From a2a03c63b37a3bdb01531607c876d8612b226082 Mon Sep 17 00:00:00 2001 From: "cantab.net!aia21" Date: Fri, 5 Mar 2004 11:04:40 +0000 Subject: [PATCH] Update. (Logical change 1.294) --- COPYING | 6 +- ChangeLog | 3 + INSTALL | 21 ++- aclocal.m4 | 26 --- configure | 2 +- depcomp | 472 ++++++++++++++++++++++++++++++++++++++++++++++++++ install-sh | 149 ++++++++++------ mkinstalldirs | 116 +++++++------ 8 files changed, 654 insertions(+), 141 deletions(-) diff --git a/COPYING b/COPYING index 6b2ef060..593ca947 100644 --- a/COPYING +++ b/COPYING @@ -1,5 +1,5 @@ - NOTE: The GPL below is copyrighted by the Free Software Foundation, + NOTE: The GPL below is copyrighted by the Free Software Foundation, but the instances of code that it refers to (the Linux-NTFS project, including the NTFS library "libntfs", the NTFS utilities "ntfsprogs" and the Linux kernel NTFS driver) are copyrighted by me and others @@ -13,7 +13,7 @@ Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. - 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. @@ -324,7 +324,7 @@ Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: - Gnomovision version 69, Copyright (C) year name of author + Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. diff --git a/ChangeLog b/ChangeLog index ca91d579..82711e5f 100644 --- a/ChangeLog +++ b/ChangeLog @@ -13,6 +13,9 @@ xx/xx/2004 - 1.8.6-WIP the -fms-extensions switch is no longer required. Also, removed the -fms-extensions switch and associated autodetection from ./configure.ac. (Yuval Fledel with small fixes from me) + - Update the build system: autogen.sh now uses autoreconf; run + autoupdate && autoreconf --force and fixup the fallout damage; rename + INCLUDES to AM_CPPFLAGS; add $srcdir to getgccver invocation. 27/02/2004 - 1.8.5 - Springclean of the build process, cleanups, bug fixes - Fixup ntfsinfo a little bit and give its manpage a small update to diff --git a/INSTALL b/INSTALL index 9f879171..e1fb6264 100644 --- a/INSTALL +++ b/INSTALL @@ -1,4 +1,10 @@ -Quick installation +Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software +Foundation, Inc. + + This file is free documentation; the Free Software Foundation gives +unlimited permission to copy, distribute and modify it. + +Quick Installation ================== In most cases it should be sufficient to do: @@ -8,12 +14,14 @@ Quick installation make install The above will compile and install the NTFS library and utility -programs into /usr/local/lib and /usr/local/bin respectively. The man +programs into /usr/local/lib and /usr/local/bin respectively. The man pages will be installed by default in /usr/local/man. Basic Installation ================== + These are generic installation instructions. + The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a `Makefile' in each directory of the package. @@ -80,7 +88,7 @@ for details on some of the pertinent environment variables. by setting variables in the command line or in the environment. Here is an example: - ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix + ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix *Note Defining Variables::, for more details. @@ -149,15 +157,16 @@ Specifying the System Type There may be some features `configure' cannot figure out automatically, but needs to determine by the type of machine the package will run on. Usually, assuming the package is built to be run on the -_same_ atchitectures, `configure' can figure that out, but if it prints +_same_ architectures, `configure' can figure that out, but if it prints a message saying it cannot guess the machine type, give it the `--build=TYPE' option. TYPE can either be a short name for the system type, such as `sun4', or a canonical name which has the form: + CPU-COMPANY-SYSTEM where SYSTEM can have one of these forms: - OS KERNEL-OS + OS KERNEL-OS See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't @@ -214,7 +223,7 @@ operates. `--cache-file=FILE' Enable the cache: use and save the results of the tests in FILE, - traditionally `./config.cache'. FILE defaults to `/dev/null' to + traditionally `config.cache'. FILE defaults to `/dev/null' to disable caching. `--config-cache' diff --git a/aclocal.m4 b/aclocal.m4 index 96590317..f96c0ba9 100644 --- a/aclocal.m4 +++ b/aclocal.m4 @@ -11,32 +11,6 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. -# Like AC_CONFIG_HEADER, but automatically create stamp file. -*- Autoconf -*- - -# Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -AC_PREREQ([2.52]) - -# serial 6 - -# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. -AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) - # Do all the work for Automake. -*- Autoconf -*- # This macro actually does too much some checks are only needed if diff --git a/configure b/configure index d6efe4ea..b824233f 100755 --- a/configure +++ b/configure @@ -18961,7 +18961,7 @@ fi # Check for gcc version being >= 2.96. echo "$as_me:$LINENO: checking version of $_cc" >&5 echo $ECHO_N "checking version of $_cc... $ECHO_C" >&6 -cc_version=`./getgccver $_cc` +cc_version=`$srcdir/getgccver $_cc` cc_major=`echo $cc_version | cut -d'.' -f1` cc_minor=`echo $cc_version | cut -d'.' -f2` if test -z "$cc_version"; then diff --git a/depcomp b/depcomp index e69de29b..aea3d007 100755 --- a/depcomp +++ b/depcomp @@ -0,0 +1,472 @@ +#! /bin/sh + +# depcomp - compile a program generating dependencies as side-effects +# Copyright 1999, 2000 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Alexandre Oliva . + +if test -z "$depmode" || test -z "$source" || test -z "$object"; then + echo "depcomp: Variables source, object and depmode must be set" 1>&2 + exit 1 +fi +# `libtool' can also be set to `yes' or `no'. + +if test -z "$depfile"; then + base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'` + dir=`echo "$object" | sed 's,/.*$,/,'` + if test "$dir" = "$object"; then + dir= + fi + # FIXME: should be _deps on DOS. + depfile="$dir.deps/$base" +fi + +tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} + +rm -f "$tmpdepfile" + +# Some modes work just like other modes, but use different flags. We +# parameterize here, but still list the modes in the big case below, +# to make depend.m4 easier to write. Note that we *cannot* use a case +# here, because this file can only contain one case statement. +if test "$depmode" = hp; then + # HP compiler uses -M and no extra arg. + gccflag=-M + depmode=gcc +fi + +if test "$depmode" = dashXmstdout; then + # This is just like dashmstdout with a different argument. + dashmflag=-xM + depmode=dashmstdout +fi + +case "$depmode" in +gcc3) +## gcc 3 implements dependency tracking that does exactly what +## we want. Yay! Note: for some reason libtool 1.4 doesn't like +## it if -MD -MP comes after the -MF stuff. Hmm. + "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + mv "$tmpdepfile" "$depfile" + ;; + +gcc) +## There are various ways to get dependency output from gcc. Here's +## why we pick this rather obscure method: +## - Don't want to use -MD because we'd like the dependencies to end +## up in a subdir. Having to rename by hand is ugly. +## (We might end up doing this anyway to support other compilers.) +## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like +## -MM, not -M (despite what the docs say). +## - Using -M directly means running the compiler twice (even worse +## than renaming). + if test -z "$gccflag"; then + gccflag=-MD, + fi + "$@" -Wp,"$gccflag$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz +## The second -e expression handles DOS-style file names with drive letters. + sed -e 's/^[^:]*: / /' \ + -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" +## This next piece of magic avoids the `deleted header file' problem. +## The problem is that when a header file which appears in a .P file +## is deleted, the dependency causes make to die (because there is +## typically no way to rebuild the header). We avoid this by adding +## dummy dependencies for each header file. Too bad gcc doesn't do +## this for us directly. + tr ' ' ' +' < "$tmpdepfile" | +## Some versions of gcc put a space before the `:'. On the theory +## that the space means something, we add a space to the output as +## well. +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +sgi) + if test "$libtool" = yes; then + "$@" "-Wp,-MDupdate,$tmpdepfile" + else + "$@" -MDupdate "$tmpdepfile" + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + + if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files + echo "$object : \\" > "$depfile" + + # Clip off the initial element (the dependent). Don't try to be + # clever and replace this with sed code, as IRIX sed won't handle + # lines with more than a fixed number of characters (4096 in + # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; + # the IRIX cc adds comments like `#:fec' to the end of the + # dependency line. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ + tr ' +' ' ' >> $depfile + echo >> $depfile + + # The second pass generates a dummy entry for each header file. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ + >> $depfile + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +aix) + # The C for AIX Compiler uses -M and outputs the dependencies + # in a .u file. This file always lives in the current directory. + # Also, the AIX compiler puts `$object:' at the start of each line; + # $object doesn't have directory information. + stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'` + tmpdepfile="$stripped.u" + outname="$stripped.o" + if test "$libtool" = yes; then + "$@" -Wc,-M + else + "$@" -M + fi + + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + + if test -f "$tmpdepfile"; then + # Each line is of the form `foo.o: dependent.h'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" + sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +icc) + # Intel's C compiler understands `-MD -MF file'. However on + # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c + # ICC 7.0 will fill foo.d with something like + # foo.o: sub/foo.c + # foo.o: sub/foo.h + # which is wrong. We want: + # sub/foo.o: sub/foo.c + # sub/foo.o: sub/foo.h + # sub/foo.c: + # sub/foo.h: + # ICC 7.1 will output + # foo.o: sub/foo.c sub/foo.h + # and will wrap long lines using \ : + # foo.o: sub/foo.c ... \ + # sub/foo.h ... \ + # ... + + "$@" -MD -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + # Each line is of the form `foo.o: dependent.h', + # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process this invocation + # correctly. Breaking it into two sed invocations is a workaround. + sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | + sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +tru64) + # The Tru64 compiler uses -MD to generate dependencies as a side + # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. + # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put + # dependencies in `foo.d' instead, so we check for that too. + # Subdirectories are respected. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + + if test "$libtool" = yes; then + tmpdepfile1="$dir.libs/$base.lo.d" + tmpdepfile2="$dir.libs/$base.d" + "$@" -Wc,-MD + else + tmpdepfile1="$dir$base.o.d" + tmpdepfile2="$dir$base.d" + "$@" -MD + fi + + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" + exit $stat + fi + + if test -f "$tmpdepfile1"; then + tmpdepfile="$tmpdepfile1" + else + tmpdepfile="$tmpdepfile2" + fi + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + # That's a space and a tab in the []. + sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +#nosideeffect) + # This comment above is used by automake to tell side-effect + # dependency tracking mechanisms from slower ones. + +dashmstdout) + # Important note: in order to support this mode, a compiler *must* + # always write the proprocessed file to stdout, regardless of -o. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + test -z "$dashmflag" && dashmflag=-M + # Require at least two characters before searching for `:' + # in the target name. This is to cope with DOS-style filenames: + # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. + "$@" $dashmflag | + sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + tr ' ' ' +' < "$tmpdepfile" | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +dashXmstdout) + # This case only exists to satisfy depend.m4. It is never actually + # run, as this mode is specially recognized in the preamble. + exit 1 + ;; + +makedepend) + "$@" || exit $? + # Remove any Libtool call + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + # X makedepend + shift + cleared=no + for arg in "$@"; do + case $cleared in + no) + set ""; shift + cleared=yes ;; + esac + case "$arg" in + -D*|-I*) + set fnord "$@" "$arg"; shift ;; + # Strip any option that makedepend may not understand. Remove + # the object too, otherwise makedepend will parse it as a source file. + -*|$object) + ;; + *) + set fnord "$@" "$arg"; shift ;; + esac + done + obj_suffix="`echo $object | sed 's/^.*\././'`" + touch "$tmpdepfile" + ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + sed '1,2d' "$tmpdepfile" | tr ' ' ' +' | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" "$tmpdepfile".bak + ;; + +cpp) + # Important note: in order to support this mode, a compiler *must* + # always write the proprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + "$@" -E | + sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | + sed '$ s: \\$::' > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + cat < "$tmpdepfile" >> "$depfile" + sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvisualcpp) + # Important note: in order to support this mode, a compiler *must* + # always write the proprocessed file to stdout, regardless of -o, + # because we must use -o when running libtool. + "$@" || exit $? + IFS=" " + for arg + do + case "$arg" in + "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") + set fnord "$@" + shift + shift + ;; + *) + set fnord "$@" "$arg" + shift + shift + ;; + esac + done + "$@" -E | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" + echo " " >> "$depfile" + . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +none) + exec "$@" + ;; + +*) + echo "Unknown depmode $depmode" 1>&2 + exit 1 + ;; +esac + +exit 0 diff --git a/install-sh b/install-sh index 11870f1b..6ce63b9f 100755 --- a/install-sh +++ b/install-sh @@ -1,19 +1,37 @@ #!/bin/sh # # install - install a program, script, or datafile -# This comes from X11R5 (mit/util/scripts/install.sh). # -# Copyright 1991 by the Massachusetts Institute of Technology +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. # -# Permission to use, copy, modify, distribute, and sell this software and its -# documentation for any purpose is hereby granted without fee, provided that -# the above copyright notice appear in all copies and that both that -# copyright notice and this permission notice appear in supporting -# documentation, and that the name of M.I.T. not be used in advertising or -# publicity pertaining to distribution of the software without specific, -# written prior permission. M.I.T. makes no representations about the -# suitability of this software for any purpose. It is provided "as is" -# without express or implied warranty. +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent # `make' implicit rules from creating a file called install from it @@ -56,7 +74,7 @@ dir_arg="" while [ x"$1" != x ]; do case $1 in - -c) instcmd="$cpprog" + -c) instcmd=$cpprog shift continue;; @@ -79,7 +97,7 @@ while [ x"$1" != x ]; do shift continue;; - -s) stripcmd="$stripprog" + -s) stripcmd=$stripprog shift continue;; @@ -106,7 +124,7 @@ done if [ x"$src" = x ] then - echo "install: no input file specified" + echo "$0: no input file specified" >&2 exit 1 else : @@ -115,8 +133,8 @@ fi if [ x"$dir_arg" != x ]; then dst=$src src="" - - if [ -d $dst ]; then + + if [ -d "$dst" ]; then instcmd=: chmodcmd="" else @@ -125,20 +143,20 @@ if [ x"$dir_arg" != x ]; then else # Waiting for this to be detected by the "$instcmd $src $dsttmp" command -# might cause directories to be created, which would be especially bad +# might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if [ -f "$src" ] || [ -d "$src" ] then : else - echo "install: $src does not exist" + echo "$0: $src does not exist" >&2 exit 1 fi - + if [ x"$dst" = x ] then - echo "install: no destination specified" + echo "$0: no destination specified" >&2 exit 1 else : @@ -147,16 +165,16 @@ else # If destination is a directory, append the input filename; if your system # does not like double slashes in filenames, you may need to add some logic - if [ -d $dst ] + if [ -d "$dst" ] then - dst="$dst"/`basename $src` + dst=$dst/`basename "$src"` else : fi fi ## this sed command emulates the dirname command -dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` +dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` # Make sure that the destination directory exists. # this part is taken from Noah Friedman's mkinstalldirs script @@ -165,69 +183,73 @@ dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` if [ ! -d "$dstdir" ]; then defaultIFS=' ' -IFS="${IFS-${defaultIFS}}" +IFS="${IFS-$defaultIFS}" -oIFS="${IFS}" +oIFS=$IFS # Some sh's can't handle IFS=/ for some reason. IFS='%' -set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` -IFS="${oIFS}" +set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` +IFS=$oIFS pathcomp='' while [ $# -ne 0 ] ; do - pathcomp="${pathcomp}${1}" + pathcomp=$pathcomp$1 shift - if [ ! -d "${pathcomp}" ] ; + if [ ! -d "$pathcomp" ] ; then - $mkdirprog "${pathcomp}" + $mkdirprog "$pathcomp" else : fi - pathcomp="${pathcomp}/" + pathcomp=$pathcomp/ done fi if [ x"$dir_arg" != x ] then - $doit $instcmd $dst && + $doit $instcmd "$dst" && - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else : ; fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else : ; fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else : ; fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else : ; fi + if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi else # If we're going to rename the final executable, determine the name now. - if [ x"$transformarg" = x ] + if [ x"$transformarg" = x ] then - dstfile=`basename $dst` + dstfile=`basename "$dst"` else - dstfile=`basename $dst $transformbasename | + dstfile=`basename "$dst" $transformbasename | sed $transformarg`$transformbasename fi # don't allow the sed command to completely eliminate the filename - if [ x"$dstfile" = x ] + if [ x"$dstfile" = x ] then - dstfile=`basename $dst` + dstfile=`basename "$dst"` else : fi -# Make a temp file name in the proper directory. +# Make a couple of temp file names in the proper directory. - dsttmp=$dstdir/#inst.$$# + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + +# Trap to clean up temp files at exit. + + trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0 + trap '(exit $?); exit' 1 2 13 15 # Move or copy the file name to the temp name - $doit $instcmd $src $dsttmp && - - trap "rm -f ${dsttmp}" 0 && + $doit $instcmd "$src" "$dsttmp" && # and set any options; do chmod last to preserve setuid bits @@ -235,17 +257,38 @@ else # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $instcmd $src $dsttmp" command. - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else :;fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else :;fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else :;fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else :;fi && + if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi && + +# Now remove or move aside any old file at destination location. We try this +# two ways since rm can't unlink itself on some systems and the destination +# file might be busy for other reasons. In this case, the final cleanup +# might fail but the new file should still install successfully. + +{ + if [ -f "$dstdir/$dstfile" ] + then + $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null || + $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null || + { + echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 + (exit 1); exit + } + else + : + fi +} && # Now rename the file to the real destination. - $doit $rmcmd -f $dstdir/$dstfile && - $doit $mvcmd $dsttmp $dstdir/$dstfile + $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" fi && +# The final little trick to "correctly" pass the exit status to the exit trap. -exit 0 +{ + (exit 0); exit +} diff --git a/mkinstalldirs b/mkinstalldirs index 8ab885ec..d2d5f21b 100755 --- a/mkinstalldirs +++ b/mkinstalldirs @@ -12,18 +12,29 @@ Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..." # process command line arguments while test $# -gt 0 ; do - case "${1}" in - -h | --help | --h* ) # -h for help - echo "${usage}" 1>&2; exit 0 ;; - -m ) # -m PERM arg - shift - test $# -eq 0 && { echo "${usage}" 1>&2; exit 1; } - dirmode="${1}" - shift ;; - -- ) shift; break ;; # stop option processing - -* ) echo "${usage}" 1>&2; exit 1 ;; # unknown option - * ) break ;; # first non-opt arg - esac + case $1 in + -h | --help | --h*) # -h for help + echo "$usage" 1>&2 + exit 0 + ;; + -m) # -m PERM arg + shift + test $# -eq 0 && { echo "$usage" 1>&2; exit 1; } + dirmode=$1 + shift + ;; + --) # stop option processing + shift + break + ;; + -*) # unknown option + echo "$usage" 1>&2 + exit 1 + ;; + *) # first non-opt arg + break + ;; + esac done for file @@ -36,64 +47,65 @@ do done case $# in -0) exit 0 ;; + 0) exit 0 ;; esac case $dirmode in -'') - if mkdir -p -- . 2>/dev/null; then - echo "mkdir -p -- $*" - exec mkdir -p -- "$@" - fi ;; -*) - if mkdir -m "$dirmode" -p -- . 2>/dev/null; then - echo "mkdir -m $dirmode -p -- $*" - exec mkdir -m "$dirmode" -p -- "$@" - fi ;; + '') + if mkdir -p -- . 2>/dev/null; then + echo "mkdir -p -- $*" + exec mkdir -p -- "$@" + fi + ;; + *) + if mkdir -m "$dirmode" -p -- . 2>/dev/null; then + echo "mkdir -m $dirmode -p -- $*" + exec mkdir -m "$dirmode" -p -- "$@" + fi + ;; esac for file do - set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` - shift + set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` + shift - pathcomp= - for d - do - pathcomp="$pathcomp$d" - case "$pathcomp" in - -* ) pathcomp=./$pathcomp ;; - esac + pathcomp= + for d + do + pathcomp="$pathcomp$d" + case $pathcomp in + -*) pathcomp=./$pathcomp ;; + esac - if test ! -d "$pathcomp"; then - echo "mkdir $pathcomp" + if test ! -d "$pathcomp"; then + echo "mkdir $pathcomp" - mkdir "$pathcomp" || lasterr=$? + mkdir "$pathcomp" || lasterr=$? - if test ! -d "$pathcomp"; then - errstatus=$lasterr - else - if test ! -z "$dirmode"; then - echo "chmod $dirmode $pathcomp" + if test ! -d "$pathcomp"; then + errstatus=$lasterr + else + if test ! -z "$dirmode"; then + echo "chmod $dirmode $pathcomp" + lasterr="" + chmod "$dirmode" "$pathcomp" || lasterr=$? - lasterr="" - chmod "$dirmode" "$pathcomp" || lasterr=$? + if test ! -z "$lasterr"; then + errstatus=$lasterr + fi + fi + fi + fi - if test ! -z "$lasterr"; then - errstatus=$lasterr - fi - fi - fi - fi - - pathcomp="$pathcomp/" - done + pathcomp="$pathcomp/" + done done exit $errstatus # Local Variables: # mode: shell-script -# sh-indentation: 3 +# sh-indentation: 2 # End: # mkinstalldirs ends here