diff --git a/aclocal.m4 b/aclocal.m4 index 3dc75895..63b1bcbd 100644 --- a/aclocal.m4 +++ b/aclocal.m4 @@ -4512,3 +4512,274 @@ fi AC_MSG_RESULT([$SED]) ]) +# Configure paths for GLIB +# Owen Taylor 1997-2001 + +dnl AM_PATH_GLIB_2_0([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]]) +dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if gmodule, gobject or +dnl gthread is specified in MODULES, pass to pkg-config +dnl +AC_DEFUN(AM_PATH_GLIB_2_0, +[dnl +dnl Get the cflags and libraries from pkg-config +dnl +AC_ARG_ENABLE(glibtest, [ --disable-glibtest do not try to compile and run a test GLIB program], + , enable_glibtest=yes) + + pkg_config_args=glib-2.0 + for module in . $4 + do + case "$module" in + gmodule) + pkg_config_args="$pkg_config_args gmodule-2.0" + ;; + gobject) + pkg_config_args="$pkg_config_args gobject-2.0" + ;; + gthread) + pkg_config_args="$pkg_config_args gthread-2.0" + ;; + esac + done + + AC_PATH_PROG(PKG_CONFIG, pkg-config, no) + + no_glib="" + + if test x$PKG_CONFIG != xno ; then + if $PKG_CONFIG --atleast-pkgconfig-version 0.7 ; then + : + else + echo *** pkg-config too old; version 0.7 or better required. + no_glib=yes + PKG_CONFIG=no + fi + else + no_glib=yes + fi + + min_glib_version=ifelse([$1], ,2.0.0,$1) + AC_MSG_CHECKING(for GLIB - version >= $min_glib_version) + + if test x$PKG_CONFIG != xno ; then + ## don't try to run the test against uninstalled libtool libs + if $PKG_CONFIG --uninstalled $pkg_config_args; then + echo "Will use uninstalled version of GLib found in PKG_CONFIG_PATH" + enable_glibtest=no + fi + + if $PKG_CONFIG --atleast-version $min_glib_version $pkg_config_args; then + : + else + no_glib=yes + fi + fi + + if test x"$no_glib" = x ; then + GLIB_GENMARSHAL=`$PKG_CONFIG --variable=glib_genmarshal glib-2.0` + GOBJECT_QUERY=`$PKG_CONFIG --variable=gobject_query glib-2.0` + GLIB_MKENUMS=`$PKG_CONFIG --variable=glib_mkenums glib-2.0` + + GLIB_CFLAGS=`$PKG_CONFIG --cflags $pkg_config_args` + GLIB_LIBS=`$PKG_CONFIG --libs $pkg_config_args` + glib_config_major_version=`$PKG_CONFIG --modversion glib-2.0 | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` + glib_config_minor_version=`$PKG_CONFIG --modversion glib-2.0 | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` + glib_config_micro_version=`$PKG_CONFIG --modversion glib-2.0 | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` + if test "x$enable_glibtest" = "xyes" ; then + ac_save_CFLAGS="$CFLAGS" + ac_save_LIBS="$LIBS" + CFLAGS="$CFLAGS $GLIB_CFLAGS" + LIBS="$GLIB_LIBS $LIBS" +dnl +dnl Now check if the installed GLIB is sufficiently new. (Also sanity +dnl checks the results of pkg-config to some extent) +dnl + rm -f conf.glibtest + AC_TRY_RUN([ +#include +#include +#include + +int +main () +{ + int major, minor, micro; + char *tmp_version; + + system ("touch conf.glibtest"); + + /* HP/UX 9 (%@#!) writes to sscanf strings */ + tmp_version = g_strdup("$min_glib_version"); + if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { + printf("%s, bad version string\n", "$min_glib_version"); + exit(1); + } + + if ((glib_major_version != $glib_config_major_version) || + (glib_minor_version != $glib_config_minor_version) || + (glib_micro_version != $glib_config_micro_version)) + { + printf("\n*** 'pkg-config --modversion glib-2.0' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", + $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version, + glib_major_version, glib_minor_version, glib_micro_version); + printf ("*** was found! If pkg-config was correct, then it is best\n"); + printf ("*** to remove the old version of GLib. You may also be able to fix the error\n"); + printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); + printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); + printf("*** required on your system.\n"); + printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n"); + printf("*** to point to the correct configuration files\n"); + } + else if ((glib_major_version != GLIB_MAJOR_VERSION) || + (glib_minor_version != GLIB_MINOR_VERSION) || + (glib_micro_version != GLIB_MICRO_VERSION)) + { + printf("*** GLIB header files (version %d.%d.%d) do not match\n", + GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION); + printf("*** library (version %d.%d.%d)\n", + glib_major_version, glib_minor_version, glib_micro_version); + } + else + { + if ((glib_major_version > major) || + ((glib_major_version == major) && (glib_minor_version > minor)) || + ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro))) + { + return 0; + } + else + { + printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n", + glib_major_version, glib_minor_version, glib_micro_version); + printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n", + major, minor, micro); + printf("*** GLIB is always available from ftp://ftp.gtk.org.\n"); + printf("***\n"); + printf("*** If you have already installed a sufficiently new version, this error\n"); + printf("*** probably means that the wrong copy of the pkg-config shell script is\n"); + printf("*** being found. The easiest way to fix this is to remove the old version\n"); + printf("*** of GLIB, but you can also set the PKG_CONFIG environment to point to the\n"); + printf("*** correct copy of pkg-config. (In this case, you will have to\n"); + printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); + printf("*** so that the correct libraries are found at run-time))\n"); + } + } + return 1; +} +],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) + CFLAGS="$ac_save_CFLAGS" + LIBS="$ac_save_LIBS" + fi + fi + if test "x$no_glib" = x ; then + AC_MSG_RESULT(yes (version $glib_config_major_version.$glib_config_minor_version.$glib_config_micro_version)) + ifelse([$2], , :, [$2]) + else + AC_MSG_RESULT(no) + if test "$PKG_CONFIG" = "no" ; then + echo "*** A new enough version of pkg-config was not found." + echo "*** See http://www.freedesktop.org/software/pkgconfig/" + else + if test -f conf.glibtest ; then + : + else + echo "*** Could not run GLIB test program, checking why..." + ac_save_CFLAGS="$CFLAGS" + ac_save_LIBS="$LIBS" + CFLAGS="$CFLAGS $GLIB_CFLAGS" + LIBS="$LIBS $GLIB_LIBS" + AC_TRY_LINK([ +#include +#include +], [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ], + [ echo "*** The test program compiled, but did not run. This usually means" + echo "*** that the run-time linker is not finding GLIB or finding the wrong" + echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your" + echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" + echo "*** to the installed location Also, make sure you have run ldconfig if that" + echo "*** is required on your system" + echo "***" + echo "*** If you have an old version installed, it is best to remove it, although" + echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ], + [ echo "*** The test program failed to compile or link. See the file config.log for the" + echo "*** exact error that occured. This usually means GLIB is incorrectly installed."]) + CFLAGS="$ac_save_CFLAGS" + LIBS="$ac_save_LIBS" + fi + fi + GLIB_CFLAGS="" + GLIB_LIBS="" + GLIB_GENMARSHAL="" + GOBJECT_QUERY="" + GLIB_MKENUMS="" + ifelse([$3], , :, [$3]) + fi + AC_SUBST(GLIB_CFLAGS) + AC_SUBST(GLIB_LIBS) + AC_SUBST(GLIB_GENMARSHAL) + AC_SUBST(GOBJECT_QUERY) + AC_SUBST(GLIB_MKENUMS) + rm -f conf.glibtest +]) + + +dnl PKG_CHECK_MODULES(GSTUFF, gtk+-2.0 >= 1.3 glib = 1.3.4, action-if, action-not) +dnl defines GSTUFF_LIBS, GSTUFF_CFLAGS, see pkg-config man page +dnl also defines GSTUFF_PKG_ERRORS on error +AC_DEFUN(PKG_CHECK_MODULES, [ + succeeded=no + + if test -z "$PKG_CONFIG"; then + AC_PATH_PROG(PKG_CONFIG, pkg-config, no) + fi + + if test "$PKG_CONFIG" = "no" ; then + echo "*** The pkg-config script could not be found. Make sure it is" + echo "*** in your path, or set the PKG_CONFIG environment variable" + echo "*** to the full path to pkg-config." + echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config." + else + PKG_CONFIG_MIN_VERSION=0.9.0 + if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then + AC_MSG_CHECKING(for $2) + + if $PKG_CONFIG --exists "$2" ; then + AC_MSG_RESULT(yes) + succeeded=yes + + AC_MSG_CHECKING($1_CFLAGS) + $1_CFLAGS=`$PKG_CONFIG --cflags "$2"` + AC_MSG_RESULT($$1_CFLAGS) + + AC_MSG_CHECKING($1_LIBS) + $1_LIBS=`$PKG_CONFIG --libs "$2"` + AC_MSG_RESULT($$1_LIBS) + else + $1_CFLAGS="" + $1_LIBS="" + ## If we have a custom action on failure, don't print errors, but + ## do set a variable so people can do so. + $1_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"` + ifelse([$4], ,echo $$1_PKG_ERRORS,) + fi + + AC_SUBST($1_CFLAGS) + AC_SUBST($1_LIBS) + else + echo "*** Your version of pkg-config is too old. You need version $PKG_CONFIG_MIN_VERSION or newer." + echo "*** See http://www.freedesktop.org/software/pkgconfig" + fi + fi + + if test $succeeded = yes; then + ifelse([$3], , :, [$3]) + else + ifelse([$4], , AC_MSG_ERROR([Library requirements ($2) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them.]), [$4]) + fi +]) + + + diff --git a/configure b/configure index cf03ee9b..cfabf75c 100755 --- a/configure +++ b/configure @@ -1,6 +1,6 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.57 for ntfsprogs 1.8.0beta. +# Generated by GNU Autoconf 2.57 for ntfsprogs 1.8.0betaBK. # # Report bugs to . # @@ -427,8 +427,8 @@ SHELL=${CONFIG_SHELL-/bin/sh} # Identity of this package. PACKAGE_NAME='ntfsprogs' PACKAGE_TARNAME='ntfsprogs' -PACKAGE_VERSION='1.8.0beta' -PACKAGE_STRING='ntfsprogs 1.8.0beta' +PACKAGE_VERSION='1.8.0betaBK' +PACKAGE_STRING='ntfsprogs 1.8.0betaBK' PACKAGE_BUGREPORT='linux-ntfs-dev@lists.sourceforge.net' ac_unique_file="config.h.in" @@ -470,7 +470,7 @@ ac_includes_default="\ # include #endif" -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM AWK SET_MAKE MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT DEBUG_TRUE DEBUG_FALSE REALLYSTATIC_TRUE REALLYSTATIC_FALSE CXX CXXFLAGS LDFLAGS CPPFLAGS ac_ct_CXX EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CXXDEPMODE CC CFLAGS ac_ct_CC CCDEPMODE LN_S RANLIB ac_ct_RANLIB ECHO CPP EGREP LIBTOOL LIBTOOL_DEPS all_includes all_libraries AUTODIRS GCC_NEEDS_MS_EXTENSIONS_TRUE GCC_NEEDS_MS_EXTENSIONS_FALSE LIBOBJS LTLIBOBJS' +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM AWK SET_MAKE MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT DEBUG_TRUE DEBUG_FALSE REALLYSTATIC_TRUE REALLYSTATIC_FALSE PKG_CONFIG CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE GLIB_CFLAGS GLIB_LIBS GLIB_GENMARSHAL GOBJECT_QUERY GLIB_MKENUMS CXX CXXFLAGS ac_ct_CXX CXXDEPMODE LN_S RANLIB ac_ct_RANLIB GNOME_VFS_MODULE_CFLAGS GNOME_VFS_MODULE_LIBS ECHO CPP EGREP LIBTOOL LIBTOOL_DEPS all_includes all_libraries AUTODIRS GCC_NEEDS_MS_EXTENSIONS_TRUE GCC_NEEDS_MS_EXTENSIONS_FALSE LIBOBJS LTLIBOBJS' ac_subst_files='' # Initialize some variables set by options. @@ -911,22 +911,6 @@ ac_env_target_alias_set=${target_alias+set} ac_env_target_alias_value=$target_alias ac_cv_env_target_alias_set=${target_alias+set} ac_cv_env_target_alias_value=$target_alias -ac_env_CXX_set=${CXX+set} -ac_env_CXX_value=$CXX -ac_cv_env_CXX_set=${CXX+set} -ac_cv_env_CXX_value=$CXX -ac_env_CXXFLAGS_set=${CXXFLAGS+set} -ac_env_CXXFLAGS_value=$CXXFLAGS -ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set} -ac_cv_env_CXXFLAGS_value=$CXXFLAGS -ac_env_LDFLAGS_set=${LDFLAGS+set} -ac_env_LDFLAGS_value=$LDFLAGS -ac_cv_env_LDFLAGS_set=${LDFLAGS+set} -ac_cv_env_LDFLAGS_value=$LDFLAGS -ac_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_env_CPPFLAGS_value=$CPPFLAGS -ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_cv_env_CPPFLAGS_value=$CPPFLAGS ac_env_CC_set=${CC+set} ac_env_CC_value=$CC ac_cv_env_CC_set=${CC+set} @@ -935,6 +919,22 @@ ac_env_CFLAGS_set=${CFLAGS+set} ac_env_CFLAGS_value=$CFLAGS ac_cv_env_CFLAGS_set=${CFLAGS+set} ac_cv_env_CFLAGS_value=$CFLAGS +ac_env_LDFLAGS_set=${LDFLAGS+set} +ac_env_LDFLAGS_value=$LDFLAGS +ac_cv_env_LDFLAGS_set=${LDFLAGS+set} +ac_cv_env_LDFLAGS_value=$LDFLAGS +ac_env_CPPFLAGS_set=${CPPFLAGS+set} +ac_env_CPPFLAGS_value=$CPPFLAGS +ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} +ac_cv_env_CPPFLAGS_value=$CPPFLAGS +ac_env_CXX_set=${CXX+set} +ac_env_CXX_value=$CXX +ac_cv_env_CXX_set=${CXX+set} +ac_cv_env_CXX_value=$CXX +ac_env_CXXFLAGS_set=${CXXFLAGS+set} +ac_env_CXXFLAGS_value=$CXXFLAGS +ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set} +ac_cv_env_CXXFLAGS_value=$CXXFLAGS ac_env_CPP_set=${CPP+set} ac_env_CPP_value=$CPP ac_cv_env_CPP_set=${CPP+set} @@ -947,7 +947,7 @@ if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures ntfsprogs 1.8.0beta to adapt to many kinds of systems. +\`configure' configures ntfsprogs 1.8.0betaBK to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1014,7 +1014,7 @@ fi if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of ntfsprogs 1.8.0beta:";; + short | recursive ) echo "Configuration of ntfsprogs 1.8.0betaBK:";; esac cat <<\_ACEOF @@ -1023,12 +1023,13 @@ Optional Features: --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-debug enable debugging - --enable-really-static completely static binaries - --disable-dependency-tracking Speeds up one-time builds - --enable-dependency-tracking Do not reject slow dependency extractors --enable-shared=PKGS build shared libraries default=yes --enable-static=PKGS build static libraries default=yes + --enable-debug enable debugging + --enable-really-static completely static binaries + --disable-glibtest do not try to compile and run a test GLIB program + --disable-dependency-tracking Speeds up one-time builds + --enable-dependency-tracking Do not reject slow dependency extractors --enable-fast-install=PKGS optimize for fast installation default=yes --disable-libtool-lock avoid locking (might break parallel builds) @@ -1039,14 +1040,14 @@ Optional Packages: --with-pic try to use only PIC/non-PIC objects default=use both Some influential environment variables: - CXX C++ compiler command - CXXFLAGS C++ compiler flags + CC C compiler command + CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory - CC C compiler command - CFLAGS C compiler flags + CXX C++ compiler command + CXXFLAGS C++ compiler flags CPP C preprocessor Use these variables to override the choices made by `configure' or to help @@ -1115,7 +1116,7 @@ fi test -n "$ac_init_help" && exit 0 if $ac_init_version; then cat <<\_ACEOF -ntfsprogs configure 1.8.0beta +ntfsprogs configure 1.8.0betaBK generated by GNU Autoconf 2.57 Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 @@ -1130,7 +1131,7 @@ cat >&5 <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by ntfsprogs $as_me 1.8.0beta, which was +It was created by ntfsprogs $as_me 1.8.0betaBK, which was generated by GNU Autoconf 2.57. Invocation command line was $ $0 $@ @@ -1809,7 +1810,7 @@ fi # Define the identity of the package. PACKAGE=ntfsprogs - VERSION=1.8.0beta + VERSION=1.8.0betaBK cat >>confdefs.h <<_ACEOF @@ -1935,17 +1936,6 @@ INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" - -# This is required to get past a stupid configure bug when making the rpm. -# Basically it is broken to specify the host as a command line argument to -# configure on its own, i.e. without giving --host=. It is supposed to work -# but doesn't. So this sets host and erases nonopt effectively moving the -# standalone command line option into the --host= form. -if test "x$nonopt" != "xNONE"; then - host="$nonopt" - nonopt="NONE" -fi - echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. @@ -1970,6 +1960,60 @@ fi MAINT=$MAINTAINER_MODE_TRUE +# Check whether --enable-shared or --disable-shared was given. +if test "${enable_shared+set}" = set; then + enableval="$enable_shared" + p=${PACKAGE-default} +case $enableval in +yes) enable_shared=yes ;; +no) enable_shared=no ;; +*) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," + for pkg in $enableval; do + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$ac_save_ifs" + ;; +esac +else + enable_shared=yes +fi; +# Check whether --enable-static or --disable-static was given. +if test "${enable_static+set}" = set; then + enableval="$enable_static" + p=${PACKAGE-default} +case $enableval in +yes) enable_static=yes ;; +no) enable_static=no ;; +*) + enable_static=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," + for pkg in $enableval; do + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$ac_save_ifs" + ;; +esac +else + enable_static=yes +fi; + +# This is required to get past a stupid configure bug when making the rpm. +# Basically it is broken to specify the host as a command line argument to +# configure on its own, i.e. without giving --host=. It is supposed to work +# but doesn't. So this sets host and erases nonopt effectively moving the +# standalone command line option into the --host= form. +if test "x$nonopt" != "xNONE"; then + host="$nonopt" + nonopt="NONE" +fi if test "x$prefix" = "xNONE"; then @@ -2017,6 +2061,1337 @@ else fi +# Do not discard 'CFLAGS' as they may have been passed us by rpmbuild(8) +if test "$USE_MAINTAINER_MODE" = "yes";then + CFLAGS="$CFLAGS -ggdb3 -Wall -Wstrict-prototypes -Wsign-compare" ## FIXME: fix all source: -Wsign-compare +fi + +rm -f .deps 2>/dev/null +mkdir .deps 2>/dev/null +if test -d .deps; then + DEPDIR=.deps +else + # MS-DOS does not allow filenames that begin with a dot. + DEPDIR=_deps +fi +rmdir .deps 2>/dev/null + + + ac_config_commands="$ac_config_commands depfiles" + + +am_make=${MAKE-make} +cat > confinc << 'END' +doit: + @echo done +END +# If we don't find an include directive, just comment out the code. +echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 +echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# We grep out `Entering directory' and `Leaving directory' +# messages which can occur if `w' ends up in MAKEFLAGS. +# In particular we don't look at `^make:' because GNU make might +# be invoked under some other name (usually "gmake"), in which +# case it prints its new name instead of `make'. +if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then + am__include=include + am__quote= + _am_result=GNU +fi +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then + am__include=.include + am__quote="\"" + _am_result=BSD + fi +fi + + +echo "$as_me:$LINENO: result: $_am_result" >&5 +echo "${ECHO_T}$_am_result" >&6 +rm -f confinc confmf + +# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then + enableval="$enable_dependency_tracking" + +fi; +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' +fi + + +if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' +else + AMDEP_TRUE='#' + AMDEP_FALSE= +fi + + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + CC=$ac_ct_CC +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + CC=$ac_ct_CC +else + CC="$ac_cv_prog_CC" +fi + +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$ac_ct_CC" && break +done + + CC=$ac_ct_CC +fi + +fi + + +test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&5 +echo "$as_me: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + +# Provide some information about the compiler. +echo "$as_me:$LINENO:" \ + "checking for C compiler version" >&5 +ac_compiler=`set X $ac_compile; echo $2` +{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 + (eval $ac_compiler --version &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 + (eval $ac_compiler -v &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 + (eval $ac_compiler -V &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +echo "$as_me:$LINENO: checking for C compiler default output" >&5 +echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6 +ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` +if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 + (eval $ac_link_default) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Find the output, starting from the most likely. This scheme is +# not robust to junk in `.', hence go to wildcards (a.*) only as a last +# resort. + +# Be careful to initialize this variable, since it used to be cached. +# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. +ac_cv_exeext= +# b.out is created by i960 compilers. +for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) + ;; + conftest.$ac_ext ) + # This is the source file. + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + # FIXME: I believe we export ac_cv_exeext for Libtool, + # but it would be cool to find out if it's true. Does anybody + # maintain Libtool? --akim. + export ac_cv_exeext + break;; + * ) + break;; + esac +done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: C compiler cannot create executables +See \`config.log' for more details." >&5 +echo "$as_me: error: C compiler cannot create executables +See \`config.log' for more details." >&2;} + { (exit 77); exit 77; }; } +fi + +ac_exeext=$ac_cv_exeext +echo "$as_me:$LINENO: result: $ac_file" >&5 +echo "${ECHO_T}$ac_file" >&6 + +# Check the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 +# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 +# If not cross compiling, check that we can run a simple program. +if test "$cross_compiling" != yes; then + if { ac_try='./$ac_file' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { echo "$as_me:$LINENO: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + fi + fi +fi +echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + +rm -f a.out a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +# Check the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 +echo "$as_me:$LINENO: result: $cross_compiling" >&5 +echo "${ECHO_T}$cross_compiling" >&6 + +echo "$as_me:$LINENO: checking for suffix of executables" >&5 +echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + export ac_cv_exeext + break;; + * ) break;; + esac +done +else + { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +rm -f conftest$ac_cv_exeext +echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +echo "${ECHO_T}$ac_cv_exeext" >&6 + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +echo "$as_me:$LINENO: checking for suffix of object files" >&5 +echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 +if test "${ac_cv_objext+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +echo "${ECHO_T}$ac_cv_objext" >&6 +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 +if test "${ac_cv_c_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_compiler_gnu=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_compiler_gnu=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 +GCC=`test $ac_compiler_gnu = yes && echo yes` +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +CFLAGS="-g" +echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_g=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_prog_cc_g=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 +echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_prog_cc_stdc=no +ac_save_CC=$CC +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#include +#include +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +# Don't try gcc -ansi; that turns off useful extensions and +# breaks some systems' header files. +# AIX -qlanglvl=ansi +# Ultrix and OSF/1 -std1 +# HP-UX 10.20 and later -Ae +# HP-UX older versions -Aa -D_HPUX_SOURCE +# SVR4 -Xc -D__EXTENSIONS__ +for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_stdc=$ac_arg +break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.$ac_objext +done +rm -f conftest.$ac_ext conftest.$ac_objext +CC=$ac_save_CC + +fi + +case "x$ac_cv_prog_cc_stdc" in + x|xno) + echo "$as_me:$LINENO: result: none needed" >&5 +echo "${ECHO_T}none needed" >&6 ;; + *) + echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 + CC="$CC $ac_cv_prog_cc_stdc" ;; +esac + +# Some people use a C++ compiler to compile C. Since we use `exit', +# in C++ we need to declare it. In case someone uses the same compiler +# for both compiling C and C++ we need to have the C++ compiler decide +# the declaration of exit, since it's the most demanding environment. +cat >conftest.$ac_ext <<_ACEOF +#ifndef __cplusplus + choke me +#endif +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + for ac_declaration in \ + ''\ + '#include ' \ + 'extern "C" void std::exit (int) throw (); using std::exit;' \ + 'extern "C" void std::exit (int); using std::exit;' \ + 'extern "C" void exit (int) throw ();' \ + 'extern "C" void exit (int);' \ + 'void exit (int);' +do + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +$ac_declaration +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +continue +fi +rm -f conftest.$ac_objext conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_declaration +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.$ac_objext conftest.$ac_ext +done +rm -f conftest* +if test -n "$ac_declaration"; then + echo '#ifdef __cplusplus' >>confdefs.h + echo $ac_declaration >>confdefs.h + echo '#endif' >>confdefs.h +fi + +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.$ac_objext conftest.$ac_ext +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +depcc="$CC" am_compiler_list= + +echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 +if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + for depmode in $am_compiler_list; do + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + echo '#include "conftest.h"' > conftest.c + echo 'int i;' > conftest.h + echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf + + case $depmode in + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + none) break ;; + esac + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. + if depmode=$depmode \ + source=conftest.c object=conftest.o \ + depfile=conftest.Po tmpdepfile=conftest.TPo \ + $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 && + grep conftest.h conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CC_dependencies_compiler_type=none +fi + +fi +echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 +echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + + +# Check whether --enable-glibtest or --disable-glibtest was given. +if test "${enable_glibtest+set}" = set; then + enableval="$enable_glibtest" + +else + enable_glibtest=yes +fi; + + pkg_config_args=glib-2.0 + for module in . gmodule gobject + do + case "$module" in + gmodule) + pkg_config_args="$pkg_config_args gmodule-2.0" + ;; + gobject) + pkg_config_args="$pkg_config_args gobject-2.0" + ;; + gthread) + pkg_config_args="$pkg_config_args gthread-2.0" + ;; + esac + done + + # Extract the first word of "pkg-config", so it can be a program name with args. +set dummy pkg-config; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_path_PKG_CONFIG+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + case $PKG_CONFIG in + [\\/]* | ?:[\\/]*) + ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_path_PKG_CONFIG" && ac_cv_path_PKG_CONFIG="no" + ;; +esac +fi +PKG_CONFIG=$ac_cv_path_PKG_CONFIG + +if test -n "$PKG_CONFIG"; then + echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5 +echo "${ECHO_T}$PKG_CONFIG" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + + no_glib="" + + if test x$PKG_CONFIG != xno ; then + if $PKG_CONFIG --atleast-pkgconfig-version 0.7 ; then + : + else + echo *** pkg-config too old; version 0.7 or better required. + no_glib=yes + PKG_CONFIG=no + fi + else + no_glib=yes + fi + + min_glib_version=2.0.0 + echo "$as_me:$LINENO: checking for GLIB - version >= $min_glib_version" >&5 +echo $ECHO_N "checking for GLIB - version >= $min_glib_version... $ECHO_C" >&6 + + if test x$PKG_CONFIG != xno ; then + ## don't try to run the test against uninstalled libtool libs + if $PKG_CONFIG --uninstalled $pkg_config_args; then + echo "Will use uninstalled version of GLib found in PKG_CONFIG_PATH" + enable_glibtest=no + fi + + if $PKG_CONFIG --atleast-version $min_glib_version $pkg_config_args; then + : + else + no_glib=yes + fi + fi + + if test x"$no_glib" = x ; then + GLIB_GENMARSHAL=`$PKG_CONFIG --variable=glib_genmarshal glib-2.0` + GOBJECT_QUERY=`$PKG_CONFIG --variable=gobject_query glib-2.0` + GLIB_MKENUMS=`$PKG_CONFIG --variable=glib_mkenums glib-2.0` + + GLIB_CFLAGS=`$PKG_CONFIG --cflags $pkg_config_args` + GLIB_LIBS=`$PKG_CONFIG --libs $pkg_config_args` + glib_config_major_version=`$PKG_CONFIG --modversion glib-2.0 | \ + sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'` + glib_config_minor_version=`$PKG_CONFIG --modversion glib-2.0 | \ + sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'` + glib_config_micro_version=`$PKG_CONFIG --modversion glib-2.0 | \ + sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'` + if test "x$enable_glibtest" = "xyes" ; then + ac_save_CFLAGS="$CFLAGS" + ac_save_LIBS="$LIBS" + CFLAGS="$CFLAGS $GLIB_CFLAGS" + LIBS="$GLIB_LIBS $LIBS" + rm -f conf.glibtest + if test "$cross_compiling" = yes; then + echo $ac_n "cross compiling; assumed OK... $ac_c" +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +#include +#include +#include + +int +main () +{ + int major, minor, micro; + char *tmp_version; + + system ("touch conf.glibtest"); + + /* HP/UX 9 (%@#!) writes to sscanf strings */ + tmp_version = g_strdup("$min_glib_version"); + if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { + printf("%s, bad version string\n", "$min_glib_version"); + exit(1); + } + + if ((glib_major_version != $glib_config_major_version) || + (glib_minor_version != $glib_config_minor_version) || + (glib_micro_version != $glib_config_micro_version)) + { + printf("\n*** 'pkg-config --modversion glib-2.0' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", + $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version, + glib_major_version, glib_minor_version, glib_micro_version); + printf ("*** was found! If pkg-config was correct, then it is best\n"); + printf ("*** to remove the old version of GLib. You may also be able to fix the error\n"); + printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); + printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); + printf("*** required on your system.\n"); + printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n"); + printf("*** to point to the correct configuration files\n"); + } + else if ((glib_major_version != GLIB_MAJOR_VERSION) || + (glib_minor_version != GLIB_MINOR_VERSION) || + (glib_micro_version != GLIB_MICRO_VERSION)) + { + printf("*** GLIB header files (version %d.%d.%d) do not match\n", + GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION); + printf("*** library (version %d.%d.%d)\n", + glib_major_version, glib_minor_version, glib_micro_version); + } + else + { + if ((glib_major_version > major) || + ((glib_major_version == major) && (glib_minor_version > minor)) || + ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro))) + { + return 0; + } + else + { + printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n", + glib_major_version, glib_minor_version, glib_micro_version); + printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n", + major, minor, micro); + printf("*** GLIB is always available from ftp://ftp.gtk.org.\n"); + printf("***\n"); + printf("*** If you have already installed a sufficiently new version, this error\n"); + printf("*** probably means that the wrong copy of the pkg-config shell script is\n"); + printf("*** being found. The easiest way to fix this is to remove the old version\n"); + printf("*** of GLIB, but you can also set the PKG_CONFIG environment to point to the\n"); + printf("*** correct copy of pkg-config. (In this case, you will have to\n"); + printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); + printf("*** so that the correct libraries are found at run-time))\n"); + } + } + return 1; +} + +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +no_glib=yes +fi +rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi + CFLAGS="$ac_save_CFLAGS" + LIBS="$ac_save_LIBS" + fi + fi + if test "x$no_glib" = x ; then + echo "$as_me:$LINENO: result: yes (version $glib_config_major_version.$glib_config_minor_version.$glib_config_micro_version)" >&5 +echo "${ECHO_T}yes (version $glib_config_major_version.$glib_config_minor_version.$glib_config_micro_version)" >&6 + : + else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + if test "$PKG_CONFIG" = "no" ; then + echo "*** A new enough version of pkg-config was not found." + echo "*** See http://www.freedesktop.org/software/pkgconfig/" + else + if test -f conf.glibtest ; then + : + else + echo "*** Could not run GLIB test program, checking why..." + ac_save_CFLAGS="$CFLAGS" + ac_save_LIBS="$LIBS" + CFLAGS="$CFLAGS $GLIB_CFLAGS" + LIBS="$LIBS $GLIB_LIBS" + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +#include +#include + +int +main () +{ + return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + echo "*** The test program compiled, but did not run. This usually means" + echo "*** that the run-time linker is not finding GLIB or finding the wrong" + echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your" + echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" + echo "*** to the installed location Also, make sure you have run ldconfig if that" + echo "*** is required on your system" + echo "***" + echo "*** If you have an old version installed, it is best to remove it, although" + echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + echo "*** The test program failed to compile or link. See the file config.log for the" + echo "*** exact error that occured. This usually means GLIB is incorrectly installed." +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext + CFLAGS="$ac_save_CFLAGS" + LIBS="$ac_save_LIBS" + fi + fi + GLIB_CFLAGS="" + GLIB_LIBS="" + GLIB_GENMARSHAL="" + GOBJECT_QUERY="" + GLIB_MKENUMS="" + { { echo "$as_me:$LINENO: error: Linux-NTFS Gnome VFS module requires glib-2.0 library." >&5 +echo "$as_me: error: Linux-NTFS Gnome VFS module requires glib-2.0 library." >&2;} + { (exit 1); exit 1; }; } + fi + + + + + + rm -f conf.glibtest + +CFLAGS="$CFLAGS $GLIB_CFLAGS" +LIBS="$LIBS $GLIB_LIBS" + # Checks for programs. ac_ext=cc ac_cpp='$CXXCPP $CPPFLAGS' @@ -2131,209 +3506,6 @@ ac_compiler=`set X $ac_compile; echo $2` echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -echo "$as_me:$LINENO: checking for C++ compiler default output" >&5 -echo $ECHO_N "checking for C++ compiler default output... $ECHO_C" >&6 -ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` -if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 - (eval $ac_link_default) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # Find the output, starting from the most likely. This scheme is -# not robust to junk in `.', hence go to wildcards (a.*) only as a last -# resort. - -# Be careful to initialize this variable, since it used to be cached. -# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. -ac_cv_exeext= -# b.out is created by i960 compilers. -for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) - ;; - conftest.$ac_ext ) - # This is the source file. - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - # FIXME: I believe we export ac_cv_exeext for Libtool, - # but it would be cool to find out if it's true. Does anybody - # maintain Libtool? --akim. - export ac_cv_exeext - break;; - * ) - break;; - esac -done -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { echo "$as_me:$LINENO: error: C++ compiler cannot create executables -See \`config.log' for more details." >&5 -echo "$as_me: error: C++ compiler cannot create executables -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; } -fi - -ac_exeext=$ac_cv_exeext -echo "$as_me:$LINENO: result: $ac_file" >&5 -echo "${ECHO_T}$ac_file" >&6 - -# Check the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -echo "$as_me:$LINENO: checking whether the C++ compiler works" >&5 -echo $ECHO_N "checking whether the C++ compiler works... $ECHO_C" >&6 -# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 -# If not cross compiling, check that we can run a simple program. -if test "$cross_compiling" != yes; then - if { ac_try='./$ac_file' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { echo "$as_me:$LINENO: error: cannot run C++ compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot run C++ compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } - fi - fi -fi -echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - -rm -f a.out a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -# Check the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 -echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 -echo "$as_me:$LINENO: result: $cross_compiling" >&5 -echo "${ECHO_T}$cross_compiling" >&6 - -echo "$as_me:$LINENO: checking for suffix of executables" >&5 -echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - export ac_cv_exeext - break;; - * ) break;; - esac -done -else - { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -rm -f conftest$ac_cv_exeext -echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 -echo "${ECHO_T}$ac_cv_exeext" >&6 - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -echo "$as_me:$LINENO: checking for suffix of object files" >&5 -echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 -if test "${ac_cv_objext+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 -echo "${ECHO_T}$ac_cv_objext" >&6 -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6 if test "${ac_cv_cxx_compiler_gnu+set}" = set; then @@ -2540,79 +3712,6 @@ ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu -rm -f .deps 2>/dev/null -mkdir .deps 2>/dev/null -if test -d .deps; then - DEPDIR=.deps -else - # MS-DOS does not allow filenames that begin with a dot. - DEPDIR=_deps -fi -rmdir .deps 2>/dev/null - - - ac_config_commands="$ac_config_commands depfiles" - - -am_make=${MAKE-make} -cat > confinc << 'END' -doit: - @echo done -END -# If we don't find an include directive, just comment out the code. -echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 -echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# We grep out `Entering directory' and `Leaving directory' -# messages which can occur if `w' ends up in MAKEFLAGS. -# In particular we don't look at `^make:' because GNU make might -# be invoked under some other name (usually "gmake"), in which -# case it prints its new name instead of `make'. -if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then - am__include=include - am__quote= - _am_result=GNU -fi -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then - am__include=.include - am__quote="\"" - _am_result=BSD - fi -fi - - -echo "$as_me:$LINENO: result: $_am_result" >&5 -echo "${ECHO_T}$_am_result" >&6 -rm -f confinc confmf - -# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then - enableval="$enable_dependency_tracking" - -fi; -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' -fi - - -if test "x$enable_dependency_tracking" != xno; then - AMDEP_TRUE= - AMDEP_FALSE='#' -else - AMDEP_TRUE='#' - AMDEP_FALSE= -fi - - - depcc="$CXX" am_compiler_list= @@ -3615,6 +4714,107 @@ else fi + + succeeded=no + + if test -z "$PKG_CONFIG"; then + # Extract the first word of "pkg-config", so it can be a program name with args. +set dummy pkg-config; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_path_PKG_CONFIG+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + case $PKG_CONFIG in + [\\/]* | ?:[\\/]*) + ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_path_PKG_CONFIG" && ac_cv_path_PKG_CONFIG="no" + ;; +esac +fi +PKG_CONFIG=$ac_cv_path_PKG_CONFIG + +if test -n "$PKG_CONFIG"; then + echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5 +echo "${ECHO_T}$PKG_CONFIG" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + fi + + if test "$PKG_CONFIG" = "no" ; then + echo "*** The pkg-config script could not be found. Make sure it is" + echo "*** in your path, or set the PKG_CONFIG environment variable" + echo "*** to the full path to pkg-config." + echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config." + else + PKG_CONFIG_MIN_VERSION=0.9.0 + if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then + echo "$as_me:$LINENO: checking for gnome-vfs-module-2.0" >&5 +echo $ECHO_N "checking for gnome-vfs-module-2.0... $ECHO_C" >&6 + + if $PKG_CONFIG --exists "gnome-vfs-module-2.0" ; then + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + succeeded=yes + + echo "$as_me:$LINENO: checking GNOME_VFS_MODULE_CFLAGS" >&5 +echo $ECHO_N "checking GNOME_VFS_MODULE_CFLAGS... $ECHO_C" >&6 + GNOME_VFS_MODULE_CFLAGS=`$PKG_CONFIG --cflags "gnome-vfs-module-2.0"` + echo "$as_me:$LINENO: result: $GNOME_VFS_MODULE_CFLAGS" >&5 +echo "${ECHO_T}$GNOME_VFS_MODULE_CFLAGS" >&6 + + echo "$as_me:$LINENO: checking GNOME_VFS_MODULE_LIBS" >&5 +echo $ECHO_N "checking GNOME_VFS_MODULE_LIBS... $ECHO_C" >&6 + GNOME_VFS_MODULE_LIBS=`$PKG_CONFIG --libs "gnome-vfs-module-2.0"` + echo "$as_me:$LINENO: result: $GNOME_VFS_MODULE_LIBS" >&5 +echo "${ECHO_T}$GNOME_VFS_MODULE_LIBS" >&6 + else + GNOME_VFS_MODULE_CFLAGS="" + GNOME_VFS_MODULE_LIBS="" + ## If we have a custom action on failure, don't print errors, but + ## do set a variable so people can do so. + GNOME_VFS_MODULE_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "gnome-vfs-module-2.0"` + echo $GNOME_VFS_MODULE_PKG_ERRORS + fi + + + + else + echo "*** Your version of pkg-config is too old. You need version $PKG_CONFIG_MIN_VERSION or newer." + echo "*** See http://www.freedesktop.org/software/pkgconfig" + fi + fi + + if test $succeeded = yes; then + : + else + { { echo "$as_me:$LINENO: error: Library requirements (gnome-vfs-module-2.0) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them." >&5 +echo "$as_me: error: Library requirements (gnome-vfs-module-2.0) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them." >&2;} + { (exit 1); exit 1; }; } + fi + +CFLAGS="$CFLAGS $GNOME_VFS_MODULE_CFLAGS" +LIBS="$LIBS $GNOME_VFS_MODULE_LIBS" + # create a working libtool-script if test -z "$LIBTOOL"; then ac_ext=c @@ -3623,51 +4823,7 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu - # Check whether --enable-shared or --disable-shared was given. -if test "${enable_shared+set}" = set; then - enableval="$enable_shared" - p=${PACKAGE-default} -case $enableval in -yes) enable_shared=yes ;; -no) enable_shared=no ;; -*) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac -else - enable_shared=yes -fi; -# Check whether --enable-static or --disable-static was given. -if test "${enable_static+set}" = set; then - enableval="$enable_static" - p=${PACKAGE-default} -case $enableval in -yes) enable_static=yes ;; -no) enable_static=no ;; -*) - enable_static=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac -else - enable_static=yes -fi; -# Check whether --enable-fast-install or --disable-fast-install was given. + # Check whether --enable-fast-install or --disable-fast-install was given. if test "${enable_fast_install+set}" = set; then enableval="$enable_fast_install" p=${PACKAGE-default} @@ -4128,7 +5284,6 @@ deplibs_check_method=$lt_cv_deplibs_check_method - # Check for command to grab the raw symbol name followed by C symbol from nm. echo "$as_me:$LINENO: checking command to parse $NM output" >&5 echo $ECHO_N "checking command to parse $NM output... $ECHO_C" >&6 @@ -5262,7 +6417,7 @@ test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes case $host in *-*-irix6*) # Find out which ABI we are using. - echo '#line 5265 "configure"' > conftest.$ac_ext + echo '#line 6420 "configure"' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? @@ -5791,7 +6946,7 @@ chmod -w . save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -o out/conftest2.$ac_objext" compiler_c_o=no -if { (eval echo configure:5794: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then +if { (eval echo configure:6949: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings if test -s out/conftest.err; then @@ -6975,7 +8130,7 @@ linux-gnu*) libsuff= case "$host_cpu" in x86_64*|s390x*) - echo '#line 6978 "configure"' > conftest.$ac_ext + echo '#line 8133 "configure"' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? @@ -7647,7 +8802,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < conftest.$ac_ext <confcache <<\_ACEOF # This file is a shell script that caches the results of configure @@ -11423,7 +12579,7 @@ _ASBOX } >&5 cat >&5 <<_CSEOF -This file was extended by ntfsprogs $as_me 1.8.0beta, which was +This file was extended by ntfsprogs $as_me 1.8.0betaBK, which was generated by GNU Autoconf 2.57. Invocation command line was CONFIG_FILES = $CONFIG_FILES @@ -11486,7 +12642,7 @@ _ACEOF cat >>$CONFIG_STATUS <<_ACEOF ac_cs_version="\\ -ntfsprogs config.status 1.8.0beta +ntfsprogs config.status 1.8.0betaBK configured by $0, generated by GNU Autoconf 2.57, with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" @@ -11601,6 +12757,7 @@ do "doc/Makefile" ) CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; "include/Makefile" ) CONFIG_FILES="$CONFIG_FILES include/Makefile" ;; "libntfs/Makefile" ) CONFIG_FILES="$CONFIG_FILES libntfs/Makefile" ;; + "libntfs/libntfs.conf" ) CONFIG_FILES="$CONFIG_FILES libntfs/libntfs.conf" ;; "ntfsprogs/Makefile" ) CONFIG_FILES="$CONFIG_FILES ntfsprogs/Makefile" ;; "ntfsprogs/mkntfs.8" ) CONFIG_FILES="$CONFIG_FILES ntfsprogs/mkntfs.8" ;; "ntfsprogs/ntfscat.8" ) CONFIG_FILES="$CONFIG_FILES ntfsprogs/ntfscat.8" ;; @@ -11737,11 +12894,12 @@ s,@DEBUG_TRUE@,$DEBUG_TRUE,;t t s,@DEBUG_FALSE@,$DEBUG_FALSE,;t t s,@REALLYSTATIC_TRUE@,$REALLYSTATIC_TRUE,;t t s,@REALLYSTATIC_FALSE@,$REALLYSTATIC_FALSE,;t t -s,@CXX@,$CXX,;t t -s,@CXXFLAGS@,$CXXFLAGS,;t t +s,@PKG_CONFIG@,$PKG_CONFIG,;t t +s,@CC@,$CC,;t t +s,@CFLAGS@,$CFLAGS,;t t s,@LDFLAGS@,$LDFLAGS,;t t s,@CPPFLAGS@,$CPPFLAGS,;t t -s,@ac_ct_CXX@,$ac_ct_CXX,;t t +s,@ac_ct_CC@,$ac_ct_CC,;t t s,@EXEEXT@,$EXEEXT,;t t s,@OBJEXT@,$OBJEXT,;t t s,@DEPDIR@,$DEPDIR,;t t @@ -11750,14 +12908,21 @@ s,@am__quote@,$am__quote,;t t s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t -s,@CXXDEPMODE@,$CXXDEPMODE,;t t -s,@CC@,$CC,;t t -s,@CFLAGS@,$CFLAGS,;t t -s,@ac_ct_CC@,$ac_ct_CC,;t t s,@CCDEPMODE@,$CCDEPMODE,;t t +s,@GLIB_CFLAGS@,$GLIB_CFLAGS,;t t +s,@GLIB_LIBS@,$GLIB_LIBS,;t t +s,@GLIB_GENMARSHAL@,$GLIB_GENMARSHAL,;t t +s,@GOBJECT_QUERY@,$GOBJECT_QUERY,;t t +s,@GLIB_MKENUMS@,$GLIB_MKENUMS,;t t +s,@CXX@,$CXX,;t t +s,@CXXFLAGS@,$CXXFLAGS,;t t +s,@ac_ct_CXX@,$ac_ct_CXX,;t t +s,@CXXDEPMODE@,$CXXDEPMODE,;t t s,@LN_S@,$LN_S,;t t s,@RANLIB@,$RANLIB,;t t s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t +s,@GNOME_VFS_MODULE_CFLAGS@,$GNOME_VFS_MODULE_CFLAGS,;t t +s,@GNOME_VFS_MODULE_LIBS@,$GNOME_VFS_MODULE_LIBS,;t t s,@ECHO@,$ECHO,;t t s,@CPP@,$CPP,;t t s,@EGREP@,$EGREP,;t t diff --git a/configure.ac b/configure.ac index 3cbf20fa..8767e496 100644 --- a/configure.ac +++ b/configure.ac @@ -1,9 +1,35 @@ +# +# configure.ac - Source file to generate "./configure" to prepare package for +# compilation. +# +# Copyright (c) 2000-2003 Anton Altaparmakov +# Copyright (c) 2003 Jan Kratochvil +# +# This program/include file is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as published +# by the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program/include file is distributed in the hope that it will be +# useful, but WITHOUT ANY WARRANTY; without even the implied warranty +# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program (in the main directory of the Linux-NTFS +# distribution in the file COPYING); if not, write to the Free Software +# Foundation,Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# + AC_PREREQ(2.57) -AC_INIT(ntfsprogs, 1.8.0beta, linux-ntfs-dev@lists.sourceforge.net) +AC_INIT(ntfsprogs, 1.8.0betaBK, linux-ntfs-dev@lists.sourceforge.net) AC_CANONICAL_TARGET([]) AC_CONFIG_SRCDIR([config.h.in]) AM_CONFIG_HEADER([config.h]) AM_INIT_AUTOMAKE +AM_MAINTAINER_MODE +AM_ENABLE_SHARED +AM_ENABLE_STATIC # This is required to get past a stupid configure bug when making the rpm. # Basically it is broken to specify the host as a command line argument to @@ -15,8 +41,6 @@ if test "x$nonopt" != "xNONE"; then nonopt="NONE" fi -AM_MAINTAINER_MODE - AC_PREFIX_DEFAULT(/usr/local) if test "x$prefix" = "xNONE"; then prefix=$ac_default_prefix @@ -37,6 +61,16 @@ AC_ARG_ENABLE(really-static, AM_CONDITIONAL(DEBUG, test "$enable_debug" = yes) AM_CONDITIONAL(REALLYSTATIC, test "$enable_really_static" = yes) +# Do not discard 'CFLAGS' as they may have been passed us by rpmbuild(8) +if test "$USE_MAINTAINER_MODE" = "yes";then + CFLAGS="$CFLAGS -ggdb3 -Wall -Wstrict-prototypes -Wsign-compare" ## FIXME: fix all source: -Wsign-compare +fi + +AM_PATH_GLIB_2_0(,,[AC_MSG_ERROR([Linux-NTFS Gnome VFS module requires glib-2.0 library.])],[gmodule gobject]) +dnl Force glib-2.0 for the whole package +CFLAGS="$CFLAGS $GLIB_CFLAGS" +LIBS="$LIBS $GLIB_LIBS" + # Checks for programs. AC_PROG_CXX AC_PROG_CC @@ -45,6 +79,11 @@ AC_PROG_LN_S AC_PROG_MAKE_SET AC_PROG_RANLIB +PKG_CHECK_MODULES(GNOME_VFS_MODULE,gnome-vfs-module-2.0) +dnl Force gnome-vfs-module-2.0 for the whole package +CFLAGS="$CFLAGS $GNOME_VFS_MODULE_CFLAGS" +LIBS="$LIBS $GNOME_VFS_MODULE_LIBS" + # create a working libtool-script if test -z "$LIBTOOL"; then AC_LANG_PUSH(C) @@ -66,6 +105,7 @@ AC_SUBST(all_libraries) AC_SUBST(CFLAGS) AC_SUBST(CPPFLAGS) AC_SUBST(LDFLAGS) +AC_SUBST(LIBS) AC_SUBST(AUTODIRS) @@ -138,6 +178,7 @@ AC_CONFIG_FILES([ doc/Makefile include/Makefile libntfs/Makefile + libntfs/libntfs.conf ntfsprogs/Makefile ntfsprogs/mkntfs.8 ntfsprogs/ntfscat.8