Update .gitignore

.gitignore

@@ -3,3 +3,7 @@ image
 *.log
 *.tmp
 ubuntu_chroot
+create_end_squashfs.sh
+ogCore_config.json
+ogGui_config.json
+test.sh

builder.sh

@@ -28,9 +28,15 @@ then
     debootstrap --arch=amd64 --variant=$VARIANT $DIST $CHROOT_DIR $DEBOOT_STRAP_URL
 fi
 
+mkdir -p $CHROOT_DIR/usr/local/share/calamares/branding/
 mkdir -p $CHROOT_DIR/etc/calamares/modules/
 cp calamares/settings.conf $CHROOT_DIR/etc/calamares/
 cp calamares/modules/*.conf $CHROOT_DIR/etc/calamares/modules/
+cp -r calamares/src/branding/opengnsys $CHROOT_DIR/usr/share/calamares/branding/
+chmod 755 $CHROOT_DIR/usr/share/calamares/branding/opengnsys
+chmod 644 $CHROOT_DIR/usr/share/calamares/branding/opengnsys/*
+chmod 755 $CHROOT_DIR/usr/share/calamares/branding/opengnsys/lang
+chmod 644 $CHROOT_DIR/usr/share/calamares/branding/opengnsys/lang/*
 mkdir -p $CHROOT_DIR/usr/share/opengnsys/images
 cp art/* $CHROOT_DIR/usr/share/opengnsys/images/
 mkdir -p $CHROOT_DIR/usr/local/bin

calamares/modules/bootloader/bootloader.conf

@@ -0,0 +1,17 @@
+--- 
+efiBootLoader: "grub"
+kernelSearchPath: "/boot/"
+kernelInstallPath: "/boot/"
+kernelPattern: "^vmlinuz.*"
+loaderEntries:
+  - "timeout 5"
+  - "console-mode keep"
+
+kernelParams: [ "quiet" ]
+
+grubInstall: "grub-install"
+grubMkconfig: "grub-mkconfig"
+grubCfg: "/boot/grub/grub.cfg"
+grubProbe: "grub-probe"
+efiBootMgr: "efibootmgr"
+

calamares/modules/mount/mount.conf

@@ -0,0 +1,19 @@
+---
+extraMounts: 
+  - device: proc
+    fs: proc
+    mountPoint: /proc
+  - device: sys
+    fs: sysfs
+    mountPoint: /sys
+  - device: /dev
+    mountPoint: /dev
+    options: [ bind ] 
+  - device: tmpfs
+    fs: tmpfs
+    mountPoint: /run
+  - device: /run/dev
+    mountPoint: /run/dev
+    options: [ bind ]
+
+

calamares/modules/shellprocess/shell_chroot.conf

@@ -1 +0,0 @@
-../shell_chroot.conf

calamares/modules/shellprocess/shell_chroot.conf

@@ -0,0 +1,11 @@
+--- 
+
+dontChroot: false
+verbose: true
+script: 
+  - /opengnsys-installer/component-installer.sh
+timeout: 600 
+verbose: true   
+
+  
+

calamares/modules/shellprocess/shell_chroot_copy.conf

@@ -0,0 +1,11 @@
+--- 
+
+dontChroot: false
+verbose: true
+script: 
+  - /opengnsys-installer/component-installer.sh
+timeout: 600 
+verbose: true   
+
+  
+

calamares/modules/shellprocess/shell_nonchroot.conf

@@ -1 +0,0 @@
-../shell_nonchroot.conf

calamares/modules/shellprocess/shell_nonchroot.conf

@@ -0,0 +1,9 @@
+--- 
+
+dontChroot: true
+verbose: true
+script: 
+  - mkdir -p ${ROOT}/opengnsys-installer
+  - cp /tmp/opengnsys-installer-configs/* ${ROOT}/opengnsys-installer
+  
+

calamares/modules/shellprocess/shell_nonchroot_copy.conf

@@ -0,0 +1,9 @@
+--- 
+
+dontChroot: true
+verbose: true
+script: 
+  - mkdir -p ${ROOT}/opengnsys-installer
+  - cp /tmp/opengnsys-installer-configs/* ${ROOT}/opengnsys-installer
+  
+

calamares/modules/users/users.conf

@@ -0,0 +1,34 @@
+defaultGroups: 
+    - name: users
+      system: true 
+    - dip:
+      system: true
+    - plugdev:
+      system: true
+    - lxd:
+      system: true
+    - ogadmin:
+
+    
+sudoersGroup: ogadmin
+setRootPassword: true
+doReusePassword: true
+passwordRequirements:
+    minLength: -1  # Password at least this many characters
+    maxLength: -1  # Password at most this many characters
+    libpwquality:
+        - minlen=0
+        - minclass=0
+
+user:
+  shell: /bin/bash
+  forbidden_names: [ root ]
+  home_permissions: "0700"
+
+
+hostname:
+  location: EtcFile
+  writeHostsFile: true
+  template: "ogServer"
+  forbidden_names: [ localhost ]
+

calamares/openGnsys-installer.sh

@@ -1,98 +0,0 @@
-#!/bin/bash
-
-
-CONFIGS_DIR=/tmp/opengnsys-installer-configs
-rm -rf $CONFIGS_DIR
-mkdir -p $CONFIGS_DIR
-
-# Paso 1: Seleccionar los componentes
-components=$(yad --list --title="Seleccionar componentes" \
-  --text="Selecciona los componentes que deseas configurar:" \
-  --checklist --multiple \
-  --column="Seleccionar" --column="Componente" \
-  FALSE "ogCore" \
-  FALSE "ogGui" \
-  FALSE "ogDhcp" \
-  FALSE "ogBoot" \
-  --width=400 --height=300 --center)
-
-# Verificar si el usuario seleccionó algún componente
-if [[ -z "$components" ]]; then
-  yad --info --text="No seleccionaste ningún componente. Saliendo..." --center
-  exit 1
-fi
-
-for component in $components; do
-  selected_component=$(echo "$component" | cut -d '|' -f 2)
-  # Pedir la configuración específica para cada componente seleccionado
-
-
-  # Dividir la configuración en IP y ruta del fichero
-  config_file="config_${selected_component}.json"
-  case $selected_component in
-    "ogCore")
-      config=$(yad --form --title="Configuración para $selected_component" \
-        --field="Usuario administrador":TEXT \
-        --field="Contraseña":HIDE \
-        --width=400 --height=200 --center)
-      user=$(echo "$config" | cut -d '|' -f 1)
-      password=$(echo "$config" | cut -d '|' -f 2)
-      echo "{\"username\": \"$user\", \"password\": \"$password\"}" > $CONFIGS_DIR/"$config_file"
-      ;;
-    "ogGui")
-      config=$(yad --form --title="Configuración para $selected_component" \
-        --field="IP del servidor de ogCore" \
-        --width=400 --height=200 --center)
-      ogcore_ip=$(echo "$config" | cut -d '|' -f 1)
-      echo "{\"ogcore_ip\": \"$ogcore_ip\"}" > $CONFIGS_DIR/"$config_file"
-      ;;
-    "ogDhcp")
-      config=$(yad --form --title="Configuración para $selected_component" \
-        --field="Configuración IP servidor de Boot" \
-        --field="Interfaces Boot" \
-        --width=400 --height=200 --center)
-      ogbootIP=$(echo "$config" | cut -d '|' -f 1)
-      interfaces=$(echo "$config" | cut -d '|' -f 2)
-      json_array_interfaces=$(echo "$interfaces" | jq -R 'split(",")')
-      echo "{\"ogbootIP\": \"$ogbootIP\", \"interfaces\": \"$json_array_interfaces\"}" > $CONFIGS_DIR/"$config_file" 
-      ;;
-    "ogBoot")
-      config=$(yad --form --title="Configuración para $selected_component" \
-        --field="ogCore Ip Server" \
-        --field="ogCore Server" \
-        --field="ogCore Dir" \
-        --field="ogBoot GitRepo" \
-        --field="ogBoot Samba User" \
-        --field="ogBoot Samba Pass" \
-        --width=400 --height=200 --center)
-      ogcore_ip=$(echo "$config" | cut -d '|' -f 1)
-      ogcore_server=$(echo "$config" | cut -d '|' -f 2)
-      ogcore_dir=$(echo "$config" | cut -d '|' -f 3)
-      ogboot_gitrepo=$(echo "$config" | cut -d '|' -f 4)
-      ogboot_samba_user=$(echo "$config" | cut -d '|' -f 5)
-      ogboot_samba_pass=$(echo "$config" | cut -d '|' -f 6)
-      echo "{\"ogcore_ip\": \"$ogcore_ip\", \"ogcore_server\": \"$ogcore_server\", \"ogcore_dir\": \"$ogcore_dir\", \"ogboot_gitrepo\": \"$ogboot_gitrepo\", \"ogboot_samba_user\": \"$ogboot_samba_user\", \"ogboot_samba_pass\": \"$ogboot_samba_pass\"}" > $CONFIGS_DIR/"$config_file"
-      ;;
-  esac
-
-  # Verificar si los campos no están vacíos
-  # if [[ -z "$server_ip" || -z "$config_path" ]]; then
-  #   yad --error --text="Debes proporcionar la IP del servidor y la ruta del fichero para $selected_component." --center
-  #   exit 1
-  # fi
-
-  # Guardar la configuración en un archivo (cada componente tiene su archivo JSON)
-  config_file="./${selected_component}_config.json"
-  echo "{\"server_ip\": \"$server_ip\", \"config_path\": \"$config_path\"}" > "$config_file"
-
-  # Mostrar un mensaje de éxito
-  yad --info --text="Configuración guardada en $config_file para $selected_component." --center
-
-done
-
-
-# # Una vez se ha configurado todo, se puede proceder a la instalación de los componentes
-# # Ejecutar la instalación con calamares y enviar el log a un archivo
-
-# #calamares > installer.log 2>&1 & disown
-sudo calamares > installer.log 2>&1

calamares/settings.conf

@@ -41,7 +41,7 @@ sequence:
     - finished 
 
 
-branding: default 
+branding: opengnsys 
 prompt-install: false
 dont-chroot: false
 oem-setup: false

calamares/src/branding/opengnsys/banner.png.license

@@ -0,0 +1,2 @@
+SPDX-FileCopyrightText: 2020 Adriaan de Groot <groot@kde.org>
+SPDX-License-Identifier: GPL-3.0-or-later

calamares/src/branding/opengnsys/branding.desc

@@ -0,0 +1,239 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Product branding information. This influences some global
+# user-visible aspects of Calamares, such as the product
+# name, window behavior, and the slideshow during installation.
+#
+# Additional styling can be done using the stylesheet.qss
+# file, also in the branding directory.
+---
+componentName:  opengnsys
+
+
+### WELCOME / OVERALL WORDING
+#
+# These settings affect some overall phrasing and looks,
+# which are most visible in the welcome page.
+
+# This selects between different welcome texts. When false, uses
+# the traditional "Welcome to the %1 installer.", and when true,
+# uses "Welcome to the Calamares installer for %1." This allows
+# to distinguish this installer from other installers for the
+# same distribution.
+welcomeStyleCalamares:   false
+
+# Should the welcome image (productWelcome, below) be scaled
+# up beyond its natural size? If false, the image does not grow
+# with the window but remains the same size throughout (this
+# may have surprising effects on HiDPI monitors).
+welcomeExpandingLogo:   true
+
+### WINDOW CONFIGURATION
+#
+# The settings here affect the placement of the Calamares
+# window through hints to the window manager and initial
+# sizing of the Calamares window.
+
+# Size and expansion policy for Calamares.
+#  - "normal" or unset, expand as needed, use *windowSize*
+#  - "fullscreen", start as large as possible, ignore *windowSize*
+#  - "noexpand", don't expand automatically, use *windowSize*
+windowExpanding:    normal
+
+# Size of Calamares window, expressed as w,h. Both w and h
+# may be either pixels (suffix px) or font-units (suffix em).
+#   e.g.    "800px,600px"
+#           "60em,480px"
+# This setting is ignored if "fullscreen" is selected for
+# *windowExpanding*, above. If not set, use constants defined
+# in CalamaresUtilsGui, 800x520.
+windowSize: 800px,520px
+
+# Placement of Calamares window. Either "center" or "free".
+# Whether "center" actually works does depend on the window
+# manager in use (and only makes sense if you're not using
+# *windowExpanding* set to "fullscreen").
+windowPlacement: center
+
+### PANELS CONFIGURATION
+#
+# Calamares has a main content area, and two panels (navigation
+# and progress / sidebar). The panels can be controlled individually,
+# or switched off. If both panels are switched off, the layout of
+# the main content area loses its margins, on the assumption that
+# you're doing something special.
+
+# Kind of sidebar (panel on the left, showing progress).
+#  - "widget" or unset, use traditional sidebar (logo, items)
+#  - "none", hide it entirely
+#  - "qml", use calamares-sidebar.qml from branding folder
+# In addition, you **may** specify a side, separated by a comma,
+# from the kind. Valid sides are:
+#  - "left" (if not specified, uses this)
+#  - "right"
+#  - "top"
+#  - "bottom"
+# For instance, "widget,right" is valid; so is "qml", which defaults
+# to putting the sidebar on the left. Also valid is "qml,top".
+# While "widget,top" is valid, the widgets code is **not** flexible
+# and results will be terrible.
+sidebar: widget
+
+# Kind of navigation (button panel on the bottom).
+#  - "widget" or unset, use traditional navigation
+#  - "none", hide it entirely
+#  - "qml", use calamares-navigation.qml from branding folder
+# In addition, you **may** specify a side, separated by a comma,
+# from the kind. The same sides are valid as for *sidebar*,
+# except the default is *bottom*.
+navigation: widget
+
+
+### STRINGS, IMAGES AND COLORS
+#
+# This section contains the "branding proper" of names
+# and images, rather than global-look settings.
+
+# These are strings shown to the user in the user interface.
+# There is no provision for translating them -- since they
+# are names, the string is included as-is.
+#
+# The four Url strings are the Urls used by the buttons in
+# the welcome screen, and are not shown to the user. Clicking
+# on the "Support" button, for instance, opens the link supportUrl.
+# If a Url is empty, the corresponding button is not shown.
+#
+# bootloaderEntryName is how this installation / distro is named
+# in the boot loader (e.g. in the GRUB menu).
+#
+# These strings support substitution from /etc/os-release
+# if KDE Frameworks 5.58 are available at build-time. When
+# enabled, ${varname} is replaced by the equivalent value
+# from os-release. All the supported var-names are in all-caps,
+# and are listed on the FreeDesktop.org site,
+#       https://www.freedesktop.org/software/systemd/man/os-release.html
+# Note that ANSI_COLOR and CPE_NAME don't make sense here, and
+# are not supported (the rest are). Remember to quote the string
+# if it contains substitutions, or you'll get YAML exceptions.
+#
+# The *Url* entries are used on the welcome page, and they
+# are visible as buttons there if the corresponding *show* keys
+# are set to "true" (they can also be overridden).
+strings:
+    productName:         "${NAME}"
+    shortProductName:    Generic
+    version:             2023.3 LTS
+    shortVersion:        2023.3
+    versionedName:       Fancy GNU/Linux 2023.3 LTS "Venomous Vole"
+    shortVersionedName:  FancyGL 2023.3
+    bootloaderEntryName: FancyGL
+    productUrl:          https://calamares.io/
+    supportUrl:          https://github.com/calamares/calamares/wiki
+    knownIssuesUrl:      https://github.com/calamares/calamares/issues
+    releaseNotesUrl:     https://calamares.io/news/
+    donateUrl:           https://kde.org/community/donations/index.php
+
+# These images are loaded from the branding module directory.
+#
+# productBanner is an optional image, which if present, will be shown
+#       on the welcome page of the application, above the welcome text.
+#       It is intended to have a width much greater than height.
+#       It is displayed at 64px height (also on HiDPI).
+#       Recommended size is 64px tall, and up to 460px wide.
+# productIcon is used as the window icon, and will (usually) be used
+#       by the window manager to represent the application. This image
+#       should be square, and may be displayed by the window manager
+#       as small as 16x16 (but possibly larger).
+# productLogo is used as the logo at the top of the left-hand column
+#       which shows the steps to be taken. The image should be square,
+#       and is displayed at 80x80 pixels (also on HiDPI).
+# productWallpaper is an optional image, which if present, will replace
+#       the normal solid background on every page of the application.
+#       It can be any size and proportion,
+#       and will be tiled to fit the entire window.
+#       For a non-tiled wallpaper, the size should be the same as
+#       the overall window, see *windowSize* above (800x520).
+# productWelcome is shown on the welcome page of the application in
+#       the middle of the window, below the welcome text. It can be
+#       any size and proportion, and will be scaled to fit inside
+#       the window. Use `welcomeExpandingLogo` to make it non-scaled.
+#       Recommended size is 320x150.
+#
+# These filenames can also use substitutions from os-release (see above).
+images:
+    # productBanner:       "banner.png"
+    productIcon:         "squid.png"
+    productLogo:         "squid.png"
+    # productWallpaper:    "wallpaper.png"
+    productWelcome:      "languages.png"
+
+# Colors for text and background components.
+#
+#  - SidebarBackground is the background of the sidebar
+#  - SidebarText is the (foreground) text color
+#  - SidebarBackgroundCurrent sets the background of the current step.
+#    Optional, and defaults to the application palette.
+#  - SidebarTextCurrent is the text color of the current step.
+#
+# These colors can **also** be set through the stylesheet, if the
+# branding component also ships a stylesheet.qss. Then they are
+# the corresponding CSS attributes of #sidebarApp.
+style:
+   SidebarBackground:        "#292F34"
+   SidebarText:              "#FFFFFF"
+   SidebarTextCurrent:       "#292F34"
+   SidebarBackgroundCurrent: "#D35400"
+
+### SLIDESHOW
+#
+# The slideshow is displayed during execution steps (e.g. when the
+# installer is actually writing to disk and doing other slow things).
+
+# The slideshow can be a QML file (recommended) which can display
+# arbitrary things -- text, images, animations, or even play a game --
+# during the execution step. The QML **is** abruptly stopped when the
+# execution step is done, though, so maybe a game isn't a great idea.
+#
+# The slideshow can also be a sequence of images (not recommended unless
+# you don't want QML at all in your Calamares). The images are displayed
+# at a rate of 1 every 2 seconds during the execution step.
+#
+# To configure a QML file, list a single filename:
+#   slideshow:               "show.qml"
+# To configure images, like the filenames (here, as an inline list):
+#   slideshow: [ "/etc/calamares/slideshow/0.png", "/etc/logo.png" ]
+slideshow:               "show.qml"
+
+# There are two available APIs for a QML slideshow:
+#  - 1 (the default) loads the entire slideshow when the installation-
+#      slideshow page is shown and starts the QML then. The QML
+#      is never stopped (after installation is done, times etc.
+#      continue to fire).
+#  - 2 loads the slideshow on startup and calls onActivate() and
+#      onLeave() in the root object. After the installation is done,
+#      the show is stopped (first by calling onLeave(), then destroying
+#      the QML components).
+#
+# An image slideshow does not need to have the API defined.
+slideshowAPI: 2
+
+
+# These options are to customize online uploading of logs to pastebins:
+#  - type      : Defines the kind of pastebin service to be used. Currently
+#                it accepts two values:
+#                - none    :    disables the pastebin functionality
+#                - fiche   :    use fiche pastebin server
+#  - url       : Defines the address of pastebin service to be used.
+#                Takes string as input. Important bits are the host and port,
+#                the scheme is not used.
+#  - sizeLimit : Defines maximum size limit (in KiB) of log file to be pasted.
+#                The option must be set, to have the log option work.
+#                Takes integer as input. If < 0, no limit will be forced,
+#                else only last (approximately) 'n' KiB of log file will be pasted.
+#                Please note that upload size may be slightly over the limit (due
+#                to last minute logging), so provide a suitable value.
+uploadServer :
+    type :    "fiche"
+    url :     "http://termbin.com:9999"
+    sizeLimit : -1

calamares/src/branding/opengnsys/languages.png.license

@@ -0,0 +1,2 @@
+SPDX-FileCopyrightText: 2015 Teo Mrnjavac <teo@kde.org>
+SPDX-License-Identifier: GPL-3.0-or-later

calamares/src/branding/opengnsys/show.qml

@@ -0,0 +1,73 @@
+/* === This file is part of Calamares - <https://calamares.io> ===
+ *
+ *   SPDX-FileCopyrightText: 2015 Teo Mrnjavac <teo@kde.org>
+ *   SPDX-FileCopyrightText: 2018 Adriaan de Groot <groot@kde.org>
+ *   SPDX-License-Identifier: GPL-3.0-or-later
+ *
+ *   Calamares is Free Software: see the License-Identifier above.
+ *
+ */
+
+import QtQuick 2.0;
+import calamares.slideshow 1.0;
+
+Presentation
+{
+    id: presentation
+
+    function nextSlide() {
+        console.log("QML Component (default slideshow) Next slide");
+        presentation.goToNextSlide();
+    }
+
+    Timer {
+        id: advanceTimer
+        interval: 1000
+        running: presentation.activatedInCalamares
+        repeat: true
+        onTriggered: nextSlide()
+    }
+
+    Slide {
+
+        Image {
+            id: background
+            source: "Opengnsys-wallpaper.jpg"
+            width: 200; height: 200
+            fillMode: Image.PreserveAspectFit
+            anchors.centerIn: parent
+        }
+        Text {
+            anchors.horizontalCenter: background.horizontalCenter
+            anchors.top: background.bottom
+            text: "This is a customizable QML slideshow for Opengnsys project.<br/>"
+            wrapMode: Text.WordWrap
+            width: presentation.width
+            horizontalAlignment: Text.Center
+        }
+    }
+
+    Slide {
+        centeredText: qsTr("Opengnsys is and incredible project.")
+    }
+
+    Slide {
+        centeredText: qsTr("Look at the marvelous of Opengnsys Project.")
+    }
+
+    // When this slideshow is loaded as a V1 slideshow, only
+    // activatedInCalamares is set, which starts the timer (see above).
+    //
+    // In V2, also the onActivate() and onLeave() methods are called.
+    // These example functions log a message (and re-start the slides
+    // from the first).
+    function onActivate() {
+        console.log("QML Component (default slideshow) activated");
+        presentation.currentSlide = 0;
+    }
+
+    function onLeave() {
+        console.log("QML Component (default slideshow) deactivated");
+    }
+
+}

calamares/src/branding/opengnsys/squid.png.license

@@ -0,0 +1,2 @@
+SPDX-FileCopyrightText: 2014 Teo Mrnjavac <teo@kde.org>
+SPDX-License-Identifier: GPL-3.0-or-later

calamares/src/branding/opengnsys/stylesheet.qss

@@ -0,0 +1,96 @@
+/*
+ * SPDX-FileCopyrightText: no
+ * SPDX-License-Identifier: CC0-1.0
+ */
+
+/*
+A branding component can ship a stylesheet (like this one)
+which is applied to parts of the Calamares user-interface.
+In principle, all parts can be styled through CSS.
+Missing parts should be filed as issues.
+
+The IDs are based on the object names in the C++ code.
+You can use the Debug Dialog to find out object names:
+  - Open the debug dialog
+  - Choose tab *Tools*
+  - Click *Widget Tree* button
+The list of object names is printed in the log.
+
+Documentation for styling Qt Widgets through a stylesheet
+can be found at
+    https://doc.qt.io/qt-5/stylesheet-examples.html
+    https://doc.qt.io/qt-5/stylesheet-reference.html
+In Calamares, styling widget classes is supported (e.g.
+using `QComboBox` as a selector).
+
+This example stylesheet has all the actual styling commented out.
+The examples are not exhaustive.
+
+*/
+
+/*** Generic Widgets.
+ *
+ * You can style **all** widgets of a given class by selecting
+ * the class name. Some widgets have specialized sub-selectors.
+ */
+
+/*
+QPushButton { background-color: green; }
+*/
+
+/*** Main application window.
+ *
+ * The main application window has the sidebar, which in turn
+ * contains a logo and a list of items -- note that the list
+ * can **not** be styled, since it has its own custom C++
+ * delegate code.
+ */
+
+/*
+#mainApp { }
+#sidebarApp { }
+#logoApp { }
+*/
+
+/*** Welcome module.
+ *
+ * There are plenty of parts, but the buttons are the most interesting
+ * ones (donate, release notes, ...). The little icon image can be
+ * styled through *qproperty-icon*, which is a little obscure.
+ * URLs can reference the QRC paths of the Calamares application
+ * or loaded via plugins or within the filesystem. There is no
+ * comprehensive list of available icons, though.
+ */
+
+/*
+QPushButton#aboutButton { qproperty-icon: url(:/data/images/release.svg); }
+#donateButton,
+#supportButton,
+#releaseNotesButton,
+#knownIssuesButton { qproperty-icon: url(:/data/images/help.svg); }
+*/
+
+/*** Partitioning module.
+ *
+ * Many moving parts, which you will need to experiment with.
+ */
+
+/*
+#bootInfoIcon { }
+#bootInfoLable { }
+#deviceInfoIcon { }
+#defineInfoLabel { }
+#scrollAreaWidgetContents { }
+#partitionBarView { }
+*/
+
+/*** Licensing module.
+ *
+ * The licensing module paints individual widgets for each of
+ * the licenses. The item can be collapsed or expanded.
+ */
+
+/*
+#licenseItem {  }
+#licenseItemFullText {  }
+*/

chroot_setup.sh

@@ -218,7 +218,7 @@ set_pkg_configuration
 install_mesa_repo
 install_non_interactive 
 install_packages sudo ubuntu-standard sudo casper dbus-bin mesa-utils  mesa-vulkan-drivers discover  isc-dhcp-client  laptop-detect   unzip  os-prober    network-manager    net-tools    wireless-tools    wpagui    locales    grub-common    grub-gfxpayload-lists    grub-pc    grub-pc-bin    grub2-common    grub-efi-amd64-signed    shim-signed    mtools    binutils  virtualbox-guest-utils virtualbox-guest-x11  python3-xdg
-install_non_interactive sddm openbox plymouth calamares terminator pcmanfm yad 
+install_non_interactive sddm openbox plymouth calamares terminator pcmanfm yad qml-modules* 
 install_no_recommends linux-image-generic auditd 
 set_root_passwd
 configure_divert

component-installer.sh

@@ -22,6 +22,7 @@ function install_ogcore_docker() {
     # Leer el JSON y extraer los valores con jq
     user=$(jq -r '.username' /opt/opengnsys/ogCore/installer/config.json)
     password=$(jq -r '.password' /opt/opengnsys/ogCore/installer/config.json)
+    ogcore_version=$(jq -r '.container_version' /opt/opengnsys/ogCore/installer/config.json)
 
     # Exportar los valores como variables de entorno
     export USER_NAME="$user"

openGnsys-installer.sh

@@ -33,18 +33,23 @@ for component in $components; do
     "ogCore")
       config=$(yad --form --title="Configuración para $selected_component" \
         --field="Usuario administrador":TEXT \
-        --field="Contraseña":HIDE \
+        --field="Contraseña":H \
+        --field="Tag del contenedor":TEXT \
+        "ogadmin" ""  "main" \
         --width=400 --height=200 --center)
       user=$(echo "$config" | cut -d '|' -f 1)
       password=$(echo "$config" | cut -d '|' -f 2)
-      echo "{\"username\": \"$user\", \"password\": \"$password\"}" > $CONFIGS_DIR/"$config_file"
+      container_tag=$(echo "$config" | cut -d '|' -f 3)
+      echo "{\"username\": \"$user\", \"password\": \"$password\", \"container_version\": \"$container_tag\" }" > $CONFIGS_DIR/"$config_file"
       ;;
     "ogGui")
       config=$(yad --form --title="Configuración para $selected_component" \
         --field="IP del servidor de ogCore" \
+        --field="Tag del contenedor":TEXT \
         --width=400 --height=200 --center)
       ogcore_ip=$(echo "$config" | cut -d '|' -f 1)
-      echo "{\"ogcore_ip\": \"$ogcore_ip\"}" > $CONFIGS_DIR/"$config_file"
+      container_version=$(echo "$config" | cut -d '|' -f 2)
+      echo "{\"ogcore_ip\": \"$ogcore_ip\" , \"container_version\": \"$container_version\" }" > $CONFIGS_DIR/"$config_file"
       ;;
     "ogDhcp")
       config=$(yad --form --title="Configuración para $selected_component" \