source: installer/opengnsys_installer.sh @ b411a0f

#!/bin/bash

#####################################################################
####### Script instalador OpenGnsys
####### Autor: Luis Guillén <lguillen@unizar.es>
#####################################################################


####  AVISO: Puede editar configuración de acceso por defecto.
####  WARNING: Edit default access configuration if you wish.
DEFAULT_MYSQL_ROOT_PASSWORD="passwordroot"      # Clave por defecto root de MySQL
DEFAULT_OPENGNSYS_DB_USER="usuog"               # Usuario por defecto de acceso a la base de datos
DEFAULT_OPENGNSYS_DB_PASSWD="passusuog"         # Clave por defecto de acceso a la base de datos
DEFAULT_OPENGNSYS_CLIENT_PASSWD="og"            # Clave por defecto de acceso del cliente       

# Sólo ejecutable por usuario root
if [ "$(whoami)" != 'root' ]; then
        echo "ERROR: this program must run under root privileges!!"
        exit 1
fi

echo -e "\\nOpenGnsys Installation"
echo "=============================="

# Clave root de MySQL
while : ; do
        echo -n -e "\\nEnter root password for MySQL (${DEFAULT_MYSQL_ROOT_PASSWORD}): ";
        read -r MYSQL_ROOT_PASSWORD
        if [ -n "${MYSQL_ROOT_PASSWORD//[a-zA-Z0-9]/}" ]; then # Comprobamos que sea un valor alfanumerico
                echo -e "\\aERROR: Must be alphanumeric, try again..."
        else
                # Si esta vacio ponemos el valor por defecto
                MYSQL_ROOT_PASSWORD="${MYSQL_ROOT_PASSWORD:-$DEFAULT_MYSQL_ROOT_PASSWORD}"
                break
        fi
done

# Usuario de acceso a la base de datos
while : ; do
        echo -n -e "\\nEnter username for OpenGnsys console (${DEFAULT_OPENGNSYS_DB_USER}): "
        read -r OPENGNSYS_DB_USER
        if [ -n "${OPENGNSYS_DB_USER//[a-zA-Z0-9]/}" ]; then # Comprobamos que sea un valor alfanumerico
                echo -e "\\aERROR: Must be alphanumeric, try again..."
        else
                # Si esta vacio ponemos el valor por defecto
                OPENGNSYS_DB_USER="${OPENGNSYS_DB_USER:-$DEFAULT_OPENGNSYS_DB_USER}"
                break
        fi
done

# Clave de acceso a la base de datos
while : ; do
        echo -n -e "\\nEnter password for OpenGnsys console (${DEFAULT_OPENGNSYS_DB_PASSWD}): "
        read -r OPENGNSYS_DB_PASSWD
        if [ -n "${OPENGNSYS_DB_PASSWD//[a-zA-Z0-9]/}" ]; then # Comprobamos que sea un valor alfanumerico
                echo -e "\\aERROR: Must be alphanumeric, try again..."
        else
                # Si esta vacio ponemos el valor por defecto
                OPENGNSYS_DB_PASSWD="${OPENGNSYS_DB_PASSWD:-$DEFAULT_OPENGNSYS_DB_PASSWD}"
                break
        fi
done

# Clave de acceso del cliente
while : ; do
        echo -n -e "\\nEnter root password for OpenGnsys client (${DEFAULT_OPENGNSYS_CLIENT_PASSWD}): "
        read -r OPENGNSYS_CLIENT_PASSWD
        if [ -n "${OPENGNSYS_CLIENT_PASSWD//[a-zA-Z0-9]/}" ]; then # Comprobamos que sea un valor alfanumerico
                echo -e "\\aERROR: Must be alphanumeric, try again..."
        else
                # Si esta vacio ponemos el valor por defecto
                OPENGNSYS_CLIENT_PASSWD="${OPENGNSYS_CLIENT_PASSWD:-$DEFAULT_OPENGNSYS_CLIENT_PASSWD}"
                break
        fi
done

# Selección de clientes ogLive para descargar.
while : ; do
        echo -e "\\nChoose ogLive client to install."
        echo -e "1) Kernel 4.13, 64-bit, EFI-compatible"
        echo -e "2) Kernel 3.2, 32-bit"
        echo -e "3) Both"
        echo -n -e "Please, type a valid number (1): "
        read -r OPT
        case "$OPT" in
                1|"")   OGLIVE="ogLive-xenial-4.13.0-17-generic-amd64-r5520.iso"
                        break ;;
                2)      OGLIVE="ogLive-precise-3.2.0-23-generic-r5159.iso"
                        break ;;
                3)      OGLIVE="ogLive-xenial-4.13.0-17-generic-amd64-r5520.iso ogLive-precise-3.2.0-23-generic-r5159.iso";
                        break ;;
                *)      echo -e "\\aERROR: unknown option, try again."
        esac
done

echo -e "\\n=============================="

# Comprobar si se ha descargado el paquete comprimido (REMOTE=0) o sólo el instalador (REMOTE=1).
PROGRAMDIR=$(readlink -e "$(dirname "$0")")
PROGRAMNAME=$(basename "$0")
OPENGNSYS_SERVER="opengnsys.es"
DOWNLOADURL="https://$OPENGNSYS_SERVER/trac/downloads"
if [ -d "$PROGRAMDIR/../installer" ]; then
        REMOTE=0
else
        REMOTE=1
fi
BRANCH="devel"
CODE_URL="https://codeload.github.com/opengnsys/OpenGnsys/zip/$BRANCH"
API_URL="https://api.github.com/repos/opengnsys/OpenGnsys/branches/$BRANCH"

WORKDIR=/tmp/opengnsys_installer
mkdir -p $WORKDIR

# Directorio destino de OpenGnsys.
INSTALL_TARGET=/opt/opengnsys
PATH=$PATH:$INSTALL_TARGET/bin

# Registro de incidencias.
OGLOGFILE=$INSTALL_TARGET/log/${PROGRAMNAME%.sh}.log
LOG_FILE=/tmp/$(basename $OGLOGFILE)

# Usuario del cliente para acceso remoto.
OPENGNSYS_CLIENT_USER="opengnsys"

# Nombre de la base datos y fichero SQL para su creación.
OPENGNSYS_DATABASE="ogAdmBD"
OPENGNSYS_DB_CREATION_FILE=opengnsys/admin/Database/${OPENGNSYS_DATABASE}.sql


#####################################################################
####### Funciones de configuración
#####################################################################

# Generar variables de configuración del instalador
# Variables globales:
# - OSDISTRIB, OSVERSION - tipo y versión de la distribución GNU/Linux
# - DEPENDENCIES - array de dependencias que deben estar instaladas
# - UPDATEPKGLIST, INSTALLPKGS, CHECKPKGS - comandos para gestión de paquetes
# - INSTALLEXTRADEPS - instalar dependencias no incluidas en la distribución
# - STARTSERVICE, ENABLESERVICE - iniciar y habilitar un servicio
# - STOPSERVICE, DISABLESERVICE - parar y deshabilitar un servicio
# - APACHESERV, APACHECFGDIR, APACHESITESDIR, APACHEUSER, APACHEGROUP - servicio y configuración de Apache
# - APACHEENABLEMODS, APACHEENABLESSL, APACHEMAKECERT - habilitar módulos y certificado SSL
# - APACHEENABLEOG, APACHEOGSITE, - habilitar sitio web de OpenGnsys
# - PHPFPMSERV - servicio PHP FastCGI Process Manager para Apache
# - INETDSERV - servicio Inetd
# - FIREWALLSERV - servicio de cortabuegos IPTables/FirewallD
# - DHCPSERV, DHCPCFGDIR - servicio y configuración de DHCP
# - MYSQLSERV, TMPMYCNF - servicio MySQL y fichero temporal con credenciales de acceso
# - MARIADBSERV - servicio MariaDB (sustituto de MySQL en algunas distribuciones)
# - RSYNCSERV, RSYNCCFGDIR - servicio y configuración de Rsync
# - SAMBASERV, SAMBACFGDIR - servicio y configuración de Samba
# - TFTPSERV, TFTPCFGDIR - servicio y configuración de TFTP/PXE
function autoConfigure()
{
# Detectar sistema operativo del servidor (compatible con fichero os-release y con LSB).
if [ -f /etc/os-release ]; then
        source /etc/os-release
        OSDISTRIB="$ID"
        OSVERSION="$VERSION_ID"
else
        OSDISTRIB=$(lsb_release -is 2>/dev/null)
        OSVERSION=$(lsb_release -rs 2>/dev/null)
fi
# Convertir distribución a minúsculas y obtener solo el 1er número de versión.
OSDISTRIB="${OSDISTRIB,,}"
OSVERSION="${OSVERSION%%.*}"

# Configuración según la distribución GNU/Linux (usar minúsculas).
case "$OSDISTRIB" in
        ubuntu|debian|linuxmint)
                DEPENDENCIES=( subversion apache2 php php-ldap php-fpm mysql-server php-mysql isc-dhcp-server bittorrent tftp-hpa tftpd-hpa xinetd build-essential g++-multilib libmysqlclient-dev wget curl doxygen graphviz bittornado ctorrent samba rsync unzip netpipes debootstrap schroot squashfs-tools btrfs-tools procps arp-scan realpath php-curl gettext moreutils jq wakeonlan udpcast shim-signed grub-efi-amd64-signed )
                UPDATEPKGLIST="apt-get update"
                INSTALLPKG="apt-get -y install --force-yes"
                CHECKPKG="dpkg -s \$package 2>/dev/null | grep Status | grep -qw install"
                if which service &>/dev/null; then
                        STARTSERVICE="eval service \$service restart"
                        STOPSERVICE="eval service \$service stop"
                else
                        STARTSERVICE="eval /etc/init.d/\$service restart"
                        STOPSERVICE="eval /etc/init.d/\$service stop"
                fi
                ENABLESERVICE="eval update-rc.d \$service defaults"
                DISABLESERVICE="eval update-rc.d \$service disable"
                APACHESERV=apache2
                APACHECFGDIR=/etc/apache2
                APACHESITESDIR=sites-available
                APACHEOGSITE=opengnsys
                APACHEUSER="www-data"
                APACHEGROUP="www-data"
                APACHEENABLEMODS="a2enmod ssl rewrite proxy_fcgi fastcgi actions alias"
                APACHEENABLESSL="a2ensite default-ssl"
                APACHEENABLEOG="a2ensite $APACHEOGSITE"
                APACHEMAKECERT="make-ssl-cert generate-default-snakeoil --force-overwrite"
                DHCPSERV=isc-dhcp-server
                DHCPCFGDIR=/etc/dhcp
                INETDSERV=xinetd
                INETDCFGDIR=/etc/xinetd.d
                MYSQLSERV=mysql
                MARIADBSERV=mariadb
                PHPFPMSERV=php-fpm
                RSYNCSERV=rsync
                RSYNCCFGDIR=/etc
                SAMBASERV=smbd
                SAMBACFGDIR=/etc/samba
                TFTPCFGDIR=/var/lib/tftpboot
                ;;
        fedora|centos)
                DEPENDENCIES=( subversion httpd mod_ssl php-ldap php-fpm mysql-server mysql-devel mysql-devel.i686 php-mysql dhcp tftp-server tftp xinetd binutils gcc gcc-c++ glibc-devel glibc-devel.i686 glibc-static glibc-static.i686 libstdc++-devel.i686 make wget curl doxygen graphviz ctorrent samba samba-client rsync unzip debootstrap schroot squashfs-tools python-crypto arp-scan procps-ng gettext moreutils jq net-tools udpcast shim-x64 grub2-efi-x64 grub2-efi-x64-modules http://ftp.altlinux.org/pub/distributions/ALTLinux/5.1/branch/$(arch)/RPMS.classic/netpipes-4.2-alt1.$(arch).rpm )
                [ "$OSDISTRIB" == "centos" ] && UPDATEPKGLIST="yum install -y https://dl.fedoraproject.org/pub/epel/epel-release-latest-$OSVERSION.noarch.rpm http://rpms.remirepo.net/enterprise/remi-release-$OSVERSION.rpm"
                INSTALLEXTRADEPS=( 'pushd /tmp; wget -t3 http://ftp.acc.umu.se/mirror/bittornado/BitTornado-0.3.18.tar.gz && tar xvzf BitTornado-0.3.18.tar.gz && cd BitTornado-CVS && python setup.py install && ln -fs btlaunchmany.py /usr/bin/btlaunchmany && ln -fs bttrack.py /usr/bin/bttrack; popd' )
                INSTALLPKG="yum install -y libstdc++ libstdc++.i686"
                CHECKPKG="rpm -q --quiet \$package"
                SYSTEMD=$(which systemctl 2>/dev/null)
                if [ -n "$SYSTEMD" ]; then
                        STARTSERVICE="eval systemctl start \$service.service"
                        STOPSERVICE="eval systemctl stop \$service.service"
                        ENABLESERVICE="eval systemctl enable \$service.service"
                        DISABLESERVICE="eval systemctl disable \$service.service"
                else
                        STARTSERVICE="eval service \$service start"
                        STOPSERVICE="eval service \$service stop"
                        ENABLESERVICE="eval chkconfig \$service on"
                        DISABLESERVICE="eval chkconfig \$service off"
                fi
                APACHESERV=httpd
                APACHECFGDIR=/etc/httpd/conf.d
                APACHEOGSITE=opengnsys.conf
                APACHEUSER="apache"
                APACHEGROUP="apache"
                APACHEREWRITEMOD="sed -i '/rewrite/s/^#//' $APACHECFGDIR/../*.conf"
                DHCPSERV=dhcpd
                DHCPCFGDIR=/etc/dhcp
                if firewall-cmd --state &>/dev/null; then
                        FIREWALLSERV=firewalld
                else
                        FIREWALLSERV=iptables
                fi
                INETDSERV=xinetd
                INETDCFGDIR=/etc/xinetd.d
                MYSQLSERV=mysqld
                MARIADBSERV=mariadb
                PHPFPMSERV=php-fpm
                RSYNCSERV=rsync
                RSYNCCFGDIR=/etc
                SAMBASERV=smb
                SAMBACFGDIR=/etc/samba
                TFTPSERV=tftp
                TFTPCFGDIR=/var/lib/tftpboot
                ;;
        "")     echo "ERROR: Unknown Linux distribution, please install \"lsb_release\" command."
                exit 1 ;;
        *)      echo "ERROR: Distribution not supported by OpenGnsys."
                exit 1 ;;
esac

# Fichero de credenciales de acceso a MySQL.
TMPMYCNF=/tmp/.my.cnf.$$
}


# Modificar variables de configuración tras instalar paquetes del sistema.
function autoConfigurePost()
{
local f

# Configuraciones específicas para Samba y TFTP en Debian 6.
[ -z "$SYSTEMD" -a ! -e /etc/init.d/$SAMBASERV ] && SAMBASERV=samba
[ ! -e $TFTPCFGDIR ] && TFTPCFGDIR=/srv/tftp

# Configuraciones específicas para SELinux permisivo en distintas versiones.
[ -f /selinux/enforce ] && echo 0 > /selinux/enforce
for f in /etc/sysconfig/selinux /etc/selinux/config; do
        [ -f $f ] && perl -pi -e 's/SELINUX=enforcing/SELINUX=permissive/g' $f
done
selinuxenabled 2>/dev/null && setenforce 0 2>/dev/null
}


# Cargar lista de paquetes del sistema y actualizar algunas variables de configuración
# dependiendo de la versión instalada.
function updatePackageList()
{
local DHCPVERSION PHP7VERSION

# Si es necesario, actualizar la lista de paquetes disponibles.
[ -n "$UPDATEPKGLIST" ] && eval $UPDATEPKGLIST

# Configuración personallizada de algunos paquetes.
case "$OSDISTRIB" in
        ubuntu|linuxmint)       # Postconfiguación personalizada para Ubuntu.
                # Configuración para DHCP v3.
                DHCPVERSION=$(apt-cache show $(apt-cache pkgnames|egrep "dhcp.?-server$") | \
                              awk '/Version/ {print substr($2,1,1);}' | \
                              sort -n | tail -1)
                if [ $DHCPVERSION = 3 ]; then
                        DEPENDENCIES=( ${DEPENDENCIES[@]/isc-dhcp-server/dhcp3-server} )
                        DHCPSERV=dhcp3-server
                        DHCPCFGDIR=/etc/dhcp3
                fi
                # Configuración para PHP 7 en Ubuntu.
                if [ -z "$(apt-cache pkgnames php7)" ]; then
                        eval $INSTALLPKG software-properties-common
                        add-apt-repository -y ppa:ondrej/php
                        eval $UPDATEPKGLIST
                        PHP7VERSION=$(apt-cache pkgnames php7 | sort | head -1)
                        PHPFPMSERV="${PHP7VERSION}-fpm"
                        DEPENDENCIES=( ${DEPENDENCIES[@]//php/$PHP7VERSION} )
                fi
                # Adaptar dependencias para libmysqlclient.
                [ -z "$(apt-cache pkgnames libmysqlclient-dev)" ] && [ -n "$(apt-cache pkgnames libmysqlclient15)" ] && DEPENDENCIES=( ${DEPENDENCIES[@]//libmysqlclient-dev/libmysqlclient15} )
                # Paquete correcto para realpath.
                [ -z "$(apt-cache pkgnames realpath)" ] && DEPENDENCIES=( ${DEPENDENCIES[@]//realpath/coreutils} )
                ;;
        centos) # Postconfiguación personalizada para CentOS.
                # Configuración para PHP 7.
                PHP7VERSION=$(yum list -q php7\* 2>/dev/null | awk -F. '/^php/ {print $1; exit;}')
                PHPFPMSERV="${PHP7VERSION}-${PHPFPMSERV}"
                DEPENDENCIES=( ${PHP7VERSION} ${DEPENDENCIES[@]//php/$PHP7VERSION-php} )
                # Cambios a aplicar a partir de CentOS 7.
                if [ $OSVERSION -ge 7 ]; then
                        # Sustituir MySQL por MariaDB.
                        DEPENDENCIES=( ${DEPENDENCIES[*]/mysql-/mariadb-} )
                        # Instalar ctorrent de EPEL para CentOS 6 (no disponible en CentOS 7).
                        DEPENDENCIES=( ${DEPENDENCIES[*]/ctorrent/http://dl.fedoraproject.org/pub/epel/6/$(arch)/Packages/c/ctorrent-1.3.4-14.dnh3.3.2.el6.$(arch).rpm} )
                fi
                ;;
        fedora) # Postconfiguación personalizada para Fedora. 
                # Incluir paquetes específicos.
                DEPENDENCIES=( ${DEPENDENCIES[@]} btrfs-progs )
                # Sustituir MySQL por MariaDB a partir de Fedora 20.
                [ $OSVERSION -ge 20 ] && DEPENDENCIES=( ${DEPENDENCIES[*]/mysql-/mariadb-} )
                ;;
esac
}


#####################################################################
####### Algunas funciones útiles de propósito general:
#####################################################################

function getDateTime()
{
        date "+%Y%m%d-%H%M%S"
}

# Escribe a fichero y muestra por pantalla
function echoAndLog()
{
        local DATETIME=`getDateTime`
        echo "$1"
        echo "$DATETIME;$SSH_CLIENT;$1" >> $LOG_FILE
}

# Escribe a fichero y muestra mensaje de error
function errorAndLog()
{
        local DATETIME=`getDateTime`
        echo "ERROR: $1"
        echo "$DATETIME;$SSH_CLIENT;ERROR: $1" >> $LOG_FILE
}

# Escribe a fichero y muestra mensaje de aviso
function warningAndLog()
{
        local DATETIME=`getDateTime`
        echo "Warning: $1"
        echo "$DATETIME;$SSH_CLIENT;Warning: $1" >> $LOG_FILE
}

# Comprueba si el elemento pasado en $2 está en el array $1
function isInArray()
{
        if [ $# -ne 2 ]; then
                errorAndLog "${FUNCNAME}(): invalid number of parameters"
                exit 1
        fi

        local deps
        local is_in_array=1
        local element="$2"

        echoAndLog "${FUNCNAME}(): checking if $2 is in $1"
        eval "deps=( \"\${$1[@]}\" )"

        # Copia local del array del parámetro 1.
        for (( i = 0 ; i < ${#deps[@]} ; i++ )); do
                if [ "${deps[$i]}" = "${element}" ]; then
                        echoAndLog "isInArray(): $element found in array"
                        is_in_array=0
                fi
        done

        if [ $is_in_array -ne 0 ]; then
                echoAndLog "${FUNCNAME}(): $element NOT found in array"
        fi

        return $is_in_array
}


#####################################################################
####### Funciones de manejo de paquetes Debian
#####################################################################

function checkPackage()
{
        package=$1
        if [ -z $package ]; then
                errorAndLog "${FUNCNAME}(): parameter required"
                exit 1
        fi
        echoAndLog "${FUNCNAME}(): checking if package $package exists"
        eval $CHECKPKG
        if [ $? -eq 0 ]; then
                echoAndLog "${FUNCNAME}(): package $package exists"
                return 0
        else
                echoAndLog "${FUNCNAME}(): package $package doesn't exists"
                return 1
        fi
}

# Recibe array con dependencias
# por referencia deja un array con las dependencias no resueltas
# devuelve 1 si hay alguna dependencia no resuelta
function checkDependencies()
{
        if [ $# -ne 2 ]; then
                errorAndLog "${FUNCNAME}(): invalid number of parameters"
                exit 1
        fi

        echoAndLog "${FUNCNAME}(): checking dependences"
        uncompletedeps=0

        # copia local del array del parametro 1
        local deps
        eval "deps=( \"\${$1[@]}\" )"

        declare -a local_notinstalled

        for (( i = 0 ; i < ${#deps[@]} ; i++ ))
        do
                checkPackage ${deps[$i]}
                if [ $? -ne 0 ]; then
                        local_notinstalled[$uncompletedeps]=$package
                        let uncompletedeps=uncompletedeps+1
                fi
        done

        # relleno el array especificado en $2 por referencia
        for (( i = 0 ; i < ${#local_notinstalled[@]} ; i++ ))
        do
                eval "${2}[$i]=${local_notinstalled[$i]}"
        done

        # retorna el numero de paquetes no resueltos
        echoAndLog "${FUNCNAME}(): dependencies uncompleted: $uncompletedeps"
        return $uncompletedeps
}

# Recibe un array con las dependencias y lo instala
function installDependencies()
{
        if [ $# -ne 1 ]; then
                errorAndLog "${FUNCNAME}(): invalid number of parameters"
                exit 1
        fi
        echoAndLog "${FUNCNAME}(): installing uncompleted dependencies"

        # copia local del array del parametro 1
        local deps
        eval "deps=( \"\${$1[@]}\" )"

        local string_deps=""
        for (( i = 0 ; i < ${#deps[@]} ; i++ ))
        do
                string_deps="$string_deps ${deps[$i]}"
        done

        if [ -z "${string_deps}" ]; then
                errorAndLog "${FUNCNAME}(): array of dependeces is empty"
                exit 1
        fi

        OLD_DEBIAN_FRONTEND=$DEBIAN_FRONTEND            # Debian/Ubuntu
        export DEBIAN_FRONTEND=noninteractive

        echoAndLog "${FUNCNAME}(): now $string_deps will be installed"
        eval $INSTALLPKG $string_deps
        if [ $? -ne 0 ]; then
                errorAndLog "${FUNCNAME}(): error installing dependencies"
                return 1
        fi

        DEBIAN_FRONTEND=$OLD_DEBIAN_FRONTEND            # Debian/Ubuntu
        test grep -q "EPEL temporal" /etc/yum.repos.d/epel.repo 2>/dev/null || mv -f /etc/yum.repos.d/epel.repo.rpmnew /etc/yum.repos.d/epel.repo 2>/dev/null   # CentOS/RedHat EPEL

        echoAndLog "${FUNCNAME}(): dependencies installed"
}

# Hace un backup del fichero pasado por parámetro
# deja un -last y uno para el día
function backupFile()
{
        if [ $# -ne 1 ]; then
                errorAndLog "${FUNCNAME}(): invalid number of parameters"
                exit 1
        fi

        local file="$1"
        local dateymd=`date +%Y%m%d`

        if [ ! -f "$file" ]; then
                warningAndLog "${FUNCNAME}(): file $file doesn't exists"
                return 1
        fi

        echoAndLog "${FUNCNAME}(): making $file backup"

        # realiza una copia de la última configuración como last
        cp -a "$file" "${file}-LAST"

        # si para el día no hay backup lo hace, sino no
        if [ ! -f "${file}-${dateymd}" ]; then
                cp -a "$file" "${file}-${dateymd}"
        fi

        echoAndLog "${FUNCNAME}(): $file backup success"
}

#####################################################################
####### Funciones para el manejo de bases de datos
#####################################################################

# This function set password to root
function mysqlSetRootPassword()
{
        if [ $# -ne 1 ]; then
                errorAndLog "${FUNCNAME}(): invalid number of parameters"
                exit 1
        fi

        local root_mysql="$1"
        echoAndLog "${FUNCNAME}(): setting root password in MySQL server"
        mysqladmin -u root password "$root_mysql"
        if [ $? -ne 0 ]; then
                errorAndLog "${FUNCNAME}(): error while setting root password in MySQL server"
                return 1
        fi
        echoAndLog "${FUNCNAME}(): root password saved!"
        return 0
}

# Si el servicio mysql esta ya instalado cambia la variable de la clave del root por la ya existente
function mysqlGetRootPassword()
{
        local pass_mysql
        local pass_mysql2
        # Comprobar si MySQL está instalado con la clave de root por defecto.
        if mysql -u root -p"$MYSQL_ROOT_PASSWORD" <<<"quit" 2>/dev/null; then
                echoAndLog "${FUNCNAME}(): Using default mysql root password."
        else
                stty -echo
                echo "There is a MySQL service already installed."
                read -p "Enter MySQL root password: " pass_mysql
                echo ""
                read -p "Confrim password:" pass_mysql2
                echo ""
                stty echo
                if [ "$pass_mysql" == "$pass_mysql2" ] ;then
                        MYSQL_ROOT_PASSWORD="$pass_mysql"
                        return 0
                else
                        echo "The keys don't match. Do not configure the server's key,"
                        echo "transactions in the database will give error."
                        return 1
                fi
        fi
}

# comprueba si puede conectar con mysql con el usuario root
function mysqlTestConnection()
{
        if [ $# -ne 1 ]; then
                errorAndLog "${FUNCNAME}(): invalid number of parameters"
                exit 1
        fi

        local root_password="$1"
        echoAndLog "${FUNCNAME}(): checking connection to mysql..."
        # Componer fichero con credenciales de conexión a MySQL.
        touch $TMPMYCNF
        chmod 600 $TMPMYCNF
        cat << EOT > $TMPMYCNF
[client]
user=root
password=$root_password
EOT
        # Borrar el fichero temporal si termina el proceso de instalación.
        trap "rm -f $TMPMYCNF" 0 1 2 3 6 9 15
        # Comprobar conexión a MySQL.
        echo "" | mysql --defaults-extra-file=$TMPMYCNF
        if [ $? -ne 0 ]; then
                errorAndLog "${FUNCNAME}(): connection to mysql failed, check root password and if daemon is running!"
                return 1
        else
                echoAndLog "${FUNCNAME}(): connection success"
                return 0
        fi
}

# comprueba si la base de datos existe
function mysqlDbExists()
{
        if [ $# -ne 1 ]; then
                errorAndLog "${FUNCNAME}(): invalid number of parameters"
                exit 1
        fi

        local database="$1"
        echoAndLog "${FUNCNAME}(): checking if $database exists..."
        echo "show databases" | mysql --defaults-extra-file=$TMPMYCNF | grep "^${database}$"
        if [ $? -ne 0 ]; then
                echoAndLog "${FUNCNAME}():database $database doesn't exists"
                return 1
        else
                echoAndLog "${FUNCNAME}():database $database exists"
                return 0
        fi
}

# Comprueba si la base de datos está vacía.
function mysqlCheckDbIsEmpty()
{
        if [ $# -ne 1 ]; then
                errorAndLog "${FUNCNAME}(): invalid number of parameters"
                exit 1
        fi

        local database="$1"
        echoAndLog "${FUNCNAME}(): checking if $database is empty..."
        num_tablas=`echo "show tables" | mysql --defaults-extra-file=$TMPMYCNF "${database}" | wc -l`
        if [ $? -ne 0 ]; then
                errorAndLog "${FUNCNAME}(): error executing query, check database and root password"
                exit 1
        fi

        if [ $num_tablas -eq 0 ]; then
                echoAndLog "${FUNCNAME}():database $database is empty"
                return 0
        else
                echoAndLog "${FUNCNAME}():database $database has tables"
                return 1
        fi

}

# Importa un fichero SQL en la base de datos.
# Parámetros:
# - 1: nombre de la BD.
# - 2: fichero a importar.
# Nota: el fichero SQL puede contener las siguientes palabras reservadas:
# - SERVERIP: se sustituye por la dirección IP del servidor.
# - DBUSER: se sustituye por usuario de conexión a la BD definido en este script.
# - DBPASSWD: se sustituye por la clave de conexión a la BD definida en este script.
function mysqlImportSqlFileToDb()
{
        if [ $# -ne 2 ]; then
                errorAndLog "${FNCNAME}(): invalid number of parameters"
                exit 1
        fi

        local database="$1"
        local sqlfile="$2"
        local tmpfile=$(mktemp)
        local i=0
        local dev=""
        local status
        # Claves aleatorias para acceso a las APIs REST.
        local OPENGNSYS_APIKEY=$(php -r 'echo md5(uniqid(rand(), true));')
        OPENGNSYS_REPOKEY=$(php -r 'echo md5(uniqid(rand(), true));')

        if [ ! -f $sqlfile ]; then
                errorAndLog "${FUNCNAME}(): Unable to locate $sqlfile!!"
                return 1
        fi

        echoAndLog "${FUNCNAME}(): importing SQL file to ${database}..."
        chmod 600 $tmpfile
        for dev in ${DEVICE[*]}; do
                if [ "${DEVICE[i]}" == "$DEFAULTDEV" ]; then
                        sed -e "s/SERVERIP/${SERVERIP[i]}/g" \
                            -e "s/DBUSER/$OPENGNSYS_DB_USER/g" \
                            -e "s/DBPASSWORD/$OPENGNSYS_DB_PASSWD/g" \
                            -e "s/APIKEY/$OPENGNSYS_APIKEY/g" \
                            -e "s/REPOKEY/$OPENGNSYS_REPOKEY/g" \
                                $sqlfile > $tmpfile
                fi
                let i++
        done
        mysql --defaults-extra-file=$TMPMYCNF --default-character-set=utf8 "${database}" < $tmpfile
        status=$?
        rm -f $tmpfile
        if [ $status -ne 0 ]; then
                errorAndLog "${FUNCNAME}(): error while importing $sqlfile in database $database"
                return 1
        fi
        echoAndLog "${FUNCNAME}(): file imported to database $database"
        return 0
}

# Crea la base de datos
function mysqlCreateDb()
{
        if [ $# -ne 1 ]; then
                errorAndLog "${FUNCNAME}(): invalid number of parameters"
                exit 1
        fi

        local database="$1"

        echoAndLog "${FUNCNAME}(): creating database..."
        mysqladmin --defaults-extra-file=$TMPMYCNF create $database
        if [ $? -ne 0 ]; then
                errorAndLog "${FUNCNAME}(): error while creating database $database"
                return 1
        fi
        # Quitar modo ONLY_FULL_GROUP_BY de MySQL (ticket #730).
        mysql --defaults-extra-file=$TMPMYCNF -e "SET GLOBAL sql_mode=(SELECT TRIM(BOTH ',' FROM REPLACE(@@sql_mode,'ONLY_FULL_GROUP_BY','')));"

        echoAndLog "${FUNCNAME}(): database $database created"
        return 0
}

# Comprueba si ya está definido el usuario de acceso a la BD.
function mysqlCheckUserExists()
{
        if [ $# -ne 1 ]; then
                errorAndLog "${FUNCNAME}(): invalid number of parameters"
                exit 1
        fi

        local userdb="$1"

        echoAndLog "${FUNCNAME}(): checking if $userdb exists..."
        echo "select user from user where user='${userdb}'\\G" |mysql --defaults-extra-file=$TMPMYCNF mysql | grep user
        if [ $? -ne 0 ]; then
                echoAndLog "${FUNCNAME}(): user doesn't exists"
                return 1
        else
                echoAndLog "${FUNCNAME}(): user already exists"
                return 0
        fi

}

# Crea un usuario administrativo para la base de datos
function mysqlCreateAdminUserToDb()
{
        if [ $# -ne 3 ]; then
                errorAndLog "${FUNCNAME}(): invalid number of parameters"
                exit 1
        fi

        local database="$1"
        local userdb="$2"
        local passdb="$3"

        echoAndLog "${FUNCNAME}(): creating admin user ${userdb} to database ${database}"

        cat > $WORKDIR/create_${database}.sql <<EOF
GRANT USAGE ON *.* TO '${userdb}'@'localhost' IDENTIFIED BY '${passdb}' ;
GRANT ALL PRIVILEGES ON ${database}.* TO '${userdb}'@'localhost' WITH GRANT OPTION ;
FLUSH PRIVILEGES ;
EOF
        mysql --defaults-extra-file=$TMPMYCNF < $WORKDIR/create_${database}.sql
        if [ $? -ne 0 ]; then
                errorAndLog "${FUNCNAME}(): error while creating user in mysql"
                rm -f $WORKDIR/create_${database}.sql
                return 1
        else
                echoAndLog "${FUNCNAME}(): user created ok"
                rm -f $WORKDIR/create_${database}.sql
                return 0
        fi
}


#####################################################################
####### Funciones para la descarga de código
#####################################################################

# Obtiene el código fuente del proyecto desde el repositorio de GitHub.
function downloadCode()
{
        if [ $# -ne 1 ]; then
                errorAndLog "${FUNCNAME}(): invalid number of parameters"
                exit 1
        fi

        local url="$1"

        echoAndLog "${FUNCNAME}(): downloading code..."

        curl "${url}" -o opengnsys.zip && unzip opengnsys.zip && mv "OpenGnsys-$BRANCH" opengnsys
        if [ $? -ne 0 ]; then
                errorAndLog "${FUNCNAME}(): error getting OpenGnsys code from $url"
                return 1
        fi
        rm -f opengnsys.zip
        echoAndLog "${FUNCNAME}(): code was downloaded"
        return 0
}


############################################################
###  Detectar red
############################################################

# Comprobar si existe conexión.
function checkNetworkConnection()
{
        echoAndLog "${FUNCNAME}(): Disabling Firewall: $FIREWALLSERV."
        if [ -n "$FIREWALLSERV" ]; then
                service=$FIREWALLSERV
                $STOPSERVICE; $DISABLESERVICE
        fi

        echoAndLog "${FUNCNAME}(): Checking OpenGnsys server conectivity."
        OPENGNSYS_SERVER=${OPENGNSYS_SERVER:-"opengnsys.es"}
        if which wget &>/dev/null; then
                wget --spider -q $OPENGNSYS_SERVER
        elif which curl &>/dev/null; then
                curl --connect-timeout 10 -s $OPENGNSYS_SERVER -o /dev/null
        else
                echoAndLog "${FUNCNAME}(): Cannot execute \"wget\" nor \"curl\"."
                return 1
        fi
}

# Convierte nº de bits (notación CIDR) en máscara de red (gracias a FriedZombie en openwrt.org).
cidr2mask ()
{
        # Number of args to shift, 255..255, first non-255 byte, zeroes
        set -- $[ 5 - ($1 / 8) ] 255 255 255 255 $[ (255 << (8 - ($1 % 8))) & 255 ] 0 0 0
        [ $1 -gt 1 ] && shift $1 || shift
        echo ${1-0}.${2-0}.${3-0}.${4-0}
}

# Obtener los parámetros de red de la interfaz por defecto.
function getNetworkSettings()
{
        # Arrays globales definidas:
        # - DEVICE:     nombres de dispositivos de red activos.
        # - SERVERIP:   IPs locales del servidor.
        # - NETIP:      IPs de redes.
        # - NETMASK:    máscaras de red.
        # - NETBROAD:   IPs de difusión de redes.
        # - ROUTERIP:   IPs de routers.
        # Otras variables globales:
        # - DEFAULTDEV: dispositivo de red por defecto.
        # - DNSIP:      IP del servidor DNS principal.

        local i=0
        local dev=""

        echoAndLog "${FUNCNAME}(): Detecting network parameters."
        DEVICE=( $(ip -o link show up | awk '!/loopback/ {sub(/:.*/,"",$2); print $2}') )
        if [ -z "$DEVICE" ]; then
                errorAndLog "${FUNCNAME}(): Network devices not detected."
                exit 1
        fi
        for dev in ${DEVICE[*]}; do
                SERVERIP[i]=$(ip -o addr show dev "$dev" | awk '$3~/inet$/ {sub (/\/.*/, ""); print ($4)}')
                if [ -n "${SERVERIP[i]}" ]; then
                        NETMASK[i]=$( cidr2mask $(ip -o addr show dev "$dev" | awk '$3~/inet$/ {sub (/.*\//, "", $4); print ($4)}') )
                        NETBROAD[i]=$(ip -o addr show dev "$dev" | awk '$3~/inet$/ {print ($6)}')
                        NETIP[i]=$(ip route list proto kernel | awk -v d="$dev" '$3==d && /src/ {sub (/\/.*/,""); print $1}')
                        ROUTERIP[i]=$(ip route list default | awk -v d="$dev" '$5==d {print $3}')
                        DEFAULTDEV=${DEFAULTDEV:-"$dev"}
                fi
                let i++
        done
        DNSIP=$(awk '/nameserver/ {print $2}' /etc/resolv.conf | head -n1)
        if [ -z "${NETIP[*]}" -o -z "${NETMASK[*]}" ]; then
                errorAndLog "${FUNCNAME}(): Network not detected."
                exit 1
        fi

        # Variables de ejecución de Apache
        # - APACHE_RUN_USER
        # - APACHE_RUN_GROUP
        if [ -f $APACHECFGDIR/envvars ]; then
                source $APACHECFGDIR/envvars
        fi
        APACHE_RUN_USER=${APACHE_RUN_USER:-"$APACHEUSER"}
        APACHE_RUN_GROUP=${APACHE_RUN_GROUP:-"$APACHEGROUP"}

        echoAndLog "${FUNCNAME}(): Default network device: $DEFAULTDEV."
}


############################################################
### Esqueleto para el Servicio pxe y contenedor tftpboot ###
############################################################

function tftpConfigure()
{
        echoAndLog "${FUNCNAME}(): Configuring TFTP service."
        # Habilitar TFTP y reiniciar Inetd.
        if [ -n "$TFTPSERV" ]; then
                if [ -f $INETDCFGDIR/$TFTPSERV ]; then
                        perl -pi -e 's/disable.*/disable = no/' $INETDCFGDIR/$TFTPSERV
                else
                        service=$TFTPSERV
                        $ENABLESERVICE; $STARTSERVICE
                fi
        fi
        service=$INETDSERV
        $ENABLESERVICE; $STARTSERVICE

        # comprobamos el servicio tftp
        sleep 1
        testPxe
}

# Comprueba que haya conexión al servicio TFTP/PXE.
function testPxe ()
{
        echoAndLog "${FUNCNAME}(): Checking TFTP service... please wait."
        echo "test" >$TFTPCFGDIR/testpxe
        tftp -v 127.0.0.1 -c get testpxe /tmp/testpxe && echoAndLog "TFTP service is OK." || errorAndLog "TFTP service is down."
        rm -f $TFTPCFGDIR/testpxe /tmp/testpxe
}


########################################################################
## Configuración servicio Samba
########################################################################

# Configurar servicios Samba.
function smbConfigure()
{
        echoAndLog "${FUNCNAME}(): Configuring Samba service."

        backupFile $SAMBACFGDIR/smb.conf
        
        # Copiar plantailla de recursos para OpenGnsys
        sed -e "s/OPENGNSYSDIR/${INSTALL_TARGET//\//\\/}/g" \
                $WORKDIR/opengnsys/server/etc/smb-og.conf.tmpl > $SAMBACFGDIR/smb-og.conf
        # Configurar y recargar Samba"
        perl -pi -e "s/WORKGROUP/OPENGNSYS/; s/server string \=.*/server string \= OpenGnsys Samba Server/" $SAMBACFGDIR/smb.conf
        if ! grep -q "smb-og" $SAMBACFGDIR/smb.conf; then
                echo "include = $SAMBACFGDIR/smb-og.conf" >> $SAMBACFGDIR/smb.conf
        fi
        service=$SAMBASERV
        $ENABLESERVICE; $STARTSERVICE
        if [ $? -ne 0 ]; then
                errorAndLog "${FUNCNAME}(): error while configure Samba"
                return 1
        fi
        # Crear clave para usuario de acceso a los recursos.
        echo -ne "$OPENGNSYS_CLIENT_PASSWD\n$OPENGNSYS_CLIENT_PASSWD\n" | smbpasswd -a -s $OPENGNSYS_CLIENT_USER

        echoAndLog "${FUNCNAME}(): Added Samba configuration."
        return 0
}


########################################################################
## Configuración servicio Rsync
########################################################################

# Configurar servicio Rsync.
function rsyncConfigure()
{
        echoAndLog "${FUNCNAME}(): Configuring Rsync service."

        backupFile $RSYNCCFGDIR/rsyncd.conf

        # Configurar acceso a Rsync.
        sed -e "s/CLIENTUSER/$OPENGNSYS_CLIENT_USER/g" \
                $WORKDIR/opengnsys/repoman/etc/rsyncd.conf.tmpl > $RSYNCCFGDIR/rsyncd.conf
        sed -e "s/CLIENTUSER/$OPENGNSYS_CLIENT_USER/g" \
            -e "s/CLIENTPASSWORD/$OPENGNSYS_CLIENT_PASSWD/g" \
                $WORKDIR/opengnsys/repoman/etc/rsyncd.secrets.tmpl > $RSYNCCFGDIR/rsyncd.secrets
        chown root.root $RSYNCCFGDIR/rsyncd.secrets
        chmod 600 $RSYNCCFGDIR/rsyncd.secrets

        # Habilitar Rsync y reiniciar Inetd.
        if [ -n "$RSYNCSERV" ]; then
                if [ -f /etc/default/rsync ]; then
                        perl -pi -e 's/RSYNC_ENABLE=.*/RSYNC_ENABLE=inetd/' /etc/default/rsync
                fi
                if [ -f $INETDCFGDIR/rsync ]; then
                        perl -pi -e 's/disable.*/disable = no/' $INETDCFGDIR/rsync
                else
                        cat << EOT > $INETDCFGDIR/rsync
service rsync
{
        disable = no
        socket_type = stream
        wait = no
        user = root
        server = $(which rsync)
        server_args = --daemon
        log_on_failure += USERID
        flags = IPv6
}
EOT
                fi
                service=$RSYNCSERV $ENABLESERVICE
                service=$INETDSERV $STARTSERVICE
        fi

        echoAndLog "${FUNCNAME}(): Added Rsync configuration."
        return 0
}

        
########################################################################
## Configuración servicio DHCP
########################################################################

# Configurar servicios DHCP.
function dhcpConfigure()
{
        echoAndLog "${FUNCNAME}(): Sample DHCP configuration."

        local errcode=0
        local i=0
        local dev=""

        backupFile $DHCPCFGDIR/dhcpd.conf
        for dev in ${DEVICE[*]}; do
                if [ -n "${SERVERIP[i]}" ]; then
                        backupFile $DHCPCFGDIR/dhcpd-$dev.conf
                        sed -e "s/SERVERIP/${SERVERIP[i]}/g" \
                            -e "s/NETIP/${NETIP[i]}/g" \
                            -e "s/NETMASK/${NETMASK[i]}/g" \
                            -e "s/NETBROAD/${NETBROAD[i]}/g" \
                            -e "s/ROUTERIP/${ROUTERIP[i]}/g" \
                            -e "s/DNSIP/$DNSIP/g" \
                            $WORKDIR/opengnsys/server/etc/dhcpd.conf.tmpl > $DHCPCFGDIR/dhcpd-$dev.conf || errcode=1
                fi
                let i++
        done
        if [ $errcode -ne 0 ]; then
                errorAndLog "${FUNCNAME}(): error while configuring DHCP server"
                return 1
        fi
        ln -f $DHCPCFGDIR/dhcpd-$DEFAULTDEV.conf $DHCPCFGDIR/dhcpd.conf
        service=$DHCPSERV
        $ENABLESERVICE; $STARTSERVICE
        echoAndLog "${FUNCNAME}(): Sample DHCP configured in \"$DHCPCFGDIR\"."
        return 0
}


#####################################################################
####### Funciones específicas de la instalación de Opengnsys
#####################################################################

# Copiar ficheros del OpenGnsys Web Console.
function installWebFiles()
{
        local COMPATDIR f
        local SLIMFILE="slim-2.6.1.zip"
        local SWAGGERFILE="swagger-ui-2.2.5.zip"

        echoAndLog "${FUNCNAME}(): Installing web files..."
        # Copiar ficheros.
        cp -a $WORKDIR/opengnsys/admin/WebConsole/* $INSTALL_TARGET/www   #*/ comentario para Doxygen.
        if [ $? != 0 ]; then
                errorAndLog "${FUNCNAME}(): Error copying web files."
                exit 1
        fi

        # Descomprimir librerías: Slim y Swagger-UI.
        unzip -o $WORKDIR/opengnsys/admin/$SLIMFILE -d $INSTALL_TARGET/www/rest
        unzip -o $WORKDIR/opengnsys/admin/$SWAGGERFILE -d $INSTALL_TARGET/www/rest

        # Compatibilidad con dispositivos móviles.
        COMPATDIR="$INSTALL_TARGET/www/principal"
        for f in acciones administracion aula aulas hardwares imagenes menus repositorios softwares; do
                sed 's/clickcontextualnodo/clicksupnodo/g' $COMPATDIR/$f.php > $COMPATDIR/$f.device.php
        done
        cp -a $COMPATDIR/imagenes.device.php $COMPATDIR/imagenes.device4.php
        # Acceso al manual de usuario
        ln -fs ../doc/userManual $INSTALL_TARGET/www/userManual
        # Ficheros de log de la API REST.
        touch $INSTALL_TARGET/log/{ogagent,remotepc,rest}.log

        echoAndLog "${FUNCNAME}(): Web files installed successfully."
}

# Copiar ficheros en la zona de descargas de OpenGnsys Web Console.
function installDownloadableFiles()
{
        INSTVERSION=1.1.0       ###  Temporal.
        local FILENAME=ogagentpkgs-$INSTVERSION.tar.gz
        local TARGETFILE=$WORKDIR/$FILENAME
 
        # Descargar archivo comprimido, si es necesario.
        if [ -s $PROGRAMDIR/$FILENAME ]; then
                echoAndLog "${FUNCNAME}(): Moving $PROGRAMDIR/$FILENAME file to $(dirname $TARGETFILE)"
                mv $PROGRAMDIR/$FILENAME $TARGETFILE
        else
                echoAndLog "${FUNCNAME}(): Downloading $FILENAME"
                curl $DOWNLOADURL/$FILENAME -o $TARGETFILE
        fi
        if [ ! -s $TARGETFILE ]; then
                errorAndLog "${FUNCNAME}(): Cannot download $FILENAME"
                return 1
        fi
        
        # Descomprimir fichero en zona de descargas.
        tar xvzf $TARGETFILE -C $INSTALL_TARGET/www/descargas
        if [ $? != 0 ]; then
                errorAndLog "${FUNCNAME}(): Error uncompressing archive."
                exit 1
        fi
}

# Configuración específica de Apache.
function installWebConsoleApacheConf()
{
        if [ $# -ne 2 ]; then
                errorAndLog "${FUNCNAME}(): invalid number of parameters"
                exit 1
        fi

        local path_opengnsys_base="$1"
        local path_apache2_confd="$2"
        local CONSOLEDIR=${path_opengnsys_base}/www
        local sockfile

        if [ ! -d $path_apache2_confd ]; then
                errorAndLog "${FUNCNAME}(): path to apache2 conf.d can not found, verify your server installation"
                return 1
        fi

        mkdir -p $path_apache2_confd/{sites-available,sites-enabled}

        echoAndLog "${FUNCNAME}(): creating apache2 config file.."

        # Avtivar PHP-FPM.
        echoAndLog "${FUNCNAME}(): configuring PHP-FPM"
        service=$PHPFPMSERV
        $ENABLESERVICE; $STARTSERVICE
        sockfile=$(find /run/php -name "php*.sock" -type s -print 2>/dev/null)

        # Activar módulos de Apache.
        $APACHEENABLEMODS
        # Activar HTTPS.
        $APACHEENABLESSL
        $APACHEMAKECERT
        # Genera configuración de consola web a partir del fichero plantilla.
        if [ -n "$(apachectl -v | grep "2\.[0-2]")" ]; then
                # Configuración para versiones anteriores de Apache.
                sed -e "s,CONSOLEDIR,$CONSOLEDIR,g" \
                        $WORKDIR/opengnsys/server/etc/apache-prev2.4.conf.tmpl > $path_apache2_confd/$APACHESITESDIR/${APACHEOGSITE}
        else
                # Configuración específica a partir de Apache 2.4
                if [ -n "$sockfile" ]; then
                        sed -e "s,CONSOLEDIR,$CONSOLEDIR,g" \
                            -e "s,proxy:fcgi:.*,proxy:unix:${sockfile%% *}|fcgi://localhost\",g" \
                                $WORKDIR/opengnsys/server/etc/apache.conf.tmpl > $path_apache2_confd/$APACHESITESDIR/${APACHEOGSITE}.conf
                else
                        sed -e "s,CONSOLEDIR,$CONSOLEDIR,g" \
                                $WORKDIR/opengnsys/server/etc/apache.conf.tmpl > $path_apache2_confd/$APACHESITESDIR/${APACHEOGSITE}.conf
                fi
        fi
        $APACHEENABLEOG
        if [ $? -ne 0 ]; then
                errorAndLog "${FUNCNAME}(): config file can't be linked to apache conf, verify your server installation"
                return 1
        fi
        echoAndLog "${FUNCNAME}(): config file created and linked, restarting apache daemon"
        service=$APACHESERV
        $ENABLESERVICE; $STARTSERVICE
        return 0
}


# Crear documentación Doxygen para la consola web.
function makeDoxygenFiles()
{
        echoAndLog "${FUNCNAME}(): Making Doxygen web files..."
        $WORKDIR/opengnsys/installer/ogGenerateDoc.sh \
                        $WORKDIR/opengnsys/client/engine $INSTALL_TARGET/www
        if [ ! -d "$INSTALL_TARGET/www/html" ]; then
                errorAndLog "${FUNCNAME}(): unable to create Doxygen web files."
                return 1
        fi
        mv "$INSTALL_TARGET/www/html" "$INSTALL_TARGET/www/api"
        echoAndLog "${FUNCNAME}(): Doxygen web files created successfully."
}


# Crea la estructura base de la instalación de opengnsys
function createDirs()
{
        if [ $# -ne 1 ]; then
                errorAndLog "${FUNCNAME}(): invalid number of parameters"
                exit 1
        fi

        local path_opengnsys_base="$1"

        # Crear estructura de directorios.
        echoAndLog "${FUNCNAME}(): creating directory paths in $path_opengnsys_base"
        mkdir -p $path_opengnsys_base
        mkdir -p $path_opengnsys_base/bin
        mkdir -p $path_opengnsys_base/client/{cache,images,log}
        mkdir -p $path_opengnsys_base/doc
        mkdir -p $path_opengnsys_base/etc
        mkdir -p $path_opengnsys_base/lib
        mkdir -p $path_opengnsys_base/log/clients
        ln -fs $path_opengnsys_base/log /var/log/opengnsys
        mkdir -p $path_opengnsys_base/sbin
        mkdir -p $path_opengnsys_base/www
        mkdir -p $path_opengnsys_base/images/groups
        mkdir -p $TFTPCFGDIR
        ln -fs $TFTPCFGDIR $path_opengnsys_base/tftpboot
        mkdir -p $path_opengnsys_base/tftpboot/{menu.lst,grub}
        if [ $? -ne 0 ]; then
                errorAndLog "${FUNCNAME}(): error while creating dirs. Do you have write permissions?"
                return 1
        fi

        # Crear usuario ficticio.
        if id -u $OPENGNSYS_CLIENT_USER &>/dev/null; then 
                echoAndLog "${FUNCNAME}(): user \"$OPENGNSYS_CLIENT_USER\" is already created"
        else
                echoAndLog "${FUNCNAME}(): creating OpenGnsys user"
                useradd $OPENGNSYS_CLIENT_USER 2>/dev/null
                if [ $? -ne 0 ]; then
                        errorAndLog "${FUNCNAME}(): error creating OpenGnsys user"
                        return 1
                fi
        fi

        # Mover el fichero de registro de instalación al directorio de logs.
        echoAndLog "${FUNCNAME}(): moving installation log file"
        mv $LOG_FILE $OGLOGFILE && LOG_FILE=$OGLOGFILE
        chmod 600 $LOG_FILE

        echoAndLog "${FUNCNAME}(): directory paths created"
        return 0
}

# Copia ficheros de configuración y ejecutables genéricos del servidor.
function copyServerFiles ()
{
        if [ $# -ne 1 ]; then
                errorAndLog "${FUNCNAME}(): invalid number of parameters"
                exit 1
        fi

        local path_opengnsys_base="$1"

        # Lista de ficheros y directorios origen y de directorios destino.
        local SOURCES=( server/tftpboot \
                        /usr/lib/shim/shimx64.efi.signed \
                        /usr/lib/grub/x86_64-efi-signed/grubnetx64.efi.signed \
                        server/bin \
                        repoman/bin \
                        server/lib \
                        admin/Sources/Services/ogAdmServerAux
                        admin/Sources/Services/ogAdmRepoAux
                        installer/opengnsys_uninstall.sh \
                        installer/opengnsys_update.sh \
                        installer/opengnsys_export.sh \
                        installer/opengnsys_import.sh \
                        doc )
        local TARGETS=( tftpboot \
                        tftpboot \
                        tftpboot/grubx64.efi \
                        bin \
                        bin \
                        lib \
                        sbin \
                        sbin \
                        lib \
                        lib \
                        lib \
                        lib \
                        doc )

        if [ ${#SOURCES[@]} != ${#TARGETS[@]} ]; then
                errorAndLog "${FUNCNAME}(): inconsistent number of array items"
                exit 1
        fi

        # Copiar ficheros.
        echoAndLog "${FUNCNAME}(): copying files to server directories"

        pushd $WORKDIR/opengnsys
        local i
        for (( i = 0; i < ${#SOURCES[@]}; i++ )); do
                if [ -f "${SOURCES[$i]}" ]; then
                        echoAndLog "Copying ${SOURCES[$i]} to $path_opengnsys_base/${TARGETS[$i]}"
                        cp -a "${SOURCES[$i]}" "${path_opengnsys_base}/${TARGETS[$i]}"
                elif [ -d "${SOURCES[$i]}" ]; then
                        echoAndLog "Copying content of ${SOURCES[$i]} to $path_opengnsys_base/${TARGETS[$i]}"
                        cp -a "${SOURCES[$i]}"/* "${path_opengnsys_base}/${TARGETS[$i]}"
                else
                        warningAndLog "Unable to copy ${SOURCES[$i]} to $path_opengnsys_base/${TARGETS[$i]}"
                fi
        done

        popd
}

####################################################################
### Funciones de compilación de código fuente de servicios
####################################################################

# Compilar los servicios de OpenGnsys
function servicesCompilation ()
{
        local hayErrores=0

        # Compilar OpenGnsys Server
        echoAndLog "${FUNCNAME}(): Compiling OpenGnsys Admin Server"
        pushd $WORKDIR/opengnsys/admin/Sources/Services/ogAdmServer
        make && mv ogAdmServer $INSTALL_TARGET/sbin
        if [ $? -ne 0 ]; then
                echoAndLog "${FUNCNAME}(): error while compiling OpenGnsys Admin Server"
                hayErrores=1
        fi
        popd
        # Compilar OpenGnsys Agent
        echoAndLog "${FUNCNAME}(): Compiling OpenGnsys Agent"
        pushd $WORKDIR/opengnsys/admin/Sources/Services/ogAdmAgent
        make && mv ogAdmAgent $INSTALL_TARGET/sbin
        if [ $? -ne 0 ]; then
                echoAndLog "${FUNCNAME}(): error while compiling OpenGnsys Agent"
                hayErrores=1
        fi
        popd    
        # Compilar OpenGnsys Client
        echoAndLog "${FUNCNAME}(): Compiling OpenGnsys Admin Client"
        pushd $WORKDIR/opengnsys/admin/Sources/Clients/ogAdmClient
        make && mv ogAdmClient ../../../../client/shared/bin
        if [ $? -ne 0 ]; then
                echoAndLog "${FUNCNAME}(): error while compiling OpenGnsys Admin Client"
                hayErrores=1
        fi
        popd

        return $hayErrores
}

####################################################################
### Funciones de copia de la Interface de administración
####################################################################

# Copiar carpeta de Interface
function copyInterfaceAdm ()
{
        local hayErrores=0
        
        # Crear carpeta y copiar Interface
        echoAndLog "${FUNCNAME}(): Copying Administration Interface Folder"
        cp -ar $WORKDIR/opengnsys/admin/Interface $INSTALL_TARGET/client/interfaceAdm
        if [ $? -ne 0 ]; then
                echoAndLog "${FUNCNAME}(): error while copying Administration Interface Folder"
                hayErrores=1
        fi
        chown $OPENGNSYS_CLIENT_USER:$OPENGNSYS_CLIENT_USER $INSTALL_TARGET/client/interfaceAdm/CambiarAcceso
        chmod 700 $INSTALL_TARGET/client/interfaceAdm/CambiarAcceso

        return $hayErrores
}

####################################################################
### Funciones instalacion cliente opengnsys
####################################################################

function copyClientFiles()
{
        local errstatus=0

        echoAndLog "${FUNCNAME}(): Copying OpenGnsys Client files."
        cp -a $WORKDIR/opengnsys/client/shared/* $INSTALL_TARGET/client
        if [ $? -ne 0 ]; then
                errorAndLog "${FUNCNAME}(): error while copying client estructure"
                errstatus=1
        fi
        
        echoAndLog "${FUNCNAME}(): Copying OpenGnsys Cloning Engine files."
        mkdir -p $INSTALL_TARGET/client/lib/engine/bin
        cp -a $WORKDIR/opengnsys/client/engine/*.lib* $INSTALL_TARGET/client/lib/engine/bin
        if [ $? -ne 0 ]; then
                errorAndLog "${FUNCNAME}(): error while copying engine files"
                errstatus=1
        fi
        
        if [ $errstatus -eq 0 ]; then
                echoAndLog "${FUNCNAME}(): client copy files success."
        else
                errorAndLog "${FUNCNAME}(): client copy files with errors"
        fi

        return $errstatus
}


# Crear cliente OpenGnsys.
function clientCreate()
{
        if [ $# -ne 1 ]; then
                errorAndLog "${FUNCNAME}(): invalid number of parameters"
                exit 1
        fi

        local FILENAME="$1"
        local TARGETFILE=$INSTALL_TARGET/lib/$FILENAME
 
        # Descargar cliente, si es necesario.
        if [ -s $PROGRAMDIR/$FILENAME ]; then
                echoAndLog "${FUNCNAME}(): Moving $PROGRAMDIR/$FILENAME file to $(dirname $TARGETFILE)"
                mv $PROGRAMDIR/$FILENAME $TARGETFILE
        else
                echoAndLog "${FUNCNAME}(): Downloading $FILENAME"
                oglivecli download $FILENAME
        fi
        if [ ! -s $TARGETFILE ]; then
                errorAndLog "${FUNCNAME}(): Error loading $FILENAME"
                return 1
        fi

        # Montar imagen, copiar cliente ogclient y desmontar.
        echoAndLog "${FUNCNAME}(): Installing ogLive Client"
        echo -ne "$OPENGNSYS_CLIENT_PASSWD\n$OPENGNSYS_CLIENT_PASSWD\n" | \
                        oglivecli install $FILENAME
        # Adaptar permisos.
        chown -R $APACHE_RUN_USER:$APACHE_RUN_GROUP $INSTALL_TARGET/tftpboot/menu.lst

        echoAndLog "${FUNCNAME}(): Client generation success"
}


# Configuración básica de servicios de OpenGnsys
function openGnsysConfigure()
{
        local i=0
        local dev=""
        local CONSOLEURL

        echoAndLog "${FUNCNAME}(): Copying init files."
        cp -a $WORKDIR/opengnsys/admin/Sources/Services/opengnsys.init /etc/init.d/opengnsys
        cp -a $WORKDIR/opengnsys/admin/Sources/Services/opengnsys.default /etc/default/opengnsys
        # Deshabilitar servicios de BitTorrent si no están instalados.
        if [ ! -e /usr/bin/bttrack ]; then
                sed -i 's/RUN_BTTRACKER="yes"/RUN_BTTRACKER="no"/; s/RUN_BTSEEDER="yes"/RUN_BTSEEDER="no"/' \
                        /etc/default/opengnsys
        fi
        echoAndLog "${FUNCNAME}(): Creating cron files."
        echo "* * * * *   root   [ -x $INSTALL_TARGET/bin/opengnsys.cron ] && $INSTALL_TARGET/bin/opengnsys.cron" > /etc/cron.d/opengnsys
        echo "* * * * *   root   [ -x $INSTALL_TARGET/bin/torrent-creator ] && $INSTALL_TARGET/bin/torrent-creator" > /etc/cron.d/torrentcreator
        echo "5 * * * *   root   [ -x $INSTALL_TARGET/bin/torrent-tracker ] && $INSTALL_TARGET/bin/torrent-tracker" > /etc/cron.d/torrenttracker
        echo "* * * * *   root   [ -x $INSTALL_TARGET/bin/deletepreimage ] && $INSTALL_TARGET/bin/deletepreimage" > /etc/cron.d/imagedelete
        echo "* * * * *   root   [ -x $INSTALL_TARGET/bin/ogagentqueue.cron ] && $INSTALL_TARGET/bin/ogagentqueue.cron" > /etc/cron.d/ogagentqueue

        echoAndLog "${FUNCNAME}(): Creating logrotate configuration files."
        sed -e "s/OPENGNSYSDIR/${INSTALL_TARGET//\//\\/}/g" \
                $WORKDIR/opengnsys/server/etc/logrotate.tmpl > /etc/logrotate.d/opengnsysServer

        sed -e "s/OPENGNSYSDIR/${INSTALL_TARGET//\//\\/}/g" \
                $WORKDIR/opengnsys/repoman/etc/logrotate.tmpl > /etc/logrotate.d/opengnsysRepo

        echoAndLog "${FUNCNAME}(): Creating OpenGnsys config files."
        for dev in ${DEVICE[*]}; do
                if [ -n "${SERVERIP[i]}" ]; then
                        sed -e "s/SERVERIP/${SERVERIP[i]}/g" \
                            -e "s/DBUSER/$OPENGNSYS_DB_USER/g" \
                            -e "s/DBPASSWORD/$OPENGNSYS_DB_PASSWD/g" \
                            -e "s/DATABASE/$OPENGNSYS_DATABASE/g" \
                                $WORKDIR/opengnsys/admin/Sources/Services/ogAdmServer/ogAdmServer.cfg > $INSTALL_TARGET/etc/ogAdmServer-$dev.cfg
                        sed -e "s/SERVERIP/${SERVERIP[i]}/g" \
                            -e "s/REPOKEY/$OPENGNSYS_REPOKEY/g" \
                                $WORKDIR/opengnsys/repoman/etc/ogAdmRepo.cfg.tmpl > $INSTALL_TARGET/etc/ogAdmRepo-$dev.cfg
                        sed -e "s/SERVERIP/${SERVERIP[i]}/g" \
                            -e "s/DBUSER/$OPENGNSYS_DB_USER/g" \
                            -e "s/DBPASSWORD/$OPENGNSYS_DB_PASSWD/g" \
                            -e "s/DATABASE/$OPENGNSYS_DATABASE/g" \
                                $WORKDIR/opengnsys/admin/Sources/Services/ogAdmAgent/ogAdmAgent.cfg > $INSTALL_TARGET/etc/ogAdmAgent-$dev.cfg
                        CONSOLEURL="https://${SERVERIP[i]}/opengnsys"
                        sed -e "s/SERVERIP/${SERVERIP[i]}/g" \
                            -e "s/DBUSER/$OPENGNSYS_DB_USER/g" \
                            -e "s/DBPASSWORD/$OPENGNSYS_DB_PASSWD/g" \
                            -e "s/DATABASE/$OPENGNSYS_DATABASE/g" \
                            -e "s/OPENGNSYSURL/${CONSOLEURL//\//\\/}/g" \
                                $INSTALL_TARGET/www/controlacceso.php > $INSTALL_TARGET/www/controlacceso-$dev.php
                        sed -e "s/SERVERIP/${SERVERIP[i]}/g" \
                            -e "s/OPENGNSYSURL/${CONSOLEURL//\//\\/}/g" \
                                $WORKDIR/opengnsys/admin/Sources/Clients/ogAdmClient/ogAdmClient.cfg > $INSTALL_TARGET/client/etc/ogAdmClient-$dev.cfg
                        if [ "$dev" == "$DEFAULTDEV" ]; then
                                OPENGNSYS_CONSOLEURL="$CONSOLEURL"
                        fi
                fi
                let i++
        done
        ln -f $INSTALL_TARGET/etc/ogAdmServer-$DEFAULTDEV.cfg $INSTALL_TARGET/etc/ogAdmServer.cfg
        ln -f $INSTALL_TARGET/etc/ogAdmRepo-$DEFAULTDEV.cfg $INSTALL_TARGET/etc/ogAdmRepo.cfg
        ln -f $INSTALL_TARGET/etc/ogAdmAgent-$DEFAULTDEV.cfg $INSTALL_TARGET/etc/ogAdmAgent.cfg
        ln -f $INSTALL_TARGET/client/etc/ogAdmClient-$DEFAULTDEV.cfg $INSTALL_TARGET/client/etc/ogAdmClient.cfg
        ln -f $INSTALL_TARGET/www/controlacceso-$DEFAULTDEV.php $INSTALL_TARGET/www/controlacceso.php
        chown root:root $INSTALL_TARGET/etc/{ogAdmServer,ogAdmAgent}*.cfg
        chmod 600 $INSTALL_TARGET/etc/{ogAdmServer,ogAdmAgent}*.cfg
        chown $APACHE_RUN_USER:$APACHE_RUN_GROUP $INSTALL_TARGET/www/controlacceso*.php
        chmod 600 $INSTALL_TARGET/www/controlacceso*.php

        # Configuración del motor de clonación.
        # - Zona horaria del servidor.
        TZ=$(timedatectl status|awk -F"[:()]" '/Time.*zone/ {print $2}')
        cat << EOT >> $INSTALL_TARGET/client/etc/engine.cfg
# OpenGnsys Server timezone.
TZ="${TZ// /}"
EOT

        # Revisar permisos generales.
        if [ -x $INSTALL_TARGET/bin/checkperms ]; then
                echoAndLog "${FUNCNAME}(): Checking permissions."
                OPENGNSYS_DIR="$INSTALL_TARGET" OPENGNSYS_USER="$OPENGNSYS_CLIENT_USER" APACHE_USER="$APACHE_RUN_USER" APACHE_GROUP="$APACHE_RUN_GROUP" checkperms
        fi

        # Evitar inicio de duplicado en Ubuntu 14.04 (Upstart y SysV Init).
        if [ -f /etc/init/${MYSQLSERV}.conf -a -n "$(which initctl 2>/dev/null)" ]; then
                service=$MYSQLSERV
                $DISABLESERVICE
        fi

        echoAndLog "${FUNCNAME}(): Starting OpenGnsys services."
        service="opengnsys"
        $ENABLESERVICE; $STARTSERVICE
}


#####################################################################
#######  Función de resumen informativo de la instalación
#####################################################################

function installationSummary()
{
        local VERSIONFILE REVISION

        # Crear fichero de versión y revisión, si no existe.
        VERSIONFILE="$INSTALL_TARGET/doc/VERSION.json"
        [ -f $VERSIONFILE ] || echo '{ "project": "OpenGnsys" }' >$VERSIONFILE
        # Incluir datos de revisión, si se está instalando desde el repositorio
        # de código o si no está incluida en el fichero de versión.
        if [ $REMOTE -eq 1 ] || [ -z "$(jq -r '.release' $VERSIONFILE)" ]; then
                # Revisión: rAñoMesDía.Gitcommit (8 caracteres de fecha y 7 primeros de commit).
                REVISION=$(curl -s "$API_URL" | jq '"r" + (.commit.commit.committer.date | split("-") | join("")[:8]) + "." + (.commit.sha[:7])')
                jq ".release=$REVISION" $VERSIONFILE | sponge $VERSIONFILE
        fi
        VERSION="$(jq -r '[.project, .version, .codename, .release] | join(" ")' $VERSIONFILE 2>/dev/null)"

        # Mostrar información.
        echo
        echoAndLog "OpenGnsys Installation Summary"
        echo       "=============================="
        echoAndLog "Project version:                  $VERSION"
        echoAndLog "Installation directory:           $INSTALL_TARGET"
        echoAndLog "Installation log file:            $LOG_FILE"
        echoAndLog "Repository directory:             $INSTALL_TARGET/images"
        echoAndLog "DHCP configuration directory:     $DHCPCFGDIR"
        echoAndLog "TFTP configuration directory:     $TFTPCFGDIR"
        echoAndLog "Installed ogLive client(s):       $(oglivecli list | awk '{print $2}')"
        echoAndLog "Samba configuration directory:    $SAMBACFGDIR"
        echoAndLog "Web Console URL:                  $OPENGNSYS_CONSOLEURL"
        echoAndLog "Web Console access data:          specified in installer script"
        if grep -q "^RUN_BTTRACK.*no" /etc/default/opengnsys; then
                echoAndLog "BitTorrent service is disabled."
        fi
        echo
        echoAndLog "Post-Installation Instructions:"
        echo       "==============================="
        echoAndLog "Firewall service has been disabled and SELinux mode set to"
        echoAndLog "   permissive during OpenGnsys installation. Please check"
        echoAndLog "   ${FIREWALLSERV:-firewall} and SELinux configuration, if needed."
        echoAndLog "It's strongly recommended to synchronize this server with an NTP server."
        echoAndLog "Review or edit all configuration files."
        echoAndLog "Insert DHCP configuration data and restart service."
        echoAndLog "Optional: Log-in as Web Console admin user."
        echoAndLog " - Review default Organization data and assign access to users."
        echoAndLog "Log-in as Web Console organization user."
        echoAndLog " - Insert OpenGnsys data (labs, computers, menus, etc)."
echo
}



#####################################################################
####### Proceso de instalación de OpenGnsys
#####################################################################

echoAndLog "OpenGnsys installation begins at $(date)"
pushd $WORKDIR

# Detectar datos iniciales de auto-configuración del instalador.
autoConfigure

# Detectar parámetros de red y comprobar si hay conexión.
getNetworkSettings
if [ $? -ne 0 ]; then
        errorAndLog "Error reading default network settings."
        exit 1
fi
checkNetworkConnection
if [ $? -ne 0 ]; then
        errorAndLog "Error connecting to server. Causes:"
        errorAndLog " - Network is unreachable, review devices parameters."
        errorAndLog " - You are inside a private network, configure the proxy service."
        errorAndLog " - Server is temporally down, try agian later."
        exit 1
fi

# Detener servicios de OpenGnsys, si están activos previamente.
[ -f /etc/init.d/opengnsys ] && /etc/init.d/opengnsys stop

# Actualizar repositorios
updatePackageList

# Instalación de dependencias (paquetes de sistema operativo).
declare -a notinstalled
checkDependencies DEPENDENCIES notinstalled
if [ $? -ne 0 ]; then
        installDependencies notinstalled
        if [ $? -ne 0 ]; then
                echoAndLog "Error while installing some dependeces, please verify your server installation before continue"
                exit 1
        fi
fi
if [ -n "$INSTALLEXTRADEPS" ]; then
        echoAndLog "Installing extra dependencies"
        for (( i=0; i<${#INSTALLEXTRADEPS[*]}; i++ )); do
                eval ${INSTALLEXTRADEPS[i]}
        done
fi      

# Detectar datos de auto-configuración después de instalar paquetes.
autoConfigurePost

# Arbol de directorios de OpenGnsys.
createDirs ${INSTALL_TARGET}
if [ $? -ne 0 ]; then
        errorAndLog "Error while creating directory paths!"
        exit 1
fi

# Si es necesario, descarga el repositorio de código en directorio temporal
if [ $REMOTE -eq 1 ]; then
        downloadCode $CODE_URL
        if [ $? -ne 0 ]; then
                errorAndLog "Error while getting code from the repository"
                exit 1
        fi
else
        ln -fs "$(dirname $PROGRAMDIR)" opengnsys
fi

# Compilar código fuente de los servicios de OpenGnsys.
servicesCompilation
if [ $? -ne 0 ]; then
        errorAndLog "Error while compiling OpenGnsys services"
        exit 1
fi

# Copiar carpeta Interface entre administración y motor de clonación.
copyInterfaceAdm
if [ $? -ne 0 ]; then
        errorAndLog "Error while copying Administration Interface"
        exit 1
fi

# Configuración de TFTP.
tftpConfigure

# Configuración de Samba.
smbConfigure
if [ $? -ne 0 ]; then
        errorAndLog "Error while configuring Samba server!"
        exit 1
fi

# Configuración de Rsync.
rsyncConfigure

# Configuración ejemplo DHCP.
dhcpConfigure
if [ $? -ne 0 ]; then
        errorAndLog "Error while copying your dhcp server files!"
        exit 1
fi

# Copiar ficheros de servicios OpenGnsys Server.
copyServerFiles ${INSTALL_TARGET}
if [ $? -ne 0 ]; then
        errorAndLog "Error while copying the server files!"
        exit 1
fi
INSTVERSION=$(jq -r '.version' $INSTALL_TARGET/doc/VERSION.json)

# Instalar base de datos de OpenGnsys Admin.
isInArray notinstalled "mysql-server" || isInArray notinstalled "mariadb-server"
if [ $? -eq 0 ]; then
        # Habilitar gestor de base de datos (MySQL, si falla, MariaDB).
        service=$MYSQLSERV
        $ENABLESERVICE
        if [ $? != 0 ]; then
                service=$MARIADBSERV
                $ENABLESERVICE
        fi
        # Activar gestor de base de datos.
        $STARTSERVICE
        # Asignar clave del usuario "root".
        mysqlSetRootPassword "${MYSQL_ROOT_PASSWORD}"
else
        # Si ya está instalado el gestor de bases de datos, obtener clave de "root", 
        mysqlGetRootPassword
fi

mysqlTestConnection "${MYSQL_ROOT_PASSWORD}"
if [ $? -ne 0 ]; then
        errorAndLog "Error while connection to mysql"
        exit 1
fi
mysqlDbExists ${OPENGNSYS_DATABASE}
if [ $? -ne 0 ]; then
        echoAndLog "Creating Web Console database"
        mysqlCreateDb ${OPENGNSYS_DATABASE}
        if [ $? -ne 0 ]; then
                errorAndLog "Error while creating Web Console database"
                exit 1
        fi
else
        echoAndLog "Web Console database exists, ommiting creation"
fi

mysqlCheckUserExists ${OPENGNSYS_DB_USER}
if [ $? -ne 0 ]; then
        echoAndLog "Creating user in database"
        mysqlCreateAdminUserToDb ${OPENGNSYS_DATABASE} ${OPENGNSYS_DB_USER} "${OPENGNSYS_DB_PASSWD}"
        if [ $? -ne 0 ]; then
                errorAndLog "Error while creating database user"
                exit 1
        fi

fi

mysqlCheckDbIsEmpty ${OPENGNSYS_DATABASE}
if [ $? -eq 0 ]; then
        echoAndLog "Creating tables..."
        if [ -f $WORKDIR/$OPENGNSYS_DB_CREATION_FILE ]; then
                mysqlImportSqlFileToDb ${OPENGNSYS_DATABASE} $WORKDIR/$OPENGNSYS_DB_CREATION_FILE
        else
                errorAndLog "Unable to locate $WORKDIR/$OPENGNSYS_DB_CREATION_FILE!!"
                exit 1
        fi
else
        # Si existe fichero ogBDAdmin-VersLocal-VersRepo.sql; aplicar cambios.
        REPOVERSION=$(jq -r '.version' $WORKDIR/opengnsys/doc/VERSION.json)
        OPENGNSYS_DB_UPDATE_FILE="opengnsys/admin/Database/$OPENGNSYS_DATABASE-$INSTVERSION-$REPOVERSION.sql"
        if [ -f $WORKDIR/$OPENGNSYS_DB_UPDATE_FILE ]; then
                echoAndLog "Updating tables from version $INSTVERSION to $REPOVERSION"
                mysqlImportSqlFileToDb ${OPENGNSYS_DATABASE} $WORKDIR/$OPENGNSYS_DB_UPDATE_FILE
        else
                echoAndLog "Database unchanged."
        fi
fi
# Eliminar fichero temporal con credenciales de acceso a MySQL.
rm -f $TMPMYCNF

# Copiando páqinas web.
installWebFiles
# Descargar/descomprimir archivos descargables.
installDownloadableFiles
# Generar páqinas web de documentación de la API
makeDoxygenFiles

# Creando configuración de Apache.
installWebConsoleApacheConf $INSTALL_TARGET $APACHECFGDIR
if [ $? -ne 0 ]; then
        errorAndLog "Error configuring Apache for OpenGnsys Admin"
        exit 1
fi

popd

# Crear la estructura de los accesos al servidor desde el cliente (shared)
copyClientFiles
if [ $? -ne 0 ]; then
        errorAndLog "Error creating client structure"
fi

# Crear la estructura del cliente de OpenGnsys.
for i in $OGLIVE; do
        if ! clientCreate "$i"; then
                errorAndLog "Error creating client $i"
                exit 1
        fi
done

# Configuración de servicios de OpenGnsys
openGnsysConfigure

# Mostrar sumario de la instalación e instrucciones de post-instalación.
installationSummary

#rm -rf $WORKDIR
echoAndLog "OpenGnsys installation finished at $(date)"
exit 0