Allow objects to support both streaming and block device protocols, by
starting streaming data only when the data transfer window opens.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This allows older versions of ELTORITO.SYS (such as the version found
on the FreeDOS installation CD-ROM) to use iPXE's emulated CD-ROM
drive.
Reported-by: Robin Smidsrød <robin@smidsrod.no>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Expose the multiple-SAN-drive capability of the iPXE core via the iPXE
command line by adding commands to hook and unhook additional drives.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
We currently use INT 13,00 as an opportunity to reopen the underlying
block device, which works well for callers such as DOS that will use
INT 13,00 in response to any disk errors. However, some callers (such
as Windows Server 2008) do not attempt to reset the disk, and so any
failures become effectively permanent.
Fix this by automatically reopening the underlying block device
whenever we might want to access it.
This makes direct installation of Windows to an iSCSI target much more
reliable.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Merge the "bus" and "devfn" fields into a single "busdevfn" field, to
match the format used by the majority of external code.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Remove the concept of shutdown exit flags, and replace it with a
counter used to keep track of exposed interfaces that require devices
to remain active.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The disk signature is used by some OSes (notably Windows) to identify
the boot disk, so it's useful debugging information to have.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Support the extensions mandated by EDD 4.0, including:
o the ability to specify a flat physical address in a disk address
packet,
o the ability to specify a sector count greater than 127 in a disk
address packet,
o support for all functions within the Fixed Disk Access and EDD
Support subsets,
o the ability to describe a device using EDD Device Path Information.
This implementation is based on draft revision 3 of the EDD 4.0
specification, with reference to the EDD 3.0 specification. It is
possible that this implementation may need to change in order to
conform to the final published EDD 4.0 specification.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The block device interface used in gPXE predates the invention of even
the old gPXE data-transfer interface, let alone the current iPXE
generic asynchronous interface mechanism. Bring this old code up to
date, with the following benefits:
o Block device commands can be cancelled by the requestor. The INT 13
layer uses this to provide a global timeout on all INT 13 calls,
with the result that an unexpected passive failure mode (such as
an iSCSI target ACKing the request but never sending a response)
will lead to a timeout that gets reported back to the INT 13 user,
rather than simply freezing the system.
o INT 13,00 (reset drive) is now able to reset the underlying block
device. INT 13 users, such as DOS, that use INT 13,00 as a method
for error recovery now have a chance of recovering.
o All block device commands are tagged, with a numerical tag that
will show up in debugging output and in packet captures; this will
allow easier interpretation of bug reports that include both
sources of information.
o The extremely ugly hacks used to generate the boot firmware tables
have been eradicated and replaced with a generic acpi_describe()
method (exploiting the ability of iPXE interfaces to pass through
methods to an underlying interface). The ACPI tables are now
built in a shared data block within .bss16, rather than each
requiring dedicated space in .data16.
o The architecture-independent concept of a SAN device has been
exposed to the iPXE core through the sanboot API, which provides
calls to hook, unhook, boot, and describe SAN devices. This
allows for much more flexible usage patterns (such as hooking an
empty SAN device and then running an OS installer via TFTP).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
pcbios specific get_memmap() is used by the b44 driver making
all-drivers builds fail on other platforms. Move it to the I/O API
group and provide a dummy implementation on EFI.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Access to the gpxe.org and etherboot.org domains and associated
resources has been revoked by the registrant of the domain. Work
around this problem by renaming project from gPXE to iPXE, and
updating URLs to match.
Also update README, LOG and COPYRIGHTS to remove obsolete information.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When the "keep-san" option is used, the function is exited without
unregistering the stack allocated int13h drive. To prevent a dangling
pointer to the stack, these structs should be heap allocated.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Marty Connor <mdc@etherboot.org>
Some BIOSes (observed with an AMI BIOS on a SunFire X2200) seem to
reset the BIOS drive counter at 40:75 after a failed boot attempt.
This causes problems when attempting a Windows direct-to-iSCSI
installation: bootmgr.exe calls INT 13,0800 and gets told that there
are no hard disks, so never bothers to read the MBR in order to obtain
the boot disk signature. The Windows iSCSI initiator will detect the
iBFT and connect to the target, and everything will appear to work
except for the error message "This computer's hardware may not support
booting to this disk. Ensure that the disk's controller is enabled in
the computer's BIOS menu."
Fix by checking the BIOS drive counter on every INT 13 call, and
updating it whenever necessary.
The case of an unsupported SAN protocol will currently not result in
any error message. Fix by printing the error message at the top level
using strerror(), rather than using hard-coded error messages in the
error paths.
The SRP Boot Firmware Table serves a similar role to the iSCSI and AoE
Boot Firmware Tables; it provides information required by the loaded
OS in order to establish a connection back to the SRP boot device.
SRP is the SCSI RDMA Protocol. It allows for a method of SAN booting
whereby the target is responsible for reading and writing data using
Remote DMA directly to the initiator's memory. The software initiator
merely sends and receives SCSI commands; it never has to touch the
actual data.
Avoid passing credentials in the iBFT that were available but not
required for login. This works around a problem in the Microsoft
iSCSI initiator, which will refuse to initiate sessions if the CHAP
password is fewer than 12 characters, even if the target ends up not
asking for CHAP authentication.
If it happens that _textdata_memsz ends up being an exact multiple of
4kB, then this will cause the .textdata section (after relocation) to
start on a page boundary. This means that the hidden memory region
(which is rounded down to the nearest page boundary) will start
exactly at virtual address 0, i.e. UNULL. This means that
init_eheap() will erroneously assume that it has failed to allocate a
an external heap, since it typically ends up choosing the area that
lies immediately below .textdata, which in this case will be the
region with top==UNULL.
A subsequent error is that memtop_urealloc() passes through the error
return status -ENOMEM to the caller, which (rightly) assumes that the
result represents a valid userptr_t address.
Fixed by using alternative tests for heap non-existence, and by
returning UNULL in case of an error from init_eheap().
EFI provides a copy of the SMBIOS table accessible via the EFI system
table, which we should use instead of manually scanning through the
F000:0000 segment.
Remove the assortment of miscellaneous hacks to guess the "network
boot device", and replace them each with a call to last_opened_netdev().
It still isn't guaranteed correct, but it won't be any worse than
before, and it will at least be consistent.
Code paths that automatically allocate memory from the FBMS at 40:13
should also free it, if possible.
Freeing this memory will not be possible if either
1. The FBMS has been modified since our allocation, or
2. We have not been able to unhook one or more BIOS interrupt vectors.
Shifting all INT13 drive numbers causes problems on systems that use a
sparse drive number space (e.g. qemu BIOS, which uses 0xe0 for the CD-ROM
drive).
The strategy now is:
Each drive is assigned a "natural" drive number, being the next
available drive number in the system (based on the BIOS drive count).
Each drive is accessed using its specified drive number. If the
specified drive number is -1, the natural drive number will be used.
Accesses to the specified drive number will be delivered to the
emulated drive, masking out any preexisting drive using this number.
Accesses to the natural drive number, if different, will be remapped to
the masked-out drive.
The overall upshot is that, for examples:
System has no drives. Emulated INT13 drive gets natural number 0x80
and specified number 0x80. Accesses to drive 0x80 go to the emulated
drive, and there is no remapping.
System has one drive. Emulated INT13 drive gets natural number 0x81
and specified number 0x80. Accesses to drive 0x80 go to the emulated
drive. Accesses to drive 0x81 get remapped to the original drive 0x80.
Michael Brown
Piotr Jaroszyński
Stefan Hajnoczi
Michael Brown
Laurent Vivier