Commit Graph

326 Commits (7137c20ed1f486f31047a3a3dc77d90d0a5bb7dc)

Author SHA1 Message Date
Michael Brown 4c418d2100 Use net_device_operations structure and netdev_nullify() to allow for
safe dropping of the netdev ref by the driver while other refs still
exist.

Add netdev_irq() method.  Net device open()/close() methods should no
longer enable or disable IRQs.

Remove rx_quota; it wasn't used anywhere and added too much complexity
to implementing correct interrupt-masking behaviour in pxe_undi.c.
2007-07-07 16:43:39 +01:00
Michael Brown 2823688a92 Revert "Replace natsemi driver with Indolent's updated one that uses the gPXE API"
This reverts commit 3487640397.
2007-07-07 16:40:58 +01:00
Michael Brown 627feee265 Merge branch 'zalloc' 2007-07-07 04:01:52 +01:00
Michael Brown 436adb2890 Revert "convert to zalloc"
This reverts commit 68add6e814.
2007-07-07 03:59:37 +01:00
Holger Lubitz 85e04b5837 Revert "convert to zalloc"
This reverts commit a4bea78974.
2007-07-07 01:56:37 +02:00
Holger Lubitz e3c72a3438 Revert "convert to zalloc"
This reverts commit 3414fd8df8.
2007-07-07 01:56:27 +02:00
Holger Lubitz ac323c5e4d Revert "convert to zalloc"
This reverts commit 636bd2cd0a.
2007-07-07 01:56:15 +02:00
Holger Lubitz 50fe2159d5 Revert "convert to zalloc"
This reverts commit 7297f04481.
2007-07-07 01:55:45 +02:00
Holger Lubitz a772dc4a2a Revert "convert to zalloc"
This reverts commit 5ce16b03a1.
2007-07-07 01:55:23 +02:00
Holger Lubitz 68add6e814 convert to zalloc 2007-07-06 20:42:05 +02:00
Holger Lubitz 5ce16b03a1 convert to zalloc 2007-07-06 20:42:05 +02:00
Holger Lubitz 7297f04481 convert to zalloc 2007-07-06 20:42:05 +02:00
Holger Lubitz 636bd2cd0a convert to zalloc 2007-07-06 20:42:05 +02:00
Holger Lubitz 3414fd8df8 convert to zalloc 2007-07-06 20:42:05 +02:00
Holger Lubitz a4bea78974 convert to zalloc 2007-07-06 20:42:05 +02:00
Michael Brown ed7eae6005 Use netdev_rx_err() to report receive errors. 2007-07-05 17:23:03 +01:00
Marty Connor 3487640397 Replace natsemi driver with Indolent's updated one that uses the gPXE API
This version uses the gPXE driver API rather than the legacy wrapper API.
2007-07-05 08:54:12 -04:00
Marty Connor 1069a74d20 Warnings purge for via-velocity.[ch] 2007-07-04 21:58:28 -04:00
Marty Connor 8d39559192 Update warnings in depca.c ns8390.c 2007-07-04 20:14:10 -04:00
Marty Connor 13016297ed Purge warnings from tg3.c 2007-07-04 19:49:46 -04:00
Marty Connor e5950283ec Purge warnings from prism2 drivers 2007-07-04 19:47:01 -04:00
Marty Connor 1af1668c95 Warnings purge of drivers (continued) 2007-07-04 05:52:56 -04:00
Michael Brown b5311c2c88 This comment is no longer relevant. 2007-07-03 20:39:47 +01:00
Michael Brown 0924cf678e Implemented (untested) PXENV_START_UNDI. 2007-07-03 18:17:14 +01:00
Michael Brown ca4bd3e24e Kill off now-redundant _irq() methods. 2007-07-03 15:37:56 +01:00
Michael Brown e436b993a9 Avoid double free on I/O buffer when rtl_transmit() returns failure.
Convert printf() to DBG(); printf() is not allowed in drivers.
2007-07-03 14:44:33 +01:00
Michael Brown 71f500ff1b Enable/disable interrupts in driver open/close. 2007-07-03 12:50:58 +01:00
Michael Brown 290280f90e Enable/disable interrupts at open/close time. 2007-07-03 03:34:08 +01:00
Michael Brown a2a0c2eace Enable/disable interrupts on open/close. 2007-07-03 00:57:04 +01:00
Michael Brown 5f17089b14 pxe_netdev now holds a reference to the network device.
Use generic fields in struct device_description rather than assuming
that the struct device * is contained within a pci_device or
isapnp_device; this assumption is broken when using the undionly
driver.

Add PXENV_UNDI_SET_STATION_ADDRESS.
2007-07-02 17:43:32 +01:00
Michael Brown 95cb7aaacf Support cards such as natsemi which treat the data as little-endian
(i.e. LSB transmitted first on the wire), even though SPI commands and
addresses always have to be big-endian.
2007-07-01 15:22:12 +01:00
Michael Brown 31fe5b9415 Hack together far enough to support ne2k-pci. 2007-07-01 00:37:29 +01:00
Michael Brown f33bbd4112 How has the legacy wrapper been working for the past month or so...? 2007-07-01 00:36:48 +01:00
Michael Brown f77815f2b1 Kill off hotplug.h and just make net devices normal reference-counted
structures.

DHCP still broken and #if 0'd out.
2007-06-27 14:48:31 +01:00
Michael Brown 0316eaf85d Add missing call to free_iob(). 2007-06-10 18:33:42 +01:00
Marty Connor f97e642d17 Update email addresses in drivers 2007-06-09 15:23:17 -04:00
Marty Connor 8c25ea0970 Updated email mdc's email address 2007-06-08 11:23:26 -04:00
Michael Brown 3e2c6b6736 pkbuff->iobuf changeover
Achieved via Perl using:

perl -pi -e 's/pk_buff/io_buffer/g; s/Packet buffer/I\/O buffer/ig; ' \
	-e 's/pkbuff\.h/iobuf.h/g; s/pkb_/iob_/g; s/_pkb/_iob/g; ' \
	-e 's/pkb/iobuf/g; s/PKB/IOB/g;'
2007-05-19 18:39:40 +00:00
James Harper 80cc27cbc4 Ported bnx2 driver from Etherboot 5.4. 2007-03-13 23:03:50 +00:00
Michael Brown 13137a4d61 t5x9 code relies on nic->ioaddr being set 2007-03-11 00:37:46 +00:00
Michael Brown 62548c9f0d Updated 3c509 to current device model 2007-03-10 22:28:22 +00:00
Michael Brown 520d9c36af Updated ISAPnP, EISA, MCA and ISA buses to current device model.
ISA 3c509 is currently non-functional, although the EISA (3c509-eisa) and
MCA (3c529) variants should build OK.

None of this code is yet tested.
2007-03-10 18:08:33 +00:00
Michael Brown c63af1ea14 Remove no-longer-used variable 2007-02-19 17:31:20 +00:00
James Harper e1735d5fc2 Fix some bad pointer arithmatic in the tg3 driver that was causing the dynamic memory pool to be corrupted (or worse) 2007-02-10 00:28:41 +00:00
James Harper 1c971f1234 Fix padding problem - from Michael 2007-02-10 00:27:46 +00:00
Michael Brown 2cf1e33df1 Split bootsector execution code out into bootsector.c.
Added basic El Torito ISO image boot capability
2007-01-29 04:21:38 +00:00
Michael Brown 73b09ecba6 Use stdio.h instead of vsprintf.h 2007-01-19 01:13:12 +00:00
Michael Brown 5ff23aa406 Include stdlib.h rather than malloc.h 2007-01-18 20:06:03 +00:00
Michael Brown 48fe701716 Respect the RX quota. This improves poll time by about 0.7us when the
quota is 1.
2007-01-18 12:34:12 +00:00
Michael Brown ff8528ea9a Create and use async_block() macro; it cuts down on the visual overhead
of blocking on asynchronous operations, when that isn't an important
aspect of the code.
2007-01-16 08:10:54 +00:00