Place the call to adjust_pci_device() back in the individual drivers,

since we probably shouldn't be doing this to arbitrary devices during a
PCI bus scan...

src/drivers/bus/pci.c

@@ -185,9 +185,6 @@ int find_pci_device ( struct pci_device *pci,
 			continue;
 		}
 		
-		/* Fix up PCI device */
-		adjust_pci_device ( pci );
-		
 		/* If driver has a class, and class matches, use it */
 		if ( driver->class && 
 		     ( driver->class == pci->class ) ) {

src/drivers/net/3c90x.c

@@ -703,6 +703,8 @@ static int a3c90x_probe ( struct dev *dev, struct pci_device *pci ) {
     if (pci->ioaddr == 0)
           return 0;
 
+    adjust_pci_device(pci);
+
     nic->ioaddr = pci->ioaddr;
     nic->irqno = 0;
 

src/drivers/net/eepro100.c

@@ -620,6 +620,8 @@ static int eepro100_probe ( struct dev *dev, struct pci_device *p ) {
 	ioaddr = p->ioaddr;
 	nic->ioaddr = ioaddr;
 
+	adjust_pci_device(p);
+
 	/* Copy IRQ from PCI information */
 	nic->irqno = p->irq;
 

src/drivers/net/mtd80x.c

@@ -684,6 +684,8 @@ static int mtd_probe ( struct dev *dev, struct pci_device *pci ) {
     /* Mask the bit that says "this is an io addr" */
     mtdx.ioaddr = pci->ioaddr;
 
+    adjust_pci_device(pci);
+
     mtdx.nic_name = dev->name;
     mtdx.dev_id = pci->dev_id;
 

src/drivers/net/natsemi.c

@@ -253,6 +253,8 @@ natsemi_probe ( struct dev *dev, struct pci_device *pci ) {
     if (pci->ioaddr == 0)
         return 0;
 
+    adjust_pci_device(pci);
+
     /* initialize some commonly used globals */
 	
     nic->irqno  = 0;

src/drivers/net/rtl8139.c

@@ -194,6 +194,8 @@ static int rtl8139_probe ( struct dev *dev, struct pci_device *pci ) {
 	nic->ioaddr = pci->ioaddr;
 	nic->irqno = pci->irq;
 
+	adjust_pci_device(pci);
+
 	/* Bring the chip out of low-power mode. */
 	outb(0x00, nic->ioaddr + Config1);
 

src/drivers/net/tg3.c

@@ -3239,6 +3239,8 @@ static int tg3_probe ( struct dev *dev, struct pci_device *pdev ) {
 
 	memset(tp, 0, sizeof(*tp));
 
+	adjust_pci_device(pdev);
+
 	nic->irqno  = 0;
 	nic->ioaddr = pdev->ioaddr;
 
@@ -3342,7 +3344,6 @@ static int tg3_probe ( struct dev *dev, struct pci_device *pdev ) {
 	}
 
 	nic->nic_op	= &tg3_operations;
-
 	return 1;
 
  err_out_iounmap:

src/drivers/net/tlan.c

@@ -795,6 +795,9 @@ static int tlan_probe ( struct dev *dev, struct pci_device *pci ) {
 
 	BASE = pci->ioaddr;
 
+	/* Set nic as PCI bus master */
+	adjust_pci_device(pci);
+	
 	/* Point to private storage */
 	priv = &TLanPrivateInfo;
 

src/drivers/net/via-rhine.c

@@ -962,12 +962,11 @@ rhine_probe ( struct dev *dev, struct pci_device *pci ) {
 	return 0;
     rhine_probe1 (nic, pci, pci->ioaddr, pci->dev_id, -1);
 
+    adjust_pci_device ( pci );
     rhine_reset (nic);
     nic->nic_op	= &rhine_operations;
     nic->irqno	  = pci->irq;
     nic->ioaddr   = tp->ioaddr;
-
-
     return 1;
 }