diff --git a/Makefile.in b/Makefile.in
index 5551e978..c5242514 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -72,15 +72,9 @@ AWK = @AWK@
 CC = @CC@
 CFLAGS = @CFLAGS@
 CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 ECHO = @ECHO@
-GLIB_CFLAGS = @GLIB_CFLAGS@
-GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
-GLIB_LIBS = @GLIB_LIBS@
-GLIB_MKENUMS = @GLIB_MKENUMS@
-GOBJECT_QUERY = @GOBJECT_QUERY@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 LDFLAGS = @LDFLAGS@
 LIBNTFS_GNOMEVFS_CFLAGS = @LIBNTFS_GNOMEVFS_CFLAGS@
diff --git a/TODO.libntfs b/TODO.libntfs
index 5029567b..2f775696 100644
--- a/TODO.libntfs
+++ b/TODO.libntfs
@@ -2,7 +2,7 @@
 * libntfs-gnomevfs *
 ********************
 
-Be generic GnomeVFS filter; how to redirect ntfs_mount(3) to GnomeVFS parent?
+- be generic filter: provide ntfs_device_operations from parent GnomeVFSHandle
 
 ***********
 * libntfs *
diff --git a/aclocal.m4 b/aclocal.m4
index 63b1bcbd..39c9c30e 100644
--- a/aclocal.m4
+++ b/aclocal.m4
@@ -4512,219 +4512,6 @@ fi
 AC_MSG_RESULT([$SED])
 ])
 
-# Configure paths for GLIB
-# Owen Taylor     1997-2001
-
-dnl AM_PATH_GLIB_2_0([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
-dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if gmodule, gobject or 
-dnl gthread is specified in MODULES, pass to pkg-config
-dnl
-AC_DEFUN(AM_PATH_GLIB_2_0,
-[dnl 
-dnl Get the cflags and libraries from pkg-config
-dnl
-AC_ARG_ENABLE(glibtest, [  --disable-glibtest      do not try to compile and run a test GLIB program],
-		    , enable_glibtest=yes)
-
-  pkg_config_args=glib-2.0
-  for module in . $4
-  do
-      case "$module" in
-         gmodule) 
-             pkg_config_args="$pkg_config_args gmodule-2.0"
-         ;;
-         gobject) 
-             pkg_config_args="$pkg_config_args gobject-2.0"
-         ;;
-         gthread) 
-             pkg_config_args="$pkg_config_args gthread-2.0"
-         ;;
-      esac
-  done
-
-  AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
-
-  no_glib=""
-
-  if test x$PKG_CONFIG != xno ; then
-    if $PKG_CONFIG --atleast-pkgconfig-version 0.7 ; then
-      :
-    else
-      echo *** pkg-config too old; version 0.7 or better required.
-      no_glib=yes
-      PKG_CONFIG=no
-    fi
-  else
-    no_glib=yes
-  fi
-
-  min_glib_version=ifelse([$1], ,2.0.0,$1)
-  AC_MSG_CHECKING(for GLIB - version >= $min_glib_version)
-
-  if test x$PKG_CONFIG != xno ; then
-    ## don't try to run the test against uninstalled libtool libs
-    if $PKG_CONFIG --uninstalled $pkg_config_args; then
-	  echo "Will use uninstalled version of GLib found in PKG_CONFIG_PATH"
-	  enable_glibtest=no
-    fi
-
-    if $PKG_CONFIG --atleast-version $min_glib_version $pkg_config_args; then
-	  :
-    else
-	  no_glib=yes
-    fi
-  fi
-
-  if test x"$no_glib" = x ; then
-    GLIB_GENMARSHAL=`$PKG_CONFIG --variable=glib_genmarshal glib-2.0`
-    GOBJECT_QUERY=`$PKG_CONFIG --variable=gobject_query glib-2.0`
-    GLIB_MKENUMS=`$PKG_CONFIG --variable=glib_mkenums glib-2.0`
-
-    GLIB_CFLAGS=`$PKG_CONFIG --cflags $pkg_config_args`
-    GLIB_LIBS=`$PKG_CONFIG --libs $pkg_config_args`
-    glib_config_major_version=`$PKG_CONFIG --modversion glib-2.0 | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
-    glib_config_minor_version=`$PKG_CONFIG --modversion glib-2.0 | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
-    glib_config_micro_version=`$PKG_CONFIG --modversion glib-2.0 | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
-    if test "x$enable_glibtest" = "xyes" ; then
-      ac_save_CFLAGS="$CFLAGS"
-      ac_save_LIBS="$LIBS"
-      CFLAGS="$CFLAGS $GLIB_CFLAGS"
-      LIBS="$GLIB_LIBS $LIBS"
-dnl
-dnl Now check if the installed GLIB is sufficiently new. (Also sanity
-dnl checks the results of pkg-config to some extent)
-dnl
-      rm -f conf.glibtest
-      AC_TRY_RUN([
-#include <glib.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-int 
-main ()
-{
-  int major, minor, micro;
-  char *tmp_version;
-
-  system ("touch conf.glibtest");
-
-  /* HP/UX 9 (%@#!) writes to sscanf strings */
-  tmp_version = g_strdup("$min_glib_version");
-  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
-     printf("%s, bad version string\n", "$min_glib_version");
-     exit(1);
-   }
-
-  if ((glib_major_version != $glib_config_major_version) ||
-      (glib_minor_version != $glib_config_minor_version) ||
-      (glib_micro_version != $glib_config_micro_version))
-    {
-      printf("\n*** 'pkg-config --modversion glib-2.0' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", 
-             $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version,
-             glib_major_version, glib_minor_version, glib_micro_version);
-      printf ("*** was found! If pkg-config was correct, then it is best\n");
-      printf ("*** to remove the old version of GLib. You may also be able to fix the error\n");
-      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
-      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
-      printf("*** required on your system.\n");
-      printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n");
-      printf("*** to point to the correct configuration files\n");
-    } 
-  else if ((glib_major_version != GLIB_MAJOR_VERSION) ||
-	   (glib_minor_version != GLIB_MINOR_VERSION) ||
-           (glib_micro_version != GLIB_MICRO_VERSION))
-    {
-      printf("*** GLIB header files (version %d.%d.%d) do not match\n",
-	     GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION);
-      printf("*** library (version %d.%d.%d)\n",
-	     glib_major_version, glib_minor_version, glib_micro_version);
-    }
-  else
-    {
-      if ((glib_major_version > major) ||
-        ((glib_major_version == major) && (glib_minor_version > minor)) ||
-        ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro)))
-      {
-        return 0;
-       }
-     else
-      {
-        printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n",
-               glib_major_version, glib_minor_version, glib_micro_version);
-        printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n",
-	       major, minor, micro);
-        printf("*** GLIB is always available from ftp://ftp.gtk.org.\n");
-        printf("***\n");
-        printf("*** If you have already installed a sufficiently new version, this error\n");
-        printf("*** probably means that the wrong copy of the pkg-config shell script is\n");
-        printf("*** being found. The easiest way to fix this is to remove the old version\n");
-        printf("*** of GLIB, but you can also set the PKG_CONFIG environment to point to the\n");
-        printf("*** correct copy of pkg-config. (In this case, you will have to\n");
-        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
-        printf("*** so that the correct libraries are found at run-time))\n");
-      }
-    }
-  return 1;
-}
-],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
-       CFLAGS="$ac_save_CFLAGS"
-       LIBS="$ac_save_LIBS"
-     fi
-  fi
-  if test "x$no_glib" = x ; then
-     AC_MSG_RESULT(yes (version $glib_config_major_version.$glib_config_minor_version.$glib_config_micro_version))
-     ifelse([$2], , :, [$2])     
-  else
-     AC_MSG_RESULT(no)
-     if test "$PKG_CONFIG" = "no" ; then
-       echo "*** A new enough version of pkg-config was not found."
-       echo "*** See http://www.freedesktop.org/software/pkgconfig/"
-     else
-       if test -f conf.glibtest ; then
-        :
-       else
-          echo "*** Could not run GLIB test program, checking why..."
-          ac_save_CFLAGS="$CFLAGS"
-          ac_save_LIBS="$LIBS"
-          CFLAGS="$CFLAGS $GLIB_CFLAGS"
-          LIBS="$LIBS $GLIB_LIBS"
-          AC_TRY_LINK([
-#include <glib.h>
-#include <stdio.h>
-],      [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ],
-        [ echo "*** The test program compiled, but did not run. This usually means"
-          echo "*** that the run-time linker is not finding GLIB or finding the wrong"
-          echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your"
-          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
-          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
-          echo "*** is required on your system"
-	  echo "***"
-          echo "*** If you have an old version installed, it is best to remove it, although"
-          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ],
-        [ echo "*** The test program failed to compile or link. See the file config.log for the"
-          echo "*** exact error that occured. This usually means GLIB is incorrectly installed."])
-          CFLAGS="$ac_save_CFLAGS"
-          LIBS="$ac_save_LIBS"
-       fi
-     fi
-     GLIB_CFLAGS=""
-     GLIB_LIBS=""
-     GLIB_GENMARSHAL=""
-     GOBJECT_QUERY=""
-     GLIB_MKENUMS=""
-     ifelse([$3], , :, [$3])
-  fi
-  AC_SUBST(GLIB_CFLAGS)
-  AC_SUBST(GLIB_LIBS)
-  AC_SUBST(GLIB_GENMARSHAL)
-  AC_SUBST(GOBJECT_QUERY)
-  AC_SUBST(GLIB_MKENUMS)
-  rm -f conf.glibtest
-])
-
 
 dnl PKG_CHECK_MODULES(GSTUFF, gtk+-2.0 >= 1.3 glib = 1.3.4, action-if, action-not)
 dnl defines GSTUFF_LIBS, GSTUFF_CFLAGS, see pkg-config man page
diff --git a/configure b/configure
index f564c62e..d95f8317 100755
--- a/configure
+++ b/configure
@@ -470,7 +470,7 @@ ac_includes_default="\
 # include <unistd.h>
 #endif"
 
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM AWK SET_MAKE MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT DEBUG_TRUE DEBUG_FALSE REALLYSTATIC_TRUE REALLYSTATIC_FALSE CXX CXXFLAGS LDFLAGS CPPFLAGS ac_ct_CXX EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CXXDEPMODE CC CFLAGS ac_ct_CC CCDEPMODE LN_S RANLIB ac_ct_RANLIB PKG_CONFIG GLIB_CFLAGS GLIB_LIBS GLIB_GENMARSHAL GOBJECT_QUERY GLIB_MKENUMS GNOME_VFS_MODULE_CFLAGS GNOME_VFS_MODULE_LIBS ECHO CPP EGREP LIBTOOL LIBTOOL_DEPS all_includes all_libraries LIBNTFS_GNOMEVFS_CFLAGS LIBNTFS_GNOMEVFS_LIBS AUTODIRS GCC_NEEDS_MS_EXTENSIONS_TRUE GCC_NEEDS_MS_EXTENSIONS_FALSE LIBOBJS LTLIBOBJS'
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM AWK SET_MAKE MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT DEBUG_TRUE DEBUG_FALSE REALLYSTATIC_TRUE REALLYSTATIC_FALSE CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE LN_S RANLIB ac_ct_RANLIB PKG_CONFIG LIBNTFS_GNOMEVFS_CFLAGS LIBNTFS_GNOMEVFS_LIBS ENABLE_GNOME_VFS_TRUE ENABLE_GNOME_VFS_FALSE ECHO CPP EGREP LIBTOOL LIBTOOL_DEPS all_includes all_libraries AUTODIRS GCC_NEEDS_MS_EXTENSIONS_TRUE GCC_NEEDS_MS_EXTENSIONS_FALSE LIBOBJS LTLIBOBJS'
 ac_subst_files=''
 
 # Initialize some variables set by options.
@@ -911,22 +911,6 @@ ac_env_target_alias_set=${target_alias+set}
 ac_env_target_alias_value=$target_alias
 ac_cv_env_target_alias_set=${target_alias+set}
 ac_cv_env_target_alias_value=$target_alias
-ac_env_CXX_set=${CXX+set}
-ac_env_CXX_value=$CXX
-ac_cv_env_CXX_set=${CXX+set}
-ac_cv_env_CXX_value=$CXX
-ac_env_CXXFLAGS_set=${CXXFLAGS+set}
-ac_env_CXXFLAGS_value=$CXXFLAGS
-ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set}
-ac_cv_env_CXXFLAGS_value=$CXXFLAGS
-ac_env_LDFLAGS_set=${LDFLAGS+set}
-ac_env_LDFLAGS_value=$LDFLAGS
-ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
-ac_cv_env_LDFLAGS_value=$LDFLAGS
-ac_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_env_CPPFLAGS_value=$CPPFLAGS
-ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_cv_env_CPPFLAGS_value=$CPPFLAGS
 ac_env_CC_set=${CC+set}
 ac_env_CC_value=$CC
 ac_cv_env_CC_set=${CC+set}
@@ -935,6 +919,14 @@ ac_env_CFLAGS_set=${CFLAGS+set}
 ac_env_CFLAGS_value=$CFLAGS
 ac_cv_env_CFLAGS_set=${CFLAGS+set}
 ac_cv_env_CFLAGS_value=$CFLAGS
+ac_env_LDFLAGS_set=${LDFLAGS+set}
+ac_env_LDFLAGS_value=$LDFLAGS
+ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
+ac_cv_env_LDFLAGS_value=$LDFLAGS
+ac_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_env_CPPFLAGS_value=$CPPFLAGS
+ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_cv_env_CPPFLAGS_value=$CPPFLAGS
 ac_env_CPP_set=${CPP+set}
 ac_env_CPP_value=$CPP
 ac_cv_env_CPP_set=${CPP+set}
@@ -1029,7 +1021,7 @@ Optional Features:
   --enable-really-static  completely static binaries
   --disable-dependency-tracking Speeds up one-time builds
   --enable-dependency-tracking  Do not reject slow dependency extractors
-  --disable-glibtest      do not try to compile and run a test GLIB program
+  --disable-gnome-vfs     Omit Gnome-VFS-2.0 'libntfs' interface (default=detect)
   --enable-fast-install=PKGS  optimize for fast installation default=yes
   --disable-libtool-lock  avoid locking (might break parallel builds)
 
@@ -1040,14 +1032,12 @@ Optional Packages:
   --with-pic              try to use only PIC/non-PIC objects default=use both
 
 Some influential environment variables:
-  CXX         C++ compiler command
-  CXXFLAGS    C++ compiler flags
+  CC          C compiler command
+  CFLAGS      C compiler flags
   LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
               nonstandard directory <lib dir>
   CPPFLAGS    C/C++ preprocessor flags, e.g. -I<include dir> if you have
               headers in a nonstandard directory <include dir>
-  CC          C compiler command
-  CFLAGS      C compiler flags
   CPP         C preprocessor
 
 Use these variables to override the choices made by `configure' or to help
@@ -2067,671 +2057,6 @@ if test "$USE_MAINTAINER_MODE" = "yes";then
 fi
 
 # Checks for programs.
-ac_ext=cc
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-if test -n "$ac_tool_prefix"; then
-  for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CXX+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$CXX"; then
-  ac_cv_prog_CXX="$CXX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-CXX=$ac_cv_prog_CXX
-if test -n "$CXX"; then
-  echo "$as_me:$LINENO: result: $CXX" >&5
-echo "${ECHO_T}$CXX" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-    test -n "$CXX" && break
-  done
-fi
-if test -z "$CXX"; then
-  ac_ct_CXX=$CXX
-  for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_CXX"; then
-  ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CXX="$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
-if test -n "$ac_ct_CXX"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
-echo "${ECHO_T}$ac_ct_CXX" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  test -n "$ac_ct_CXX" && break
-done
-test -n "$ac_ct_CXX" || ac_ct_CXX="g++"
-
-  CXX=$ac_ct_CXX
-fi
-
-
-# Provide some information about the compiler.
-echo "$as_me:$LINENO:" \
-     "checking for C++ compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
-  (eval $ac_compiler --version </dev/null >&5) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
-  (eval $ac_compiler -v </dev/null >&5) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
-  (eval $ac_compiler -V </dev/null >&5) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.exe b.out"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-echo "$as_me:$LINENO: checking for C++ compiler default output" >&5
-echo $ECHO_N "checking for C++ compiler default output... $ECHO_C" >&6
-ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
-  (eval $ac_link_default) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  # Find the output, starting from the most likely.  This scheme is
-# not robust to junk in `.', hence go to wildcards (a.*) only as a last
-# resort.
-
-# Be careful to initialize this variable, since it used to be cached.
-# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
-ac_cv_exeext=
-# b.out is created by i960 compilers.
-for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
-do
-  test -f "$ac_file" || continue
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
-        ;;
-    conftest.$ac_ext )
-        # This is the source file.
-        ;;
-    [ab].out )
-        # We found the default executable, but exeext='' is most
-        # certainly right.
-        break;;
-    *.* )
-        ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-        # FIXME: I believe we export ac_cv_exeext for Libtool,
-        # but it would be cool to find out if it's true.  Does anybody
-        # maintain Libtool? --akim.
-        export ac_cv_exeext
-        break;;
-    * )
-        break;;
-  esac
-done
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { echo "$as_me:$LINENO: error: C++ compiler cannot create executables
-See \`config.log' for more details." >&5
-echo "$as_me: error: C++ compiler cannot create executables
-See \`config.log' for more details." >&2;}
-   { (exit 77); exit 77; }; }
-fi
-
-ac_exeext=$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_file" >&5
-echo "${ECHO_T}$ac_file" >&6
-
-# Check the compiler produces executables we can run.  If not, either
-# the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether the C++ compiler works" >&5
-echo $ECHO_N "checking whether the C++ compiler works... $ECHO_C" >&6
-# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
-# If not cross compiling, check that we can run a simple program.
-if test "$cross_compiling" != yes; then
-  if { ac_try='./$ac_file'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-    cross_compiling=no
-  else
-    if test "$cross_compiling" = maybe; then
-	cross_compiling=yes
-    else
-	{ { echo "$as_me:$LINENO: error: cannot run C++ compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run C++ compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-    fi
-  fi
-fi
-echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-
-rm -f a.out a.exe conftest$ac_cv_exeext b.out
-ac_clean_files=$ac_clean_files_save
-# Check the compiler produces executables we can run.  If not, either
-# the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
-echo "$as_me:$LINENO: result: $cross_compiling" >&5
-echo "${ECHO_T}$cross_compiling" >&6
-
-echo "$as_me:$LINENO: checking for suffix of executables" >&5
-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in conftest.exe conftest conftest.*; do
-  test -f "$ac_file" || continue
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
-    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-          export ac_cv_exeext
-          break;;
-    * ) break;;
-  esac
-done
-else
-  { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-echo "${ECHO_T}$ac_cv_exeext" >&6
-
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-echo "$as_me:$LINENO: checking for suffix of object files" >&5
-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
-if test "${ac_cv_objext+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
-    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
-       break;;
-  esac
-done
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-echo "${ECHO_T}$ac_cv_objext" >&6
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6
-if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-#ifndef __GNUC__
-       choke me
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_compiler_gnu=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_compiler_gnu=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6
-GXX=`test $ac_compiler_gnu = yes && echo yes`
-ac_test_CXXFLAGS=${CXXFLAGS+set}
-ac_save_CXXFLAGS=$CXXFLAGS
-CXXFLAGS="-g"
-echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
-echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6
-if test "${ac_cv_prog_cxx_g+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_prog_cxx_g=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_prog_cxx_g=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6
-if test "$ac_test_CXXFLAGS" = set; then
-  CXXFLAGS=$ac_save_CXXFLAGS
-elif test $ac_cv_prog_cxx_g = yes; then
-  if test "$GXX" = yes; then
-    CXXFLAGS="-g -O2"
-  else
-    CXXFLAGS="-g"
-  fi
-else
-  if test "$GXX" = yes; then
-    CXXFLAGS="-O2"
-  else
-    CXXFLAGS=
-  fi
-fi
-for ac_declaration in \
-   ''\
-   '#include <stdlib.h>' \
-   'extern "C" void std::exit (int) throw (); using std::exit;' \
-   'extern "C" void std::exit (int); using std::exit;' \
-   'extern "C" void exit (int) throw ();' \
-   'extern "C" void exit (int);' \
-   'void exit (int);'
-do
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <stdlib.h>
-$ac_declaration
-int
-main ()
-{
-exit (42);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-continue
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_declaration
-int
-main ()
-{
-exit (42);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-done
-rm -f conftest*
-if test -n "$ac_declaration"; then
-  echo '#ifdef __cplusplus' >>confdefs.h
-  echo $ac_declaration      >>confdefs.h
-  echo '#endif'             >>confdefs.h
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-rm -f .deps 2>/dev/null
-mkdir .deps 2>/dev/null
-if test -d .deps; then
-  DEPDIR=.deps
-else
-  # MS-DOS does not allow filenames that begin with a dot.
-  DEPDIR=_deps
-fi
-rmdir .deps 2>/dev/null
-
-
-          ac_config_commands="$ac_config_commands depfiles"
-
-
-am_make=${MAKE-make}
-cat > confinc << 'END'
-doit:
-	@echo done
-END
-# If we don't find an include directive, just comment out the code.
-echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
-echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then
-   am__include=include
-   am__quote=
-   _am_result=GNU
-fi
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
-   echo '.include "confinc"' > confmf
-   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
-      am__include=.include
-      am__quote="\""
-      _am_result=BSD
-   fi
-fi
-
-
-echo "$as_me:$LINENO: result: $_am_result" >&5
-echo "${ECHO_T}$_am_result" >&6
-rm -f confinc confmf
-
-# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
-if test "${enable_dependency_tracking+set}" = set; then
-  enableval="$enable_dependency_tracking"
-
-fi;
-if test "x$enable_dependency_tracking" != xno; then
-  am_depcomp="$ac_aux_dir/depcomp"
-  AMDEPBACKSLASH='\'
-fi
-
-
-if test "x$enable_dependency_tracking" != xno; then
-  AMDEP_TRUE=
-  AMDEP_FALSE='#'
-else
-  AMDEP_TRUE='#'
-  AMDEP_FALSE=
-fi
-
-
-
-
-depcc="$CXX"  am_compiler_list=
-
-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
-if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-
-  am_cv_CXX_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
-  fi
-  for depmode in $am_compiler_list; do
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    echo '#include "conftest.h"' > conftest.c
-    echo 'int i;' > conftest.h
-    echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
-
-    case $depmode in
-    nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
-      if test "x$enable_dependency_tracking" = xyes; then
-	continue
-      else
-	break
-      fi
-      ;;
-    none) break ;;
-    esac
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.
-    if depmode=$depmode \
-       source=conftest.c object=conftest.o \
-       depfile=conftest.Po tmpdepfile=conftest.TPo \
-       $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 &&
-       grep conftest.h conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      am_cv_CXX_dependencies_compiler_type=$depmode
-      break
-    fi
-  done
-
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_CXX_dependencies_compiler_type=none
-fi
-
-fi
-echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6
-CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
-
-
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -3067,6 +2392,209 @@ ac_compiler=`set X $ac_compile; echo $2`
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
 
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+echo "$as_me:$LINENO: checking for C compiler default output" >&5
+echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6
+ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
+  (eval $ac_link_default) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+  # Find the output, starting from the most likely.  This scheme is
+# not robust to junk in `.', hence go to wildcards (a.*) only as a last
+# resort.
+
+# Be careful to initialize this variable, since it used to be cached.
+# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
+ac_cv_exeext=
+# b.out is created by i960 compilers.
+for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
+do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
+        ;;
+    conftest.$ac_ext )
+        # This is the source file.
+        ;;
+    [ab].out )
+        # We found the default executable, but exeext='' is most
+        # certainly right.
+        break;;
+    *.* )
+        ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+        # FIXME: I believe we export ac_cv_exeext for Libtool,
+        # but it would be cool to find out if it's true.  Does anybody
+        # maintain Libtool? --akim.
+        export ac_cv_exeext
+        break;;
+    * )
+        break;;
+  esac
+done
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
+See \`config.log' for more details." >&5
+echo "$as_me: error: C compiler cannot create executables
+See \`config.log' for more details." >&2;}
+   { (exit 77); exit 77; }; }
+fi
+
+ac_exeext=$ac_cv_exeext
+echo "$as_me:$LINENO: result: $ac_file" >&5
+echo "${ECHO_T}$ac_file" >&6
+
+# Check the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
+# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
+# If not cross compiling, check that we can run a simple program.
+if test "$cross_compiling" != yes; then
+  if { ac_try='./$ac_file'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+    cross_compiling=no
+  else
+    if test "$cross_compiling" = maybe; then
+	cross_compiling=yes
+    else
+	{ { echo "$as_me:$LINENO: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }
+    fi
+  fi
+fi
+echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+
+rm -f a.out a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+# Check the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
+echo "$as_me:$LINENO: result: $cross_compiling" >&5
+echo "${ECHO_T}$cross_compiling" >&6
+
+echo "$as_me:$LINENO: checking for suffix of executables" >&5
+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+          export ac_cv_exeext
+          break;;
+    * ) break;;
+  esac
+done
+else
+  { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest$ac_cv_exeext
+echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+echo "${ECHO_T}$ac_cv_exeext" >&6
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+echo "$as_me:$LINENO: checking for suffix of object files" >&5
+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
+if test "${ac_cv_objext+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+  for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
+    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+       break;;
+  esac
+done
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+echo "${ECHO_T}$ac_cv_objext" >&6
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
 echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
 echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
 if test "${ac_cv_c_compiler_gnu+set}" = set; then
@@ -3396,6 +2924,79 @@ ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
+rm -f .deps 2>/dev/null
+mkdir .deps 2>/dev/null
+if test -d .deps; then
+  DEPDIR=.deps
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  DEPDIR=_deps
+fi
+rmdir .deps 2>/dev/null
+
+
+          ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+doit:
+	@echo done
+END
+# If we don't find an include directive, just comment out the code.
+echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
+echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then
+   am__include=include
+   am__quote=
+   _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+      am__include=.include
+      am__quote="\""
+      _am_result=BSD
+   fi
+fi
+
+
+echo "$as_me:$LINENO: result: $_am_result" >&5
+echo "${ECHO_T}$_am_result" >&6
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then
+  enableval="$enable_dependency_tracking"
+
+fi;
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+
+
+if test "x$enable_dependency_tracking" != xno; then
+  AMDEP_TRUE=
+  AMDEP_FALSE='#'
+else
+  AMDEP_TRUE='#'
+  AMDEP_FALSE=
+fi
+
+
+
 
 depcc="$CC"   am_compiler_list=
 
@@ -3664,322 +3265,16 @@ else
 fi
 
 
-
-# Check whether --enable-glibtest or --disable-glibtest was given.
-if test "${enable_glibtest+set}" = set; then
-  enableval="$enable_glibtest"
+# Check whether --enable-gnome-vfs or --disable-gnome-vfs was given.
+if test "${enable_gnome_vfs+set}" = set; then
+  enableval="$enable_gnome_vfs"
 
 else
-  enable_glibtest=yes
+  enable_gnome_vfs=auto
+
 fi;
-
-  pkg_config_args=glib-2.0
-  for module in . gmodule gobject
-  do
-      case "$module" in
-         gmodule)
-             pkg_config_args="$pkg_config_args gmodule-2.0"
-         ;;
-         gobject)
-             pkg_config_args="$pkg_config_args gobject-2.0"
-         ;;
-         gthread)
-             pkg_config_args="$pkg_config_args gthread-2.0"
-         ;;
-      esac
-  done
-
-  # Extract the first word of "pkg-config", so it can be a program name with args.
-set dummy pkg-config; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PKG_CONFIG+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PKG_CONFIG in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  test -z "$ac_cv_path_PKG_CONFIG" && ac_cv_path_PKG_CONFIG="no"
-  ;;
-esac
-fi
-PKG_CONFIG=$ac_cv_path_PKG_CONFIG
-
-if test -n "$PKG_CONFIG"; then
-  echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5
-echo "${ECHO_T}$PKG_CONFIG" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-
-  no_glib=""
-
-  if test x$PKG_CONFIG != xno ; then
-    if $PKG_CONFIG --atleast-pkgconfig-version 0.7 ; then
-      :
-    else
-      echo *** pkg-config too old; version 0.7 or better required.
-      no_glib=yes
-      PKG_CONFIG=no
-    fi
-  else
-    no_glib=yes
-  fi
-
-  min_glib_version=2.0.0
-  echo "$as_me:$LINENO: checking for GLIB - version >= $min_glib_version" >&5
-echo $ECHO_N "checking for GLIB - version >= $min_glib_version... $ECHO_C" >&6
-
-  if test x$PKG_CONFIG != xno ; then
-    ## don't try to run the test against uninstalled libtool libs
-    if $PKG_CONFIG --uninstalled $pkg_config_args; then
-	  echo "Will use uninstalled version of GLib found in PKG_CONFIG_PATH"
-	  enable_glibtest=no
-    fi
-
-    if $PKG_CONFIG --atleast-version $min_glib_version $pkg_config_args; then
-	  :
-    else
-	  no_glib=yes
-    fi
-  fi
-
-  if test x"$no_glib" = x ; then
-    GLIB_GENMARSHAL=`$PKG_CONFIG --variable=glib_genmarshal glib-2.0`
-    GOBJECT_QUERY=`$PKG_CONFIG --variable=gobject_query glib-2.0`
-    GLIB_MKENUMS=`$PKG_CONFIG --variable=glib_mkenums glib-2.0`
-
-    GLIB_CFLAGS=`$PKG_CONFIG --cflags $pkg_config_args`
-    GLIB_LIBS=`$PKG_CONFIG --libs $pkg_config_args`
-    glib_config_major_version=`$PKG_CONFIG --modversion glib-2.0 | \
-           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
-    glib_config_minor_version=`$PKG_CONFIG --modversion glib-2.0 | \
-           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
-    glib_config_micro_version=`$PKG_CONFIG --modversion glib-2.0 | \
-           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`
-    if test "x$enable_glibtest" = "xyes" ; then
-      ac_save_CFLAGS="$CFLAGS"
-      ac_save_LIBS="$LIBS"
-      CFLAGS="$CFLAGS $GLIB_CFLAGS"
-      LIBS="$GLIB_LIBS $LIBS"
-      rm -f conf.glibtest
-      if test "$cross_compiling" = yes; then
-  echo $ac_n "cross compiling; assumed OK... $ac_c"
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <glib.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-int
-main ()
-{
-  int major, minor, micro;
-  char *tmp_version;
-
-  system ("touch conf.glibtest");
-
-  /* HP/UX 9 (%@#!) writes to sscanf strings */
-  tmp_version = g_strdup("$min_glib_version");
-  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
-     printf("%s, bad version string\n", "$min_glib_version");
-     exit(1);
-   }
-
-  if ((glib_major_version != $glib_config_major_version) ||
-      (glib_minor_version != $glib_config_minor_version) ||
-      (glib_micro_version != $glib_config_micro_version))
-    {
-      printf("\n*** 'pkg-config --modversion glib-2.0' returned %d.%d.%d, but GLIB (%d.%d.%d)\n",
-             $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version,
-             glib_major_version, glib_minor_version, glib_micro_version);
-      printf ("*** was found! If pkg-config was correct, then it is best\n");
-      printf ("*** to remove the old version of GLib. You may also be able to fix the error\n");
-      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
-      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
-      printf("*** required on your system.\n");
-      printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n");
-      printf("*** to point to the correct configuration files\n");
-    }
-  else if ((glib_major_version != GLIB_MAJOR_VERSION) ||
-	   (glib_minor_version != GLIB_MINOR_VERSION) ||
-           (glib_micro_version != GLIB_MICRO_VERSION))
-    {
-      printf("*** GLIB header files (version %d.%d.%d) do not match\n",
-	     GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION);
-      printf("*** library (version %d.%d.%d)\n",
-	     glib_major_version, glib_minor_version, glib_micro_version);
-    }
-  else
-    {
-      if ((glib_major_version > major) ||
-        ((glib_major_version == major) && (glib_minor_version > minor)) ||
-        ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro)))
-      {
-        return 0;
-       }
-     else
-      {
-        printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n",
-               glib_major_version, glib_minor_version, glib_micro_version);
-        printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n",
-	       major, minor, micro);
-        printf("*** GLIB is always available from ftp://ftp.gtk.org.\n");
-        printf("***\n");
-        printf("*** If you have already installed a sufficiently new version, this error\n");
-        printf("*** probably means that the wrong copy of the pkg-config shell script is\n");
-        printf("*** being found. The easiest way to fix this is to remove the old version\n");
-        printf("*** of GLIB, but you can also set the PKG_CONFIG environment to point to the\n");
-        printf("*** correct copy of pkg-config. (In this case, you will have to\n");
-        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
-        printf("*** so that the correct libraries are found at run-time))\n");
-      }
-    }
-  return 1;
-}
-
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  :
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-no_glib=yes
-fi
-rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-       CFLAGS="$ac_save_CFLAGS"
-       LIBS="$ac_save_LIBS"
-     fi
-  fi
-  if test "x$no_glib" = x ; then
-     echo "$as_me:$LINENO: result: yes (version $glib_config_major_version.$glib_config_minor_version.$glib_config_micro_version)" >&5
-echo "${ECHO_T}yes (version $glib_config_major_version.$glib_config_minor_version.$glib_config_micro_version)" >&6
-     :
-  else
-     echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-     if test "$PKG_CONFIG" = "no" ; then
-       echo "*** A new enough version of pkg-config was not found."
-       echo "*** See http://www.freedesktop.org/software/pkgconfig/"
-     else
-       if test -f conf.glibtest ; then
-        :
-       else
-          echo "*** Could not run GLIB test program, checking why..."
-          ac_save_CFLAGS="$CFLAGS"
-          ac_save_LIBS="$LIBS"
-          CFLAGS="$CFLAGS $GLIB_CFLAGS"
-          LIBS="$LIBS $GLIB_LIBS"
-          cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <glib.h>
-#include <stdio.h>
-
-int
-main ()
-{
- return ((glib_major_version) || (glib_minor_version) || (glib_micro_version));
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   echo "*** The test program compiled, but did not run. This usually means"
-          echo "*** that the run-time linker is not finding GLIB or finding the wrong"
-          echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your"
-          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
-          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
-          echo "*** is required on your system"
-	  echo "***"
-          echo "*** If you have an old version installed, it is best to remove it, although"
-          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- echo "*** The test program failed to compile or link. See the file config.log for the"
-          echo "*** exact error that occured. This usually means GLIB is incorrectly installed."
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-          CFLAGS="$ac_save_CFLAGS"
-          LIBS="$ac_save_LIBS"
-       fi
-     fi
-     GLIB_CFLAGS=""
-     GLIB_LIBS=""
-     GLIB_GENMARSHAL=""
-     GOBJECT_QUERY=""
-     GLIB_MKENUMS=""
-     { { echo "$as_me:$LINENO: error: Linux-NTFS Gnome VFS module requires glib-2.0 library." >&5
-echo "$as_me: error: Linux-NTFS Gnome VFS module requires glib-2.0 library." >&2;}
-   { (exit 1); exit 1; }; }
-  fi
-
-
-
-
-
-  rm -f conf.glibtest
-
-LIBNTFS_GNOMEVFS_CFLAGS="$CFLAGS $GLIB_CFLAGS"
-LIBNTFS_GNOMEVFS_LIBS="$LIBS $GLIB_LIBS"
-
+compile_gnome_vfs=false
+if test "$enable_gnome_vfs" != "no";then
 
   succeeded=no
 
@@ -4034,32 +3329,32 @@ fi
   else
      PKG_CONFIG_MIN_VERSION=0.9.0
      if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then
-        echo "$as_me:$LINENO: checking for gnome-vfs-module-2.0" >&5
-echo $ECHO_N "checking for gnome-vfs-module-2.0... $ECHO_C" >&6
+        echo "$as_me:$LINENO: checking for glib-2.0 gthread-2.0 gnome-vfs-module-2.0" >&5
+echo $ECHO_N "checking for glib-2.0 gthread-2.0 gnome-vfs-module-2.0... $ECHO_C" >&6
 
-        if $PKG_CONFIG --exists "gnome-vfs-module-2.0" ; then
+        if $PKG_CONFIG --exists "glib-2.0 gthread-2.0 gnome-vfs-module-2.0" ; then
             echo "$as_me:$LINENO: result: yes" >&5
 echo "${ECHO_T}yes" >&6
             succeeded=yes
 
-            echo "$as_me:$LINENO: checking GNOME_VFS_MODULE_CFLAGS" >&5
-echo $ECHO_N "checking GNOME_VFS_MODULE_CFLAGS... $ECHO_C" >&6
-            GNOME_VFS_MODULE_CFLAGS=`$PKG_CONFIG --cflags "gnome-vfs-module-2.0"`
-            echo "$as_me:$LINENO: result: $GNOME_VFS_MODULE_CFLAGS" >&5
-echo "${ECHO_T}$GNOME_VFS_MODULE_CFLAGS" >&6
+            echo "$as_me:$LINENO: checking LIBNTFS_GNOMEVFS_CFLAGS" >&5
+echo $ECHO_N "checking LIBNTFS_GNOMEVFS_CFLAGS... $ECHO_C" >&6
+            LIBNTFS_GNOMEVFS_CFLAGS=`$PKG_CONFIG --cflags "glib-2.0 gthread-2.0 gnome-vfs-module-2.0"`
+            echo "$as_me:$LINENO: result: $LIBNTFS_GNOMEVFS_CFLAGS" >&5
+echo "${ECHO_T}$LIBNTFS_GNOMEVFS_CFLAGS" >&6
 
-            echo "$as_me:$LINENO: checking GNOME_VFS_MODULE_LIBS" >&5
-echo $ECHO_N "checking GNOME_VFS_MODULE_LIBS... $ECHO_C" >&6
-            GNOME_VFS_MODULE_LIBS=`$PKG_CONFIG --libs "gnome-vfs-module-2.0"`
-            echo "$as_me:$LINENO: result: $GNOME_VFS_MODULE_LIBS" >&5
-echo "${ECHO_T}$GNOME_VFS_MODULE_LIBS" >&6
+            echo "$as_me:$LINENO: checking LIBNTFS_GNOMEVFS_LIBS" >&5
+echo $ECHO_N "checking LIBNTFS_GNOMEVFS_LIBS... $ECHO_C" >&6
+            LIBNTFS_GNOMEVFS_LIBS=`$PKG_CONFIG --libs "glib-2.0 gthread-2.0 gnome-vfs-module-2.0"`
+            echo "$as_me:$LINENO: result: $LIBNTFS_GNOMEVFS_LIBS" >&5
+echo "${ECHO_T}$LIBNTFS_GNOMEVFS_LIBS" >&6
         else
-            GNOME_VFS_MODULE_CFLAGS=""
-            GNOME_VFS_MODULE_LIBS=""
+            LIBNTFS_GNOMEVFS_CFLAGS=""
+            LIBNTFS_GNOMEVFS_LIBS=""
             ## If we have a custom action on failure, don't print errors, but
             ## do set a variable so people can do so.
-            GNOME_VFS_MODULE_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "gnome-vfs-module-2.0"`
-            echo $GNOME_VFS_MODULE_PKG_ERRORS
+            LIBNTFS_GNOMEVFS_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "glib-2.0 gthread-2.0 gnome-vfs-module-2.0"`
+
         fi
 
 
@@ -4071,15 +3366,31 @@ echo "${ECHO_T}$GNOME_VFS_MODULE_LIBS" >&6
   fi
 
   if test $succeeded = yes; then
-     :
+      compile_gnome_vfs=true
   else
-     { { echo "$as_me:$LINENO: error: Library requirements (gnome-vfs-module-2.0) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them." >&5
-echo "$as_me: error: Library requirements (gnome-vfs-module-2.0) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them." >&2;}
+
+		if test "$enable_gnome_vfs" = "yes";then
+			{ { echo "$as_me:$LINENO: error: Linux-NTFS Gnome VFS module requires glib-2.0 and gnome-vfs-module-2.0 librares." >&5
+echo "$as_me: error: Linux-NTFS Gnome VFS module requires glib-2.0 and gnome-vfs-module-2.0 librares." >&2;}
    { (exit 1); exit 1; }; }
+		else
+			{ echo "$as_me:$LINENO: WARNING: Linux-NTFS Gnome VFS module requires glib-2.0 and gnome-vfs-module-2.0 librares." >&5
+echo "$as_me: WARNING: Linux-NTFS Gnome VFS module requires glib-2.0 and gnome-vfs-module-2.0 librares." >&2;}
+		fi
+
   fi
 
-LIBNTFS_GNOMEVFS_CFLAGS="$LIBNTFS_GNOMEVFS_CFLAGS $CFLAGS $GNOME_VFS_MODULE_CFLAGS"
-LIBNTFS_GNOMEVFS_LIBS="$LIBNTFS_GNOMEVFS_LIBS $LIBS $GNOME_VFS_MODULE_LIBS"
+fi
+
+
+if $compile_gnome_vfs; then
+  ENABLE_GNOME_VFS_TRUE=
+  ENABLE_GNOME_VFS_FALSE='#'
+else
+  ENABLE_GNOME_VFS_TRUE='#'
+  ENABLE_GNOME_VFS_FALSE=
+fi
+
 
 # create a working libtool-script
 if test -z "$LIBTOOL"; then
@@ -4550,6 +3861,7 @@ deplibs_check_method=$lt_cv_deplibs_check_method
 
 
 
+
 # Check for command to grab the raw symbol name followed by C symbol from nm.
 echo "$as_me:$LINENO: checking command to parse $NM output" >&5
 echo $ECHO_N "checking command to parse $NM output... $ECHO_C" >&6
@@ -5683,7 +4995,7 @@ test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
 case $host in
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 5686 "configure"' > conftest.$ac_ext
+  echo '#line 4998 "configure"' > conftest.$ac_ext
   if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
@@ -6212,7 +5524,7 @@ chmod -w .
 save_CFLAGS="$CFLAGS"
 CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"
 compiler_c_o=no
-if { (eval echo configure:6215: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
+if { (eval echo configure:5527: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
   # The compiler can only warn and ignore the option if not recognized
   # So say no if there are warnings
   if test -s out/conftest.err; then
@@ -7396,7 +6708,7 @@ linux-gnu*)
   libsuff=
   case "$host_cpu" in
   x86_64*|s390x*)
-    echo '#line 7399 "configure"' > conftest.$ac_ext
+    echo '#line 6711 "configure"' > conftest.$ac_ext
     if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
@@ -8068,7 +7380,7 @@ else
     lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 8071 "configure"
+#line 7383 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -8166,7 +7478,7 @@ else
     lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 8169 "configure"
+#line 7481 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11572,6 +10884,13 @@ echo "$as_me: error: conditional \"AMDEP\" was never defined.
 Usually this means the macro was only invoked conditionally." >&2;}
    { (exit 1); exit 1; }; }
 fi
+if test -z "${ENABLE_GNOME_VFS_TRUE}" && test -z "${ENABLE_GNOME_VFS_FALSE}"; then
+  { { echo "$as_me:$LINENO: error: conditional \"ENABLE_GNOME_VFS\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"ENABLE_GNOME_VFS\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
 if test -z "${GCC_NEEDS_MS_EXTENSIONS_TRUE}" && test -z "${GCC_NEEDS_MS_EXTENSIONS_FALSE}"; then
   { { echo "$as_me:$LINENO: error: conditional \"GCC_NEEDS_MS_EXTENSIONS\" was never defined.
 Usually this means the macro was only invoked conditionally." >&5
@@ -12164,11 +11483,11 @@ s,@DEBUG_TRUE@,$DEBUG_TRUE,;t t
 s,@DEBUG_FALSE@,$DEBUG_FALSE,;t t
 s,@REALLYSTATIC_TRUE@,$REALLYSTATIC_TRUE,;t t
 s,@REALLYSTATIC_FALSE@,$REALLYSTATIC_FALSE,;t t
-s,@CXX@,$CXX,;t t
-s,@CXXFLAGS@,$CXXFLAGS,;t t
+s,@CC@,$CC,;t t
+s,@CFLAGS@,$CFLAGS,;t t
 s,@LDFLAGS@,$LDFLAGS,;t t
 s,@CPPFLAGS@,$CPPFLAGS,;t t
-s,@ac_ct_CXX@,$ac_ct_CXX,;t t
+s,@ac_ct_CC@,$ac_ct_CC,;t t
 s,@EXEEXT@,$EXEEXT,;t t
 s,@OBJEXT@,$OBJEXT,;t t
 s,@DEPDIR@,$DEPDIR,;t t
@@ -12177,22 +11496,15 @@ s,@am__quote@,$am__quote,;t t
 s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t
 s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t
 s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
-s,@CXXDEPMODE@,$CXXDEPMODE,;t t
-s,@CC@,$CC,;t t
-s,@CFLAGS@,$CFLAGS,;t t
-s,@ac_ct_CC@,$ac_ct_CC,;t t
 s,@CCDEPMODE@,$CCDEPMODE,;t t
 s,@LN_S@,$LN_S,;t t
 s,@RANLIB@,$RANLIB,;t t
 s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
 s,@PKG_CONFIG@,$PKG_CONFIG,;t t
-s,@GLIB_CFLAGS@,$GLIB_CFLAGS,;t t
-s,@GLIB_LIBS@,$GLIB_LIBS,;t t
-s,@GLIB_GENMARSHAL@,$GLIB_GENMARSHAL,;t t
-s,@GOBJECT_QUERY@,$GOBJECT_QUERY,;t t
-s,@GLIB_MKENUMS@,$GLIB_MKENUMS,;t t
-s,@GNOME_VFS_MODULE_CFLAGS@,$GNOME_VFS_MODULE_CFLAGS,;t t
-s,@GNOME_VFS_MODULE_LIBS@,$GNOME_VFS_MODULE_LIBS,;t t
+s,@LIBNTFS_GNOMEVFS_CFLAGS@,$LIBNTFS_GNOMEVFS_CFLAGS,;t t
+s,@LIBNTFS_GNOMEVFS_LIBS@,$LIBNTFS_GNOMEVFS_LIBS,;t t
+s,@ENABLE_GNOME_VFS_TRUE@,$ENABLE_GNOME_VFS_TRUE,;t t
+s,@ENABLE_GNOME_VFS_FALSE@,$ENABLE_GNOME_VFS_FALSE,;t t
 s,@ECHO@,$ECHO,;t t
 s,@CPP@,$CPP,;t t
 s,@EGREP@,$EGREP,;t t
@@ -12200,8 +11512,6 @@ s,@LIBTOOL@,$LIBTOOL,;t t
 s,@LIBTOOL_DEPS@,$LIBTOOL_DEPS,;t t
 s,@all_includes@,$all_includes,;t t
 s,@all_libraries@,$all_libraries,;t t
-s,@LIBNTFS_GNOMEVFS_CFLAGS@,$LIBNTFS_GNOMEVFS_CFLAGS,;t t
-s,@LIBNTFS_GNOMEVFS_LIBS@,$LIBNTFS_GNOMEVFS_LIBS,;t t
 s,@AUTODIRS@,$AUTODIRS,;t t
 s,@GCC_NEEDS_MS_EXTENSIONS_TRUE@,$GCC_NEEDS_MS_EXTENSIONS_TRUE,;t t
 s,@GCC_NEEDS_MS_EXTENSIONS_FALSE@,$GCC_NEEDS_MS_EXTENSIONS_FALSE,;t t
diff --git a/configure.ac b/configure.ac
index 2ef5ed60..75bfd3f3 100644
--- a/configure.ac
+++ b/configure.ac
@@ -67,22 +67,29 @@ if test "$USE_MAINTAINER_MODE" = "yes";then
 fi
 
 # Checks for programs.
-AC_PROG_CXX
 AC_PROG_CC
 AC_PROG_INSTALL
 AC_PROG_LN_S
 AC_PROG_MAKE_SET
 AC_PROG_RANLIB
 
-AM_PATH_GLIB_2_0(,,[AC_MSG_ERROR([Linux-NTFS Gnome VFS module requires glib-2.0 library.])],[gmodule gobject])
-dnl Force glib-2.0 for the whole package
-LIBNTFS_GNOMEVFS_CFLAGS="$CFLAGS $GLIB_CFLAGS"
-LIBNTFS_GNOMEVFS_LIBS="$LIBS $GLIB_LIBS"
-
-PKG_CHECK_MODULES(GNOME_VFS_MODULE,gnome-vfs-module-2.0)
-dnl Force gnome-vfs-module-2.0 for the whole package
-LIBNTFS_GNOMEVFS_CFLAGS="$LIBNTFS_GNOMEVFS_CFLAGS $CFLAGS $GNOME_VFS_MODULE_CFLAGS"
-LIBNTFS_GNOMEVFS_LIBS="$LIBNTFS_GNOMEVFS_LIBS $LIBS $GNOME_VFS_MODULE_LIBS"
+AC_ARG_ENABLE(gnome-vfs,
+	[  --disable-gnome-vfs     Omit Gnome-VFS-2.0 'libntfs' interface (default=detect)], ,
+	enable_gnome_vfs=auto
+)
+compile_gnome_vfs=false
+if test "$enable_gnome_vfs" != "no";then
+	PKG_CHECK_MODULES(LIBNTFS_GNOMEVFS, [glib-2.0 gthread-2.0 gnome-vfs-module-2.0],
+	[ compile_gnome_vfs=true ],
+	[
+		if test "$enable_gnome_vfs" = "yes";then
+			AC_MSG_ERROR([Linux-NTFS Gnome VFS module requires glib-2.0 and gnome-vfs-module-2.0 librares.])
+		else
+			AC_MSG_WARN([Linux-NTFS Gnome VFS module requires glib-2.0 and gnome-vfs-module-2.0 librares.])
+		fi
+	])
+fi
+AM_CONDITIONAL(ENABLE_GNOME_VFS, $compile_gnome_vfs)
 
 # create a working libtool-script
 if test -z "$LIBTOOL"; then
diff --git a/doc/Makefile.in b/doc/Makefile.in
index 2239a60b..49827c8a 100644
--- a/doc/Makefile.in
+++ b/doc/Makefile.in
@@ -72,15 +72,9 @@ AWK = @AWK@
 CC = @CC@
 CFLAGS = @CFLAGS@
 CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 ECHO = @ECHO@
-GLIB_CFLAGS = @GLIB_CFLAGS@
-GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
-GLIB_LIBS = @GLIB_LIBS@
-GLIB_MKENUMS = @GLIB_MKENUMS@
-GOBJECT_QUERY = @GOBJECT_QUERY@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 LDFLAGS = @LDFLAGS@
 LIBNTFS_GNOMEVFS_CFLAGS = @LIBNTFS_GNOMEVFS_CFLAGS@
diff --git a/include/Makefile.in b/include/Makefile.in
index acb19290..a0124660 100644
--- a/include/Makefile.in
+++ b/include/Makefile.in
@@ -72,15 +72,9 @@ AWK = @AWK@
 CC = @CC@
 CFLAGS = @CFLAGS@
 CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 ECHO = @ECHO@
-GLIB_CFLAGS = @GLIB_CFLAGS@
-GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
-GLIB_LIBS = @GLIB_LIBS@
-GLIB_MKENUMS = @GLIB_MKENUMS@
-GOBJECT_QUERY = @GOBJECT_QUERY@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 LDFLAGS = @LDFLAGS@
 LIBNTFS_GNOMEVFS_CFLAGS = @LIBNTFS_GNOMEVFS_CFLAGS@
diff --git a/libntfs/Makefile.am b/libntfs/Makefile.am
index 57bd0ce1..44c53233 100644
--- a/libntfs/Makefile.am
+++ b/libntfs/Makefile.am
@@ -64,9 +64,16 @@ libntfs_la_SOURCES =	\
 	unistr.c	\
 	volume.c
 
+if ENABLE_GNOME_VFS
+
 gnomevfsmoduleslibdir = $(libdir)/gnome-vfs-2.0/modules
 gnomevfsmoduleslib_LTLIBRARIES = libntfs-gnomevfs.la
 
+gnomevfsmodulesconfdir = $(sysconfdir)/gnome-vfs-2.0/modules
+gnomevfsmodulesconf_DATA = libntfs.conf
+
+endif
+
 libntfs_gnomevfs_la_LDFLAGS = -version-info $(LTVERSION_LIBNTFS_GNOMEVFS)
 libntfs_gnomevfs_la_LIBADD = libntfs.la
 libntfs_gnomevfs_la_LIBS = $(LIBNTFS_GNOMEVFS_LIBS)
@@ -75,9 +82,6 @@ libntfs_gnomevfs_la_SOURCES =	\
 	gnome-vfs-method.c	\
 	gnome-vfs-module.c
 
-gnomevfsmodulesconfdir = $(sysconfdir)/gnome-vfs-2.0/modules
-gnomevfsmodulesconf_DATA = libntfs.conf
-
 man_MANS = libntfs-gnomevfs.8
 
 INCLUDES = $(linux_ntfsincludedir) $(all_includes)
diff --git a/libntfs/Makefile.in b/libntfs/Makefile.in
index 9764b46f..38d42da1 100644
--- a/libntfs/Makefile.in
+++ b/libntfs/Makefile.in
@@ -99,15 +99,9 @@ AWK = @AWK@
 CC = @CC@
 CFLAGS = @CFLAGS@
 CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 ECHO = @ECHO@
-GLIB_CFLAGS = @GLIB_CFLAGS@
-GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
-GLIB_LIBS = @GLIB_LIBS@
-GLIB_MKENUMS = @GLIB_MKENUMS@
-GOBJECT_QUERY = @GOBJECT_QUERY@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 LDFLAGS = @LDFLAGS@
 LIBNTFS_GNOMEVFS_CFLAGS = @LIBNTFS_GNOMEVFS_CFLAGS@
@@ -162,8 +156,11 @@ libntfs_la_SOURCES = \
 	volume.c
 
 
-gnomevfsmoduleslibdir = $(libdir)/gnome-vfs-2.0/modules
-gnomevfsmoduleslib_LTLIBRARIES = libntfs-gnomevfs.la
+@ENABLE_GNOME_VFS_TRUE@gnomevfsmoduleslibdir = $(libdir)/gnome-vfs-2.0/modules
+@ENABLE_GNOME_VFS_TRUE@gnomevfsmoduleslib_LTLIBRARIES = libntfs-gnomevfs.la
+
+@ENABLE_GNOME_VFS_TRUE@gnomevfsmodulesconfdir = $(sysconfdir)/gnome-vfs-2.0/modules
+@ENABLE_GNOME_VFS_TRUE@gnomevfsmodulesconf_DATA = libntfs.conf
 
 libntfs_gnomevfs_la_LDFLAGS = -version-info $(LTVERSION_LIBNTFS_GNOMEVFS)
 libntfs_gnomevfs_la_LIBADD = libntfs.la
@@ -174,9 +171,6 @@ libntfs_gnomevfs_la_SOURCES = \
 	gnome-vfs-module.c
 
 
-gnomevfsmodulesconfdir = $(sysconfdir)/gnome-vfs-2.0/modules
-gnomevfsmodulesconf_DATA = libntfs.conf
-
 man_MANS = libntfs-gnomevfs.8
 
 INCLUDES = $(linux_ntfsincludedir) $(all_includes)
diff --git a/ntfsprogs.spec.in b/ntfsprogs.spec.in
index 49ecf01c..7d5d84d8 100644
--- a/ntfsprogs.spec.in
+++ b/ntfsprogs.spec.in
@@ -28,30 +28,10 @@ ntfsresize, and ntfsundelete (for a full list of included utilities see man
 Summary		: NTFS GNOME virtual filesystem module
 Group		: System Environment/Base
 Requires	: ntfsprogs = %{ver}-%{rel}
-Requires	: libbonobo-activation.so.4
-Requires	: libcom_err.so.3
-Requires	: libcrypto.so.4
-Requires	: libdl.so.2
-Requires	: libgconf-2.so.4
-Requires	: libglib-2.0.so.0
-Requires	: libgmodule-2.0.so.0
-Requires	: libgnomevfs-2.so.0
-Requires	: libgobject-2.0.so.0
-Requires	: libgssapi_krb5.so.2
-Requires	: libgthread-2.0.so.0
-Requires	: libk5crypto.so.3
-Requires	: libkrb5.so.3
-Requires	: liblinc.so.1
-Requires	: libm.so.6
-Requires	: libORBit-2.so.0
-Requires	: libpthread.so.0
-Requires	: libpthread.so.0(GLIBC_2.0)
-Requires	: libpthread.so.0(GLIBC_2.2)
-Requires	: libresolv.so.2
-Requires	: librt.so.1
-Requires	: libssl.so.4
-Requires	: libxml2.so.2
-Requires	: libz.so.1
+BuildRequires	: glib2-devel
+Requires	: glib2
+BuildRequires	: gnome-vfs2-devel
+Requires	: gnome-vfs2
 
 
 %description gnomevfs
@@ -73,7 +53,7 @@ with libntfs.
 
 %build
 if [ -n "$LINGUAS" ]; then unset LINGUAS; fi
-%configure
+%configure --enable-gnome-vfs
 make
 
 
diff --git a/ntfsprogs/Makefile.in b/ntfsprogs/Makefile.in
index d78142ed..dc328d15 100644
--- a/ntfsprogs/Makefile.in
+++ b/ntfsprogs/Makefile.in
@@ -72,15 +72,9 @@ AWK = @AWK@
 CC = @CC@
 CFLAGS = @CFLAGS@
 CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 ECHO = @ECHO@
-GLIB_CFLAGS = @GLIB_CFLAGS@
-GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
-GLIB_LIBS = @GLIB_LIBS@
-GLIB_MKENUMS = @GLIB_MKENUMS@
-GOBJECT_QUERY = @GOBJECT_QUERY@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 LDFLAGS = @LDFLAGS@
 LIBNTFS_GNOMEVFS_CFLAGS = @LIBNTFS_GNOMEVFS_CFLAGS@