Older versions of gcc (observed with gcc 4.5.3) require attributes to
be specified on the first declaration of a symbol, and will silently
ignore attributes specified after the initial declaration. This
causes the ASN.1 OID-identified algorithms to end up misaligned.
Fix by adding __asn1_algorithm to the initial declarations in asn1.h.
Debugged-by: Dentcho Bankov <dbankov@vmware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
We currently use a heuristic to determine whether or not to request
cable detection in PXE_OPCODE_INITIALIZE, based on the need to work
around a known Emulex driver bug (see commit c0b61ba "[efi] Work
around bugs in Emulex NII driver") and the need to accommodate links
that are legitimately slow to come up (see commit 6324227 "[efi] Skip
cable detection at initialisation where possible").
This heuristic appears to fail with newer Emulex drivers. Attempt to
support all known drivers (past and present) by first attempting
initialisation with cable detection, then falling back to attempting
initialisation without cable detection.
Reported-by: Kwang Woo Lee <kwleeyh@gmail.com>
Tested-by: Kwang Woo Lee <kwleeyh@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The file:/ URI syntax may be used to refer to local files on the
filesystem from which the iPXE binary was loaded. This is currently
implemented by directly using the DeviceHandle recorded in our
EFI_LOADED_IMAGE_PROTOCOL.
This mechanism will fail when a USB-enabled build of iPXE is loaded
from USB storage and subsequently installs its own USB host controller
drivers, since doing so will disconnect and reconnect the existing USB
storage drivers and thereby invalidate the original storage device
handle.
Fix by recording the device path for the loaded image's DeviceHandle
at initialisation time and later using the recorded device path to
locate the appropriate device handle.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The various USB specifications all use one-based numbering for ports.
This scheme is applied consistently across the various relevant
specifications, covering both port numbers that appear on the wire
(i.e. downstream hub port numbers) and port numbers that exist only
logically (i.e. root hub port numbers).
The UEFI specification is ambiguous about the port numbers as used for
the ParentPortNumber field within a USB_DEVICE_PATH structure. As of
UEFI specification version 2.8 errata B:
- section 10.3.4.5 just states "USB Parent Port Number" with no
indication of being zero-based or one-based
- section 17.1.1 notes that for the EFI_USB2_HC_PROTOCOL, references
to PortNumber parameters are zero-based for root hub ports
- section 17.1.1 also mentions a TranslatorPortNumber used by
EFI_USB2_HC_PROTOCOL, with no indication of being zero-based or
one-based
- there are no other mentions of USB port numbering schemes.
Experimentation and inspection of the EDK2 codebase reveals that at
least the EDK2 reference implementation will use zero-based numbering
for both root and non-root hub ports when populating a USB_DEVICE_PATH
structure (though will inconsistently use one-based numbering for the
TranslatorPortNumber parameter).
Use zero-based numbering for both root and non-root hub ports when
constructing a USB_DEVICE_PATH in order to match the behaviour of the
EDK2 implementation.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This change fixes the offset used when retrieving the iPXE stack
pointer after a COM32 binary returns. The iPXE stack pointer is saved
at the top of the available memory then the the top of the stack for
the COM32 binary is set just below it. However seven more items are
pushed on the COM32 stack before the entry point is invoked so when
the COM32 binary returns the location of the iPXE stack pointer is 28
(and not 24) bytes above the current stack pointer.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
According to the latest UEFI specification (Version 2.8 Errata B)
p. 7.2:
"Buffer: A pointer to a pointer to the allocated buffer if the call
succeeds; undefined otherwise."
So implementations are obliged neither to return NULL, if the
allocation fails, nor to preserve the contents of the pointer.
Make the logic more reliable by checking the status code from
AllocatePool() instead of checking the returned pointer for NULL
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
At the moment '\s*' is silently interpreted as just 's*', but in the
future it will be an error:
sed: 1: "s/\.o\s*:/_DEPS +=/": RE error: trailing backslash (\)
cf. https://bugs.freebsd.org/229925
Signed-off-by: Tobias Kortkamp <t@tobik.me>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Split debug message since eth_ntoa() uses a static result buffer.
Originally-fixed-by: Michael Bazzinotti <bazz@bazz1.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Fix memcmp() to return proper standard positive/negative values for
unequal comparisons. Current implementation is backwards (i.e. the
functions are returning negative when should be positive and
vice-versa).
Currently most consumers of these functions only check the return value
for ==0 or !=0 and so we can safely change the implementation without
breaking things.
However, there is one call that checks the polarity of this function,
and that is prf_sha1() for wireless WPA 4-way handshake. Due to the
incorrect memcmp() polarity, the WPA handshake creates an incorrect
PTK, and the handshake would fail after step 2. Undoubtedly, the AP
noticed the supplicant failed the mic check. This commit fixes that
issue.
Similar to commit 3946aa9 ("[libc] Fix strcmp()/strncmp() to return
proper values").
Signed-off-by: Michael Bazzinotti <bazz@bazz1.com>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This caused iPXE to reject images even when enough memory was
available.
Signed-off-by: David Decotigny <ddecotig@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
gensdsk currently creates a syslinux.cfg file that is invalid if the
filename ends in lkrn. Fix by setting the default target to label($b)
instead of filename($g).
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When no response is obtained from the first configured DNS server,
fall back to attempting the other configured servers.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
All implemented socket openers provide definitions for both IPv4 and
IPv6 using exactly the same opener method. Simplify the logic by
omitting the address family from the definition.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Claiming the SNP devices has the side effect of raising the TPL to
iPXE's normal operating level of TPL_CALLBACK (see the commit message
for c89a446 ("[efi] Run at TPL_CALLBACK to protect against UEFI
timers") for details). This must happen before executing any code
that relies upon the TPL having been raised to TPL_CALLBACK.
The call to efi_snp_claim() in efi_download_start() currently happens
only after the call to xfer_open(). Calling xfer_open() will
typically result in a retry timer being started, which will result in
a call to currticks() in order to initialise the timer. The call to
currticks() will drop to TPL_APPLICATION and restore to TPL_CALLBACK
in order to allow a timer tick to occur. Since this call happened
before the call to efi_snp_claim(), the restored TPL is incorrect.
This in turn results in efi_snp_claim() recording the incorrect
original TPL, causing efi_snp_release() to eventually restore the
incorrect TPL, causing the system to lock up when ExitBootServices()
is called at TPL_CALLBACK.
Fix by moving the call to efi_snp_claim() to the start of
efi_download_start().
Debugged-by: Jarrod Johnson <jjohnson2@lenovo.com>
Debugged-by: He He4 Huang <huanghe4@lenovo.com>
Debugged-by: James Wang <jameswang@ami.com.tw>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The NUL byte included within the stack cookie to act as a string
terminator should be placed at the lowest byte address within the
stack cookie, in order to avoid potentially including the stack cookie
value within an accidentally unterminated string.
Suggested-by: Pete Beck <pete.beck@ioactive.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Several of the values used to compute a stack cookie (in the absence
of a viable entropy source) will tend to have either all-zeroes or
all-ones in the higher order bits. Rotate the values in order to
distribute the (minimal) available entropy more evenly.
Suggested-by: Pete Beck <pete.beck@ioactive.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Generalise the bit rotation implementations to use a common macro, and
add roll() and rorl() to handle unsigned long values.
Each function will still compile down to a single instruction.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The only remaining use case in iPXE for the CPU direction flag is in
__memcpy_reverse() where it is set to allow the use of "rep movsb" to
perform the memory copy. This matches the equivalent functionality in
the EDK2 codebase, which has functions such as InternalMemCopyMem that
also temporarily set the direction flag in order to use "rep movsb".
As noted in commit d2fb317 ("[crypto] Avoid temporarily setting
direction flag in bigint_is_geq()"), some UEFI implementations are
known to have buggy interrupt handlers that may reboot the machine if
a timer interrupt happens to occur while the direction flag is set.
Work around these buggy UEFI implementations by using the
(unoptimised) generic_memcpy_reverse() on i386 or x86_64 UEFI
platforms.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The UEFI specification states that the calling convention for IA-32
and x64 includes "Direction flag in EFLAGS is clear". This
specification covers only the calling convention used at the point of
calling functions annotated with EFIAPI. The specification explicitly
states that other functions (such as private functions or static
library calls) are not required to follow the UEFI calling
conventions.
The reference EDK2 implementation follows this specification. In
particular, the EDK2 interrupt handlers will clear the direction flag
before calling any EFIAPI functions, and will restore the direction
flag when returning from the interrupt handler. Some EDK2 private
library functions (most notably InternalMemCopyMem) may set the
direction flag temporarily in order to make efficient use of CPU
string operations.
The current implementation of iPXE's bigint_is_geq() for i386 and
x86_64 will similarly set the direction flag temporarily in order to
make efficient use of CPU string operations.
On some UEFI implementations (observed with a Getac RX10 tablet), a
timer interrupt that happens to occur while the direction flag is set
will reboot the machine. This very strongly indicates that the UEFI
timer interrupt handler is failing to clear the direction flag before
performing an affected operation (such as copying a block of memory).
Work around such buggy UEFI implementations by rewriting
bigint_is_geq() to avoid the use of string operations and so obviate
the requirement to temporarily set the direction flag.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
A failure in device registration (e.g. due to a device with malformed
descriptors) will currently result in the port being disabled as part
of the error path. This in turn causes the hardware to detect the
device as newly connected, leading to an endless loop of failed device
registrations.
Fix by leaving the port enabled in the case of a registration failure.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When connected to a USB3 port, the AX88179 seems to have an
approximately 50% chance of producing a USB transaction error on each
of its three endpoints after being closed and reopened. The root
cause is unclear, but rewriting the USB device configuration value
seems to clear whatever internal error state has accumulated.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Experimentation shows that the existing 20ms delay is insufficient,
and often results in device detection being deferred until after iPXE
has completed startup.
Fix by increasing the delay to 100ms.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The driver-private data for root hubs is already set immediately after
allocating the USB bus. There seems to be no reason to set it again
when opening the root hub.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The "disabled" port states for USB2 and USB3 are not directly
equivalent. In particular, a disabled USB3 port will not detect new
device connections. The result is that a USB3 device disconnected
from and reconnected to an xHCI root hub port will end up reconnecting
as a USB2 device.
Fix by setting the link state to RxDetect after disabling the port, as
is already done during initialisation.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The USB3 specification removes PORT_ENABLE from the list of features
that may be cleared via a CLEAR_FEATURE request. Experimentation
shows that omitting the attempt to clear PORT_ENABLE seems to result
in the correct hotplug behaviour.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Resetting the host endpoint may immediately restart any pending
transfers for that endpoint. If the device endpoint halt has not yet
been cleared, then this will probably result in a second failed
transfer.
This second failure may be detected within usb_endpoint_reset() while
waiting for usb_clear_feature() to complete. The endpoint will
subsequently be removed from the list of halted endpoints, causing the
second failure to be effectively ignored and leaving the host endpoint
in a permanently halted state.
Fix by deferring the host endpoint reset until after the device
endpoint is ready to accept new transfers.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The ASIX USB NICs are capable of autodetecting the Ethernet link speed
and reporting it via PLSR but will not automatically update the
relevant GM and PS bits in MSR. The result is that a non-gigabit link
will fail to send or receive any packets.
The interrupt endpoint used to report link state includes the values
of the PHY BMSR and LPA registers. These are not sufficient to
differentiate between 100Mbps and 1000Mbps, since the LPA_NPAGE bit
does not necessarily indicate that the link partner is advertising
1000Mbps.
Extend axge_check_link() to write the MSR value based on the link
speed read from PLSR, and simplify the interrupt endpoint handler to
merely trigger a call to axge_check_link().
Signed-off-by: Michael Brown <mcb30@ipxe.org>
As per commit c89a446 ("[efi] Run at TPL_CALLBACK to protect against
UEFI timers") we expect to run at TPL_CALLBACK almost all of the time.
Various code paths rely on this assumption. Code paths that need to
temporarily lower the TPL (e.g. for entropy gathering) will restore it
to TPL_CALLBACK.
The entropy gathering code will be run during DRBG initialisation,
which happens during the call to startup(). In the case of iPXE
compiled as an EFI application this code will run within the scope of
efi_snp_claim() and so will execute at TPL_CALLBACK as expected.
In the case of iPXE compiled as an EFI driver the code will
incorrectly run at TPL_APPLICATION since there is nothing within the
EFI driver entry point that raises (and restores) the TPL. The net
effect is that a build that includes the entropy-gathering code
(e.g. a build with HTTPS enabled) will return from the driver entry
point at TPL_CALLBACK, which causes a system lockup.
Fix by raising and restoring the TPL within the EFI driver entry
point.
Debugged-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The EFI_RNG_PROTOCOL on the Microsoft Surface Go does not generate
random numbers. Successive calls to GetRNG() without any intervening
I/O operations (such as writing to the console) will produce identical
results. Successive reboots will produce identical results.
It is unclear what the Microsoft Surface Go is attempting to use as an
entropy source, but it is demonstrably producing zero bits of entropy.
The failure is already detected by the ANS-mandated Repetition Count
Test performed as part of our GetEntropy implementation. This
currently results in the entropy source being marked as broken, with
the result that iPXE refuses to perform any operations that require a
working entropy source.
We cannot use the existing EFI driver blacklisting mechanism to unload
the broken driver, since the RngDxe driver is integrated into the
DxeCore image.
Work around the broken driver by checking for consecutive identical
results returned by EFI_RNG_PROTOCOL and falling back to the original
timer-based entropy source.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some versions of gcc (observed with the cross-compiling gcc 9.3.0 in
Ubuntu 20.04) default to enabling -fPIE. Experimentation shows that
this results in the emission of R_AARCH64_ADR_GOT_PAGE relocation
records for __stack_chk_guard. These relocation types are not
supported by elf2efi.c.
Fix by explicitly disabling position-independent code for ARM64 EFI
builds.
Debugged-by: Antony Messerli <antony@mes.ser.li>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
GCC 10 emits warnings for implicit conversions of enumerated types.
The flexboot_nodnic code defines nodnic_queue_pair_type with values
identical to those of ib_queue_pair_type, and implicitly casts between
them. Add an explicit cast to fix the warning.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
GCC 10 produces a spurious warning about an out-of-bounds array access
for the unsized raw dword array in union intelvf_msg.
Avoid the warning by embedding the zero-length array within a struct.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
gcc10 switched default behavior from -fcommon to -fno-common. Since
"__shared" relies on the legacy behavior, explicitly specify it.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Various implementation quirks in OCSP servers make it impractical to
use anything other than SHA1 to construct the issuerNameHash and
issuerKeyHash identifiers in the request certID. For example: both
the OpenCA OCSP responder used by ipxe.org and the Boulder OCSP
responder used by LetsEncrypt will fail if SHA256 is used in the
request certID.
As of commit 6ffe28a ("[ocsp] Accept response certID with missing
hashAlgorithm parameters") we rely on asn1_digest_algorithm() to parse
the algorithm identifier in the response certID. This will fail if
SHA1 is disabled via config/crypto.h.
Fix by using a direct ASN.1 object comparison on the OID within the
algorithm identifier.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Enable -fstack-protector for EFI builds, where binary size is less
critical than for BIOS builds.
The stack cookie must be constructed immediately on entry, which
prohibits the use of any viable entropy source. Construct a cookie by
XORing together various mildly random quantities to produce a value
that will at least not be identical on each run.
On detecting a stack corruption, attempt to call Exit() with an
appropriate error. If that fails, then lock up the machine since
there is no other safe action that can be taken.
The old conditional check for support of -fno-stack-protector is
omitted since this flag dates back to GCC 4.1.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some devices (observed with a Getac RX10 tablet and docking station
containing an embedded AX88179 USB NIC) seem to be capable of
detecting link state only during the call to Initialize(), and will
occasionally erroneously report that the link is down for the first
few such calls.
Work around these devices by retrying the Initialize() call multiple
times, terminating early if a link is detected. The eventual absence
of a link is treated as a non-fatal error, since it is entirely
possible that the link really is down.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown
Dentcho Ludmilov Bankov
Ignat Korchagin
Joe Groocock
Rob Taglang
Ben Bleything
Andrew Grasso
Daniel Johnson
Tobias Kortkamp
Michael J. Bazzinotti
David Decotigny
Bobby Lockwood
bit
LaDerrick H
Bruce Rogers