to behave in violation of
its own documentation.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Several distributions include versions of gcc that are patched to
create position-independent executables by default. These have caused
multiple problems over the years: see e.g. commits fe61f6d ("[build]
Fix compilation when gcc is patched to default to -fPIE -Wl,-pie"),
5de1346 ("[build] Apply the "-fno-PIE -nopie" workaround only to i386
builds"), 7c395b0 ("[build] Use -no-pie on newer versions of gcc"),
and decee20 ("[build] Disable position-independent code for ARM64 EFI
builds").
The build system currently attempts to work around these mildly broken
patched versions of gcc for the i386 and arm64 architectures. This
misses the relatively obscure bin-x86_64-pcbios build platform, which
turns out to also require the same workaround.
Attempt to preempt the next such required workaround by moving the
existing i386 version to apply to all platforms and all architectures,
unless -fpie has been requested explicitly by another Makefile (as is
done by arch/x86_64/Makefile.efi).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The function trace recorder build logic defaults to making "clean" a
dependency of the first build in a clean checkout. This is redundant
and causes problems if the build process spins up multiple make
invocations to handle multiple build architectures.
Fix by replacing with logic based on the known-working patterns used
for the ASSERT and PROFILE build parameters.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
After a ton of tedious work, I am pleased to finally introduce full
support for ConnectX-3 cards in iPXE!
The work has been done by finding all publicly available versions of
the Mellanox Flexboot sources, cleaning them up, synthesizing a git
history from them, cleaning out non-significant changes, and
correlating with the iPXE upstream git history.
After this, a proof-of-concept diff was produced, that allowed iPXE to
be compiled with rudimentary ConnectX-3 support. This diff was over
10k lines, and contained many changes that were not part of the core
driver.
Special thanks to Michael Brown <mcb30@ipxe.org> for answering my
barrage of questions, and helping brainstorm the development along the
way.
Signed-off-by: Christian Iversen <ci@iversenit.dk>
Some network devices can take a substantial time to close and reopen.
Avoid closing the device from which we are about to attempt booting,
in case it happens to be already open.
Suggested-by: Christian Iversen <ci@iversenit.dk>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The CQE length field will not be valid for a completion in error.
Avoid parsing the length field and just call the completion handler
directly.
In debug builds, also dump the queue pair context to allow for
inspection of the error.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Check for reset completion by waiting for the device to respond to PCI
configuration cycles, as documented in the Programmer's Reference
Manual. On the original ConnectX HCA, this reduces the time spent on
reset from 1000ms down to 1ms.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When auto-detecting the initial port type, the Hermon driver will spam
the debug output without hesitation. Add a short delay in each
iteration to fix this.
Signed-off-by: Christian Iversen <ci@iversenit.dk>
Inspired by Flexboot, the function hermon_event_port_mgmnt_change() is
added to handle the HERMON_EV_PORT_MGMNT_CHANGE event type, which
updates the Infiniband subsystem.
Signed-off-by: Christian Iversen <ci@iversenit.dk>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Hermon Ethernet work queues have more RX than TX entries, unlike most
other drivers. This is possibly the source of some stochastic
deadlocks previously experienced with this driver.
Update the sizes to be in line with other drivers, and make them
slightly larger for better performance. These new queue sizes have
been found to work well with ConnectX-3 hardware.
Signed-off-by: Christian Iversen <ci@iversenit.dk>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The programming documentation states that the reset magic value is
"0x00000001 (Big Endian)", and the current code matches this by using
the value 0x01000000 for the implicitly little-endian writel().
Inspection of the FlexBoot source code reveals an exciting variety of
reset values, some suggestive of confusion around endianness.
Experimentation suggests that the value 0x01000001 works reliably
across a wide range of hardware.
Debugged-by: Christian Iversen <ci@iversenit.dk>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some older versions of the hardware (and/or firmware) do not report an
event when an Infiniband link reaches the INIT state. The driver
works around this missing event by calling ib_smc_update() on each
event queue poll while the link is in the DOWN state.
Commit 6cb12ee ("[hermon] Increase polling rate for command
completions") addressed this by speeding up the time taken to issue
each command invoked by ib_smc_update(). Experimentation shows that
the impact is still significant: for example, in a situation where an
unplugged port is opened, the throughput on the other port can be
reduced by over 99%.
Fix by throttling the rate at which link polling is attempted.
Debugged-by: Christian Iversen <ci@iversenit.dk>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The version of awk used in FreeBSD seems to be incapable of formatting
unsigned 32-bit integers above 0x80000000 and will silently render any
such value as 0x80000000. For example:
echo 3735928559 | awk '{printf "0x%08x", $1}'
will produce 0x80000000 instead of the correct 0xdeadbeef.
This results in an approximately 50% chance of a build ID collision
when building on FreeBSD.
Work around this problem by passing the decimal value directly in the
ld --defsym argument value.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add a few more ABSOLUTE() expressions to convince the FreeBSD linker
that already-absolute symbols are, in fact, absolute.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The elftoolchain version of objcopy (as used in FreeBSD) seems to be
unusable for generating a raw binary file, since it will apparently
ignore the load memory addresses specified for each section in the
input file.
The binutils version of objcopy may be used on FreeBSD by specifying
OBJCOPY=/usr/local/bin/objcopy
Detect an attempt to use the unusable elftoolchain version of objcopy
and report it as an error.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some versions of objcopy will spuriously complain when asked to
extract the .zinfo section since doing so will nominally alter the
load addresses of the (non-loadable) .bss.* sections.
Avoid these warnings by placing the .zinfo section at the very end of
the load memory address space.
Allocate non-overlapping load memory addresses for the (non-loadable)
.bss.* sections, in the hope of avoiding spurious warnings about
overlapping load addresses.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Calculate the build ID as a checksum over the input files. Since the
input files include $(BIN)/version.%.o which itself includes the build
target name (from which TGT_LD_FLAGS is calculated), this should be
sufficient to meet the requirement that the build ID be unique for
each $(BIN)/%.tmp even within the same build run.
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When using $(shell), make will first invoke BUILD_ID_CMD and then have
the value defined when calling $(LD). This means we get to see the
_build_id when building with make V=1. Previously the build_id was
figured out as a subshell command run during the recipe execution
without being able to see the build_id itself.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Directories may be left behind by failed filesystem image builds, and
will not currently be successfully removed by a "make clean".
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The elf.h on FreeBSD defines ELF_R_TYPE and ELF_R_SYM (based on the
host platform) and omits some but not all of the AArch64 relocation
types.
Fix by undefining ELF_R_TYPE and ELF_R_SYM in favour of our own
definitions, and by placing each potentially missing relocation type
within an individual #ifdef guard.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The -boot-info-table option to mkisofs will cause it to overwrite a
portion of the local copy of isolinux.bin. Ensure that this file is
writable.
Originally-implemented-by: Nikolai Lifanov <lifanov@mail.lifanov.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Make the contents of $(BLIB) deterministic to allow it to be
subsequently used for calculating a build ID.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This change is ported from Flexboot sources. When stopping a Hermon
device, perform hermon_unmap_mpt() which runs HERMON_HCR_HW2SW_MPT to
bring the Memory Protection Table (MPT) back to software control.
Signed-off-by: Christian Iversen <ci@iversenit.dk>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The eIPoIB local Ethernet MAC is currently constructed from the port
GUID. Given a base GUID/MAC value of N, Mellanox seems to populate:
Node GUID: N + 0
Port 1 GUID: N + 1
Port 2 GUID: N + 2
and
Port 1 MAC: N + 0
Port 2 MAC: N + 1
This causes a duplicate local MAC address when port 1 is configured as
Infiniband and port 2 as Ethernet, since both will derive their MAC
address as (N + 1).
Fix by using the port's Ethernet MAC as the eIPoIB local EMAC. This
is a behavioural change that could potentially break configurations
that rely on the local EMAC value, such as a DHCP server relying on
the chaddr field for DHCP reservations.
Signed-off-by: Christian Iversen <ci@iversenit.dk>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some older versions of the hardware (and/or firmware) do not report an
event when an Infiniband link reaches the INIT state. The driver
works around this missing event by calling ib_smc_update() on each
event queue poll while the link is in the DOWN state. This results in
a very large number of commands being issued while any open Infiniband
link is in the DOWN state (e.g. unplugged), to the point that the 1ms
delay from waiting for each command to complete will noticeably affect
responsiveness.
Fix by decreasing the command completion polling delay from 1ms to
10us.
Signed-off-by: Christian Iversen <ci@iversenit.dk>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add hermon_dump_eqctx() for dumping the event queue context and
hermon_dump_eqes() for dumping any unconsumed event queue entries.
Originally-implemented-by: Christian Iversen <ci@iversenit.dk>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some commands (particularly in relation to device initialization) can
occasionally take longer than 2 seconds, and the Mellanox documentation
recommends a 10 second timeout.
Signed-off-by: Christian Iversen <ci@iversenit.dk>
The original EFI_SIMPLE_TEXT_INPUT_PROTOCOL is not technically
required to handle the use of the Ctrl key, and the long-obsolete EFI
1.10 specification lists only backspace, tab, linefeed, and carriage
return as required. Some particularly brain-dead vendor UEFI firmware
implementations dutifully put in the extra effort of ensuring that all
other control characters (such as Ctrl-C) are impossible to type via
EFI_SIMPLE_TEXT_INPUT_PROTOCOL.
Current versions of the UEFI specification mandate that the console
input handle must support both EFI_SIMPLE_TEXT_INPUT_PROTOCOL and
EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL, the latter of which at least
provides access to modifier key state.
Unlike EFI_SIMPLE_TEXT_INPUT_PROTOCOL, the pointer to the
EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL instance does not appear within the
EFI system table and must therefore be opened explicitly. The UEFI
specification provides no safe way to do so, since we cannot open the
handle BY_DRIVER or BY_CHILD_CONTROLLER and so nothing guarantees that
this pointer will remain valid for the lifetime of iPXE. We must
simply hope that no UEFI firmware implementation ever discovers a
motivation for reinstalling the EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL
instance.
Use EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL if available, falling back to
the existing EFI_SIMPLE_TEXT_PROTOCOL otherwise.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iPXE when used as a NIC option ROM can sometimes be reloaded by the
UEFI/BIOS and any pre-initialised memory will remain loaded. When the
imgtrust command is run it sets `require_trusted_images'. Upon
reloading, iPXE tries to load the first embedded image but fails as it
is not marked trusted.
Setting this flag ensures that imgtrust with the first embedded script
is reentrant.
Signed-off-by: Joe Groocock <jgroocock@cloudflare.com>
Require drivers to report the total number of Infiniband ports. This
is necessary to report the correct number of ports on devices with
dynamic port types.
For example, dual-port Mellanox cards configured for (eth, ib) would
be rejected by the subnet manager, because they report using "port 2,
out of 1".
Signed-off-by: Christian Iversen <ci@iversenit.dk>
This is useful on devices that perform auto-detection for ports.
Example output:
iPXE> ifstat
net0: 00:11:22:33:44:55 using mt4099 on 0000:00:03.0 (Ethernet) [open]
[Link:down, TX:0 TXE:0 RX:0 RXE:0]
[Link status: Unknown (http://ipxe.org/1a086101)]
net1: 00:11:22:33:44:56 using mt4099 on 0000:00:03.0 (IPoIB) [open]
[Link:down, TX:0 TXE:0 RX:0 RXE:0]
[Link status: Initialising (http://ipxe.org/1a136101)]
Signed-off-by: Christian Iversen <ci@iversenit.dk>
When booting iPXE from a filesystem (e.g. a FAT-formatted USB key) it
can be useful to have an iPXE script loaded automatically from the
same filesystem. Compared to using an embedded script, this has the
advantage that the script can be edited without recompiling the iPXE
binary.
For the BIOS version of iPXE, loading from a filesystem is handled
using syslinux (or isolinux) which allows the script to be passed to
the iPXE .lkrn image as an initrd.
For the UEFI version of iPXE, the platform firmware loads the iPXE
.efi image directly and there is currently no equivalent of the BIOS
initrd mechanism.
Add support for automatically loading a file "autoexec.ipxe" (if
present) from the root of the filesystem containing the UEFI iPXE
binary.
A combined BIOS and UEFI image for a USB key can be created using e.g.
./util/genfsimg -o usbkey.img -s myscript.ipxe \
bin-x86_64-efi/ipxe.efi bin/ipxe.lkrn
The file "myscript.ipxe" would appear as "autoexec.ipxe" on the USB
key, and would be loaded automatically on both BIOS and UEFI systems.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Consolidate the remaining logic common to initrd_init() and imgmem()
into a shared image_memory() function.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The "-e" option required for creating EFI boot images is supported
only by widely used patched versions of genisoimage.
Check that the required options are supported when selecting a mkisofs
equivalent, thereby allowing a fallback to the use of xorrisofs when
building a UEFI ISO image on a system with an unpatched version of
genisoimage.
Continue to prefer the use of genisoimage over xorrisofs, since there
is apparently no way to inhibit the irritatingly useless startup
banner message printed by xorrisofs even when the "-quiet" option is
specified.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Provide some visibility into the turnaround times on both client and
server sides as perceived by iPXE, to assist in debugging inexplicably
slow TFTP transfers.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Provide the "imgmem" command to create an image from an existing block
of memory, for debugging purposes only.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
For FAT filesystem images larger than a 1.44MB floppy disk, round up
the image size to a whole number of 504kB cylinders before formatting.
This avoids losing up to a cylinder's worth of expected space in the
filesystem image.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow generated filesystem images to be accessed using the file:// URI
syntax by setting a defined volume name. This allows a script placed
on the same filesystem image to be accessed using e.g.
chain file://iPXE/script.ipxe
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Extract the PE header offset from the MZ header rather than assuming a
fixed offset as used in the binaries created by the iPXE build system.
This allows genfsimg to be used to create bootable filesystem images
from third party UEFI binaries such as the UEFI shell.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
With the default timeouts for Cisco MAC Authentication Bypass, the
link will remain blocked for around 90 seconds (plus a likely
subsequent delay for STP).
Extend the maximum number of DHCP discovery deferrals to allow for up
to three minutes of waiting for a link to become unblocked.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
A switch port using 802.1x authentication will send EAP
Request-Identity packets once the physical link is up, and will not be
forwarding packets until the port identity has been established.
We do not currently support 802.1x authentication. However, a
reasonably common configuration involves using a preset list of
permitted MAC addresses, with the "authentication" taking place
between the switch and a RADIUS server. In this configuration, the
end device does not need to perform any authentication step, but does
need to be prepared for the switch port to fail to forward packets for
a substantial time after physical link-up. This exactly matches the
"blocked link" semantics already used when detecting a non-forwarding
switch port via LACP or STP.
Treat a received EAP Request-Identity as indicating a blocked link.
Unlike LACP or STP, there is no way to determine the expected time
until the next EAP packet and so we must choose a fixed timeout.
Erroneously assuming that the link is blocked is relatively harmless
since we will still attempt to transmit and receive data even over a
link that is marked as blocked, and so the net effect is merely to
prolong DHCP attempts. In contrast, erroneously assuming that the
link is unblocked will potentially cause DHCP to time out and give up,
resulting in a failed boot.
The default EAP Request-Identity interval in Cisco switches (where
this is most likely to be encountered in practice) is 30 seconds, so
choose 45 seconds as a timeout that is likely to avoid gaps during
which we falsely assume that the link is unblocked.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Replace the GPL2+-only EAPoL code (currently used only for WPA) with
new code licensed under GPL2+-or-UBDL.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Continue to transmit DHCPDISCOVER while waiting for a blocked link, in
order to support mechanisms such as Cisco MAC Authentication Bypass
that require repeated transmission attempts in order to trigger the
action that will result in the link becoming unblocked.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add support for xorrisofs, a GNU mkisofs equivalent that is available
in most distro repositories.
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some versions of gcc (observed with gcc 9.3.0 on NixOS Linux) produce
a spurious warning about an out-of-bounds array access for the
isa_extra_probe_addrs[] array.
Work around this compiler bug by redefining the array index as a
signed long, which seems to somehow avoid this spurious warning.
Debugged-by: Manuel Mendez <mmendez534@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Generalise util/geniso, util/gensdsk, and util/genefidsk to create a
single script util/genfsimg that can be used to build either FAT
filesystem images or ISO images.
Extend the functionality to allow for building multi-architecture UEFI
bootable ISO images and combined BIOS+UEFI images.
For example:
./util/genfsimg -o combined.iso \
bin-x86_64-efi/ipxe.efi \
bin-arm64-efi/ipxe.efi \
bin/ipxe.lkrn
would generate a hybrid image that could be used as a CDROM (or hard
disk or USB key) on legacy BIOS, x86_64 UEFI, or ARM64 UEFI.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some UEFI device drivers will react to an asynchronous USB transfer
failure by dubiously terminating the scheduled transfer from within
the completion handler.
We already have code from commit fbb776f ("[efi] Leave USB endpoint
descriptors in existence until device is removed") that avoids freeing
memory in this situation, in order to avoid use-after-free bugs. This
is not sufficient to avoid potential problems, since with an xHCI
controller the act of closing the endpoint requires issuing a command
and awaiting completion via the event ring, which may in turn dispatch
further USB transfer completion events.
Avoid these problems by leaving the USB endpoint open (but with the
refill timer stopped) until the device is finally removed, as is
already done for control and bulk transfers.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Ensure that any command failure messages are followed up with an error
message indicating what the failed command was attempting to perform.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The xHCI driver can handle only a single command TRB in progress at
any one time. Immediately fail any attempts to issue concurrent
commands (which should not occur in normal operation).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
There may be multiple instances of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL for
a single PCI segment. Use the bus number range descriptor from the
ACPI resource list to identify the correct protocol instance.
There is some discrepancy between the ACPI and UEFI specifications
regarding the interpretation of values within the ACPI resource list.
The ACPI specification defines the min/max field values to be within
the secondary (device-side) address space, and defines the offset
field value as "the offset that must be added to the address on the
secondary side to obtain the address on the primary side".
The UEFI specification states instead that the offset field value is
the "offset to apply to the starting address to convert it to a PCI
address", helpfully omitting to clarify whether "to apply" in this
context means "to add" or "to subtract". The implication of the
wording is also that the "starting address" is not already a "PCI
address" and must therefore be a host-side address rather than the
ACPI-defined device-side address.
Code comments in the EDK2 codebase seem to support the latter
(non-ACPI) interpretation of these ACPI structures. For example, in
the PciHostBridgeDxe driver there can be found the comment
Macros to translate device address to host address and vice versa.
According to UEFI 2.7, device address = host address + translation
offset.
along with a pair of macros TO_HOST_ADDRESS() and TO_DEVICE_ADDRESS()
which similarly negate the sense of the "translation offset" from the
definition found in the ACPI specification.
The existing logic in efipci_ioremap() (based on a presumed-working
externally contributed patch) applies the non-ACPI interpretation: it
assumes that min/max field values are host-side addresses and that the
offset field value is negated.
Match this existing logic by assuming that min/max field values are
host-side bus numbers. (The bus number offset value is therefore not
required and so can be ignored.)
As noted in commit 9b25f6e ("[efi] Fall back to assuming identity
mapping of MMIO address space"), some systems seem to fail to provide
MMIO address space descriptors. Assume that some systems may
similarly fail to provide bus number range descriptors, and fall back
in this situation to assuming that matching on segment number alone is
sufficient.
Testing any of this is unfortunately impossible without access to
esoteric hardware that actually uses non-zero translation offsets.
Originally-implemented-by: Thomas Walker <twalker@twosigma.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Email from solarflare.com will stop working, so update those. Remove
email for Shradha Shah, as she is not involved with this any more.
Update copyright notices for files touched.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
We surface this debugging information in cases where a cert actually
lacks an issuer, but also in cases where it *has* an issuer, but we
cannot trust it (e.g. due to issues in establishing a trust chain).
Signed-off-by: Josh McSavaney <me@mcsau.cc>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iPXE seems to be almost alone in the UEFI world in attempting to shut
down cleanly, free resources, and leave hardware in a well-defined
reset state before handing over to the booted operating system.
The UEFI driver model does allow for graceful shutdown via
uninstallation of protocol interfaces. However, virtually no other
UEFI drivers do this, and the external code paths that react to
uninstallation are consequently poorly tested. This leads to a
proliferation of bugs found in UEFI implementations in the wild, as
described in commits such as 1295b4a ("[efi] Allow initialisation via
SNP interface even while claimed") or b6e2ea0 ("[efi] Veto the HP
XhciDxe Driver").
Try to avoid triggering such bugs by unconditionally skipping the
protocol interface uninstallation during UEFI boot services shutdown,
leaving the interfaces present but nullified and deliberately leaking
the containing memory.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
USB tethering via an iPhone is unreasonably complicated due to the
requirement to perform a pairing operation that involves establishing
a TLS session over a completely unrelated USB function that speaks a
protocol that is almost, but not quite, entirely unlike TCP.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Record the root of trust used at the point that a certificate is
validated, redefine validation as checking a certificate against a
specific root of trust, and pass an explicit root of trust when
creating a TLS connection.
This allows a custom TLS connection to be used with a custom root of
trust, without causing any validated certificates to be treated as
valid for normal purposes.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
OCSP currently calls x509_validate() with an empty root certificate
list, on the basis that the OCSP signer certificate (if existent) must
be signed directly by the issuer certificate.
Using an empty root certificate list is not required to achieve this
goal, since x509_validate() already accepts an explicit issuer
certificate parameter. The explicit empty root certificate list
merely prevents the signer certificate from being evaluated as a
potential trusted root certificate.
Remove the dummy OCSP root certificate list and use the default root
certificate list when calling x509_validate().
Signed-off-by: Michael Brown <mcb30@ipxe.org>
There is nothing OID-specific about the ASN1_OID_CURSOR macro. Rename
to allow it to be used for constructing ASN.1 cursors with arbitrary
contents.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Use the existing certificate store to automatically append any
available issuing certificates to the selected client certificate.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Restructure the use of add_tls() to insert a TLS filter onto an
existing interface. This allows for the possibility of using
add_tls() to start TLS on an existing connection (as used in several
protocols which will negotiate the choice to use TLS before the
ClientHello is sent).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Generalise the filter interface insertion logic from block_translate()
and expose as intf_insert(), allowing a filter interface to be
inserted on any existing interface.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The HP XhciDxe driver (observed on an HP EliteBook 840 G6) does not
respond correctly to driver disconnection, and will leave the PciIo
protocol instance opened with BY_DRIVER attributes even after
returning successfully from its Stop() method. This prevents iPXE
from subsequently connecting to the PCI device handle.
Veto this driver if the iPXE build includes a native xHCI driver.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some UEFI drivers (observed with the "Usb Xhci Driver" on an HP
EliteBook) are particularly badly behaved: they cannot be unloaded and
will leave handles opened with BY_DRIVER attributes even after
disconnecting the driver, thereby preventing a replacement iPXE driver
from opening the handle.
Allow such drivers to be vetoed by falling back to a brute-force
mechanism that will disconnect the driver from all handles, uninstall
the driver binding protocol (to prevent it from attaching to any new
handles), and finally close any stray handles that the vetoed driver
has left open.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Most veto checks are likely to use the manufacturer name and driver
name, so pass these as parameters to minimise code duplication.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow external code to dump the information for an opened protocol
information entry via DBG_EFI_OPENER() et al.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some devices (e.g. xHCI USB host controllers) may require the use of
large areas of host memory for private use by the device. These
allocations cannot be satisfied from iPXE's limited heap space, and so
are currently allocated using umalloc() which will allocate external
system memory (and alter the system memory map as needed).
Provide dma_umalloc() to provide such allocations as part of the DMA
API, since there is otherwise no way to guarantee that the allocated
regions are usable for coherent DMA.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The UEFI specification does not prohibit zero-length DMA mappings.
However, there is a reasonable chance that at least one implementation
will treat it as an invalid parameter. As a precaution, avoid calling
EFI_PCI_IO_PROTOCOL.Map() with a length of zero.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Unlike netdev_rx_err(), there is no valid circumstance under which
netdev_rx() may be called with a null I/O buffer, since a call to
netdev_rx() represents the successful reception of a packet. Fix the
code comment to reflect this.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
netdev_tx_err() may be called with a null I/O buffer (e.g. to record a
transmit error with no associated buffer). Avoid a potential null
pointer dereference in the DMA unmapping code path.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Include a potential DMA mapping within the definition of an I/O
buffer, and move all I/O buffer DMA mapping functions from dma.h to
iobuf.h. This avoids the need for drivers to maintain a separate list
of DMA mappings for each I/O buffer that they may handle.
Network device drivers typically do not keep track of transmit I/O
buffers, since the network device core already maintains a transmit
queue. Drivers will typically call netdev_tx_complete_next() to
complete a transmission without first obtaining the relevant I/O
buffer pointer (and will rely on the network device core automatically
cancelling any pending transmissions when the device is closed).
To allow this driver design approach to be retained, update the
netdev_tx_complete() family of functions to automatically perform the
DMA unmapping operation if required. For symmetry, also update the
netdev_rx() family of functions to behave the same way.
As a further convenience for drivers, allow the network device core to
automatically perform DMA mapping on the transmit datapath before
calling the driver's transmit() method. This avoids the need to
introduce a mapping error handling code path into the typically
error-free transmit methods.
With these changes, the modifications required to update a typical
network device driver to use the new DMA API are fairly minimal:
- Allocate and free descriptor rings and similar coherent structures
using dma_alloc()/dma_free() rather than malloc_phys()/free_phys()
- Allocate and free receive buffers using alloc_rx_iob()/free_rx_iob()
rather than alloc_iob()/free_iob()
- Calculate DMA addresses using dma() or iob_dma() rather than
virt_to_bus()
- Set a 64-bit DMA mask if needed using dma_set_mask_64bit() and
thereafter eliminate checks on DMA address ranges
- Either record the DMA device in netdev->dma, or call iob_map_tx() as
part of the transmit() method
- Ensure that debug messages use virt_to_phys() when displaying
"hardware" addresses
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Redefine the value stored within a DMA mapping to be the offset
between physical addresses and DMA addresses within the mapped region.
Provide a dma() wrapper function to calculate the DMA address for any
pointer within a mapped region, thereby simplifying the use cases when
a device needs to be given addresses other than the region start
address.
On a platform using the "flat" DMA implementation the DMA offset for
any mapped region is always zero, with the result that dma_map() can
be optimised away completely and dma() reduces to a straightforward
call to virt_to_phys().
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iPXE will currently fail all SNP interface methods with EFI_NOT_READY
while the network devices are claimed for use by iPXE's own network
stack.
As of commit c70b3e0 ("[efi] Always enable recursion when calling
ConnectController()"), this exposes latent UEFI firmware bugs on some
systems at the point of calling ExitBootServices().
With recursion enabled, the MnpDxe driver will immediately attempt to
consume the SNP protocol instance provided by iPXE. Since the network
devices are claimed by iPXE at this point, the calls by MnpDxe to
Start() and Initialize() will both fail with EFI_NOT_READY.
This unfortunately triggers a broken error-handling code path in the
Ip6Dxe driver. Specifically: Ip6DriverBindingStart() will call
Ip6CreateService(), which will call Ip6ServiceConfigMnp(), which will
return an error. The subsequent error handling code path in
Ip6CreateService() simply calls Ip6CleanService(). The code in
Ip6CleanService() will attempt to leave the all-nodes multicast group,
which will fail since the group was never joined. This will result in
Ip6CleanService() returning an error and omitting most of the required
clean-up operations. In particular, the MNP protocol instance will
remain opened with BY_DRIVER attributes even though the Ip6Dxe driver
start method has failed.
When ExitBootServices() is eventually called, iPXE will attempt to
uninstall the SNP protocol instance. This results in the UEFI core
calling Ip6DriverBindingStop(), which will fail since there is no
EFI_IP6_SERVICE_BINDING_PROTOCOL instance installed on the handle.
A failure during a call to UninstallMultipleProtocolInterfaces() will
result in the UEFI core attempting to reinstall any successfully
uninstalled protocols. This is an intrinsically unsafe operation, and
represents a fundamental design flaw in UEFI. Failure code paths
cannot be required to themselves handle failures, since there is no
well-defined correct outcome of such a situation.
With a current build of OVMF, this results in some unexpected debug
messages occurring at the time that the loaded operating system calls
ExitBootServices(). With the UEFI firmware in Hyper-V, the result is
an immediate reboot.
Work around these UEFI design and implementation flaws by allowing the
calls to our EFI_SIMPLE_NETWORK_PROTOCOL instance's Start() and
Initialize() methods to return success even when the network devices
are claimed for exclusive use by iPXE. This is sufficient to allow
MnpDxe to believe that it has successfully initialised the device, and
thereby avoids the problematic failure code paths in Ip6Dxe.
Debugged-by: Aaron Heusser <aaron_heusser@hotmail.com>
Debugged-by: Pico Mitchell <pico@randomapplications.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
For the physical function driver, the transmit queue needs to be
configured to be associated with the relevant physical function
number. This is currently obtained from the bus:dev.fn address of the
underlying PCI device.
In the case of a virtual machine using the physical function via PCI
passthrough, the PCI bus:dev.fn address within the virtual machine is
unrelated to the real physical function number. Such a function will
typically be presented to the virtual machine as a single-function
device. The function number extracted from the PCI bus:dev.fn address
will therefore always be zero.
Fix by reading from the Function Requester ID Information Register,
which always returns the real PCI bus:dev.fn address as used by the
physical host.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The datasheet is fairly incomprehensible in terms of identifying the
appropriate MAC address for use by the physical function driver.
Choose to read the MAC address from PRTPM_SAH and PRTPM_SAL, which at
least matches the MAC address as selected by the Linux i40e driver.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iPXE will currently drop to TPL_APPLICATION whenever the current
system time is obtained via currticks(), since the system time
mechanism relies on a timer that can fire only when the TPL is below
TPL_CALLBACK.
This can cause unexpected behaviour if the system time is obtained in
the middle of an API call into iPXE by external code. For example,
MnpDxe sets up a 10ms periodic timer running at TPL_CALLBACK to poll
the underling EFI_SIMPLE_NETWORK_PROTOCOL device for received packets.
If the resulting poll within iPXE happens to hit a code path that
requires obtaining the current system time (e.g. due to reception of
an STP packet, which affects iPXE's blocked link timer), then iPXE
will end up temporarily dropping to TPL_APPLICATION. This can
potentially result in retriggering the MnpDxe periodic timer, causing
code to be unexpectedly re-entered.
Fix by recording the external TPL at any entry point into iPXE and
dropping only as far as this external TPL, rather than dropping
unconditionally to TPL_APPLICATION.
The side effect of this change is that iPXE's view of the current
system time will be frozen for the duration of any API calls made into
iPXE by external code at TPL_CALLBACK or above. Since any such
external code is already responsible for allowing execution at
TPL_APPLICATION to occur, then this should not cause a problem in
practice.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Physical addresses in debug messages are more meaningful from an
end-user perspective than potentially IOMMU-mapped I/O virtual
addresses, and have the advantage of being calculable without access
to the original DMA mapping entry (e.g. when displaying an address for
a single failed completion within a descriptor ring).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
For a software UNDI, the addresses in PXE_CPB_TRANSMIT.FrameAddr and
PXE_CPB_RECEIVE.BufferAddr are host addresses, not bus addresses.
Remove the spurious (and no-op) use of virt_to_bus() and replace with
a cast via intptr_t.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The UEFI specification defines PXE_CPB_TRANSMIT.DataLen as excluding
the length of the media header. iPXE currently fills in DataLen as
the whole frame length (including the media header), along with
placing the media header length separately in MediaheaderLen. On some
UNDI implementations (observed using a VMware ESXi 7.0b virtual
machine), this causes transmitted packets to include 14 bytes of
trailing garbage.
Match the behaviour of the EDK2 SnpDxe driver, which fills in DataLen
as the whole frame length (including the media header) and leaves
MediaheaderLen as zero. This behaviour also violates the UEFI
specification, but is likely to work in practice since EDK2 is the
reference implementation.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iPXE currently assumes that DMA-capable devices can directly address
physical memory using host addresses. This assumption fails when
using an IOMMU.
Define an internal DMA API with two implementations: a "flat"
implementation for use in legacy BIOS or other environments in which
flat physical addressing is guaranteed to be used and all allocated
physical addresses are guaranteed to be within a 32-bit address space,
and an "operations-based" implementation for use in UEFI or other
environments in which DMA mapping may require bus-specific handling.
The purpose of the fully inlined "flat" implementation is to allow the
trivial identity DMA mappings to be optimised out at build time,
thereby avoiding an increase in code size for legacy BIOS builds.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The malloc_dma() function allocates memory with specified physical
alignment, and is typically (though not exclusively) used to allocate
memory for DMA.
Rename to malloc_phys() to more closely match the functionality, and
to create name space for functions that specifically allocate and map
DMA-capable buffers.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Provide opened EFI PCI devices with access to the underlying
EFI_PCI_IO_PROTOCOL instance, in order to facilitate the future use of
the DMA mapping methods within the fast data path.
Do not require the use of this stored EFI_PCI_IO_PROTOCOL instance for
memory-mapped I/O (since the entire point of memory-mapped I/O as a
concept is to avoid this kind of unnecessary complexity) or for
slow-path PCI configuration space accesses (since these may be
required for access to PCI bus:dev.fn addresses that do not correspond
to a device bound via our driver binding protocol instance).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The legacy transmit descriptor index is not reset by anything short of
a full device reset. This can cause the legacy transmit ring to stall
after closing and reopening the device, since the hardware and
software indices will be out of sync.
Fix by performing a reset after closing the interface. Do this only
if operating in legacy mode, since in C+ mode the reset is not
required and would undesirably clear additional state (such as the C+
command register itself).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some UEFI systems (observed with a Supermicro X11SPG-TF motherboard)
seem to fail to provide a valid ACPI address space descriptor for the
MMIO address space associated with a PCI root bridge.
If no valid descriptor can be found, fall back to assuming that the
MMIO address space is identity mapped, thereby matching the behaviour
prior to commit 27e886c ("[efi] Use address offset as reported by
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL").
Debugged-by: Tore Anderson <tore@fud.no>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Commit 87e39a9c9 ("[efi] Split efi_usb_path() out to a separate
function") unintentionally introduced an undefined symbol reference
from efi_path.o to usb_depth(), causing the USB subsystem to become a
dependency of all EFI builds.
Fix by converting usb_depth() to a static inline function.
Reported-by: Pico Mitchell <pico@randomapplications.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The UEFI specification allows uninstallation of a protocol interface
to fail. There is no sensible way for code to react to this, since
uninstallation is likely to be taking place on a code path that cannot
itself fail (e.g. a code path that is itself a failure path).
Where the protocol structure exists within a dynamically allocated
block of memory, this leads to possible use-after-free bugs. Work
around this unfortunate design choice by nullifying the protocol
(i.e. overwriting the method pointers with no-ops) and leaking the
memory containing the protocol structure.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Use the device path constructed via efi_describe() for the installed
EFI_BLOCK_IO_PROTOCOL device handle.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The UEFI specification provides a partial definition of an Infiniband
device path structure. Use this structure to construct what may be a
plausible path containing at least some of the information required to
identify an SRP target device.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The ACPI table contents are typically large and are likely to cause
any preceding error messages to scroll off-screen.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
There is no standard defined for AoE device paths in the UEFI
specification, and it seems unlikely that any standard will be adopted
in future.
Choose to construct an AoE device path using a concatenation of the
network device path and a SATA device path, treating the AoE major and
minor numbers as the HBA port number and port multiplier port number
respectively.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Provide efi_netdev_path() as a standalone function, to allow for reuse
when constructing child device paths.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow an interface operation to be declared as unused. This will
perform full type-checking and compilation of the implementing method,
without including any code in the resulting object (other than a NULL
entry in the interface operations table).
The intention is to provide a relatively clean way for interface
operation methods to be omitted in builds for which the operation is
not required (such as an operation to describe an object using an EFI
device path, which would not be required in a non-EFI build).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown
Benedikt Braunger
Aaron Young
JuniorJPDJ
Bernhard M. Wiedemann
Joseph
Christian Nilsson
Matya
Tyler J. Stachecki
Marvin Häuser
Bruce Rogers
Christian Iversen
Manuel Mendez
Joe Groocock
Omgalof
b1f6c1c4
Martin Habets
Josh McSavaney
Mohammed Taha