Expansion of the (admittedly perverse) "aaa}bbb${ccc" will currently
fail because expand_command() does not check that the closing "}"
occurs later than the opening "${".
Fix by ensuring that the most recent opening "${" is used to match
against the first *subsequent* closing "}".
Total cost of this change: -12 bytes, bringing the overall cost of
this feature to -4 bytes.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Expansion of ${${foo}} will currently fail, because the first
opening "${" will be incorrectly matched against the first closing
"}", leading to an attempt to expand the variable "${foo".
Fix by ensuring that the most recent opening "${" is used to match
against the first closing "}".
Total cost: 8 bytes. :)
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow "set <variable>" to be used to set the variable to an empty
value, if permitted by the setting type. Note that some settings
backends do not differentiate between an empty value and a
non-existent value, so this may or may not be equivalent to "clear
<variable>".
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow "autoboot" to accept an optional list of network devices, and
remove the "netboot" command. This saves around 130 bytes.
The "netboot" command has existed for approximately 48 hours, so its
removal should not cause backwards compatibility issues for anyone.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The "isset" command can be used to determine whether or not a setting
is present. For example:
isset ${net0/ip} || dhcp net0 # If we have no IP address, try DHCP
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow script labels to be defined using the syntax
:<labelname>
(nothing else allowed on the line, including whitespace). Labels are
ignored during script execution, but can be used as the target of the
"goto" command. For example:
#!ipxe
goto machine_${net0/ip} || goto machine_default
# Linux kernel boot
:machine_10.0.0.101
:machine_10.0.0.102
set filename http://my.boot.server/vmlinuz
goto done
# Default configuration
:machine_default
set filename pxelinux.0
goto done
# Boot selected configuration
:done
chain ${filename}
Originally-implemented-by: Shao Miller <shao.miller@yrdsb.edu.on.ca>
Originally-implemented-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Make the "||" and "&&" operators available within iPXE commands. For
example:
dhcp net0 || set net0/ip 192.168.0.2
would attempt to acquire an IP address via DHCP, falling back to a
static address if DHCP fails.
As a side-effect, comments may now be appended to any line. For
example:
dhcp net0 || set net0/ip 192.168.0.2 # Try DHCP first, then static
Signed-off-by: Michael Brown <mcb30@ipxe.org>
These commands exist primarily for debugging and are not generally
useful, so save 137 bytes by removing them by default.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Command implementations tend to include a substantial amount of common
boilerplate code revolving around the parsing of command-line options
and arguments. This increases the size cost of each command.
Introduce an option-parsing library that abstracts out the common
operations involved in command implementations. This enables the size
of each individual command to be reduced, and also enhances
consistency between commands.
Total size of the library is 704 bytes, to be amortised across all
command implementations.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Several use cases (e.g. the UNDI API and the EFI SNP API) require
access to the raw network device receive queue, and so currently use
manual calls to netdev_poll() on a specific network device in order to
prevent received packets from being processed by the network stack.
As an alternative, provide a flag that allows receive queue processing
to be frozen on a per-device basis. When receive queue processing is
frozen, packets will be enqueued as normal, but will not be
automatically dequeued and passed up the network stack.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some network cards do not generate interrupts when operated via the
UNDI API. Allow for this by waiting for the ISR to be triggered only
if the PXE stack advertises that it supports interrupts. When the PXE
stack does not advertise interrupt support, we skip the call to
PXENV_UNDI_ISR_IN_START and just poll the device using
PXENV_UNDI_ISR_IN_PROCESS. This matches the observed behaviour of at
least one other PXE NBP (emBoot's winBoot/i), so there is a reasonable
chance of this working.
Originally-implemented-by: Muralidhar Appalla <Muralidhar.Appalla@emulex.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Provide a "hexhyp" setting type, which functions identically to the
"hex" setting type except that it uses a hyphen instead of a colon as
the byte delimiter.
For example, if ${mac} expands to "52:54:00:12:34:56", then
${mac:hexhyp} will expand to "52-54-00-12-34-56".
Originally-implemented-by: Jarrod Johnson <jarrod.b.johnson@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Fix typographical error from commit ea631f6 ("[list] Add
list_first_entry()"). The symptom was PXELINUX 3.86 causing a stack
overflow under VMware.
Tested-by: Shao Miller <shao.miller@yrdsb.edu.on.ca>
Signed-off-by: Shao Miller <shao.miller@yrdsb.edu.on.ca>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow fc_ulp_decrement() to guarantee to fc_peer_decrement() that the
peer reference remains valid for the duration of the call, by ensuring
that ulp->peer remains valid while ulp is valid.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow link examination methods to safely assume that their
self-reference remains valid for the duration of the method call.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Calling a timer's expiry method may cause arbitrary consequences,
including arbitrary modifications of the list of retry timers.
list_for_each_entry_safe() guards against only deletion of the current
list entry; it provides no protection against other list
modifications. In particular, if a timer's expiry method causes the
subsequent timer in the list to be deleted, then the next loop
iteration will access a timer that may no longer exist.
This is a particularly nasty bug, since absolutely none of the
list-manipulation or reference-counting assertion checks will be
triggered. (The first assertion failure happens on the next iteration
through list_for_each_entry(), showing that the list has become
corrupted but providing no clue as to when this happened.)
Fix by stopping traversal of the list of retry timers as soon as we
hit an expired timer.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Rearrange the fields in struct memory_block (without altering
MIN_MEMBLOCK_SIZE) so that the "count" field of a reference-counted
object is left intact when the memory containing the object is freed.
This allows for the possibility of detecting reference-counting errors
such as double-freeing.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Check that the reference count is valid (i.e. non-negative) on each
call to ref_get() and ref_put(), using an assert() at the point of
use.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
free_memblock() currently uses list_for_each_entry() to iterate over
the free list, and may delete an entry over which it iterates. While
there is no way that the deleted list entry could be overwritten
before we reference it, this does rely upon list_del() leaving the
"next" pointer intact, which is not guaranteed. Discovered while
tracking down a list-corruption bug (as a result of having modified
list_del() to sanitise the deleted list entry).
Fix by using list_for_each_entry_safe().
Signed-off-by: Michael Brown <mcb30@ipxe.org>
There are several points in the iPXE codebase where
list_for_each_entry() is (ab)used to extract only the first entry from
a list. Add a macro list_first_entry() to make this code easier to
read.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Functions that instantiate objects generally own one reference to the
object being created. The error paths must therefore usually call
ref_put() to release this reference.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
For some install-to-SAN scenarios, the OS needs to be able to reboot
to reread the partition table. On this second boot attempt, the SAN
disk will not be empty and so iPXE will attempt to boot from it,
rather than falling back to the OS' installation media.
Work around this problem by introducing the "skip-san-boot" option,
similar in spirit to "keep-san".
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Improve the visibility of error messages by removing the redundant
final printing of the URL being booted.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some SCSI targets (observed with an EMC CLARiiON Fibre Channel target)
will not respond to commands correctly until a TEST UNIT READY has
been issued. In particular, a READ CAPACITY (10) command will return
with a success status, but no capacity data.
Fix by issuing a TEST UNIT READY command automatically, and delaying
further SCSI commands until the TEST UNIT READY has succeeded.
Reported-by: Hadar Hen Zion <hadarh@mellanox.co.il>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The FCP command reference number is intended to be used for
controlling precise delivery of FCP commands, rather than being an
essentially arbitrary tag field (as with iSCSI and SRP).
Use the Fibre Channel local exchange ID as the tag for FCP commands,
instead of the FCP command reference. The local exchange ID does not
appear within the FCP IU itself, but does appear within the FC frame
header; debug traces can therefore still be correlated with packet
captures.
Reported-by: Hadar Hen Zion <hadarh@mellanox.co.il>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Users tend to gloss over cryptic-looking error messages such as
"Boot failed: Exec format error (Error 0x2e852001)"
In particular, users tend not to report the error number, which is the
single most useful piece of diagnostic information in an iPXE error
message. Try replacing the "Error 0x2e852001" portion with a URL,
giving
"Boot failed: Exec format error (http://ipxe.org/2e852001)"
in the hope that users will, upon seeing something that is
recognisably a URL, try viewing it in a web browser. Such users will
be greeted by a web page containing a more detailed description of the
error (automatically generated from the einfo text), including links
to each line of code that might generate the error, and a section for
additional user-contributed notes. At the time of writing, a user who
visits http://ipxe.org/2e852001 would see a note saying
"This error usually indicates that the SAN disk is empty, and does
not yet contain a bootable operating system."
which may be more useful than "Exec format error (Error 0x2e852001)".
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Commit 5f4ab0d ("[iscsi] Randomise a portion of the ISID to force new
session instantiation") introduced a regression by randomising the
ISID on each call to iscsi_start_login(), which may be called more
than once per connection, rather than on each call to
iscsi_open_connection(), which is guaranteed to be called only once
per connection. This is incorrect behaviour that causes our
connection to be rejected by some iSCSI targets (observed with a
COMSTAR target under OpenSolaris).
Fix by generating the ISID in iscsi_open_connection(), and storing the
randomised ISID as part of the session state.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The config/local/*.h files are expected to be empty in most cases.
This should not cause a licence determination to fail.
Fix by ignoring config/local/*.h for licensing purposes.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When a connection to an iSCSI target is broken without gracefully
closing the TCP socket, a subsequent connection attempt may fail
because the target believes that we are attempting session
reinstatement (see RFC3720 section 5.3.1). This has been observed
using the Microsoft iSCSI target.
Section 9.1.1 of RFC3720 states that initiators should use a stable
ISID, however section 5.3.1 shows that the only way to explicitly
request that a new session be created is to use a new ISID.
Fix by randomising the "qualifier" portion of the ISID.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
We currently set both the FP and SP bits in our FIP FLOGI, to allow
the FCF the choice of selecting either a fabric-provided or a server-
provided MAC address. This complies with the FCoE specification, but
has been observed to result in an FLOGI rejection from some FCFs.
Fix by recording whether or not the FCF supports SPMA, and requesting
only one of FPMA or SPMA in our FIP FLOGI. We choose to prefer SPMA
where available, because many iPXE drivers will not be able to receive
unicast packets sent to a non-default MAC address.
Reported-by: Hadar Hen Zion <hadarh@mellanox.co.il>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When using binutils 2.20, it seems to be necessary to add -ldl to link
against -lbfd.
Reported-by: Duane Voth <duanev@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
(Ab)use the "secs" field in transmitted DHCP packets to convey
metadata about the DHCP session state. In particular:
bit 0 represents the receipt of a ProxyDHCPOFFER
bit 1 represents the receipt of a DHCPOFFER
bits 2+ represent the transmitted packet sequence number
This allows some relevant information about the internal state of the
DHCP session to be read out from a packet trace from a non-debug build
of iPXE. It also potentially allows replies to be correlated to their
requests (for servers that copy the "secs" field from request to
reply).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some ProxyDHCP implementations seem to violate the PXE specification
by expecting the client to retain options from the ProxyDHCPOFFER
rather than issuing a separate ProxyDHCPREQUEST.
Work around such broken clients by retaining the ProxyDHCPOFFER
packet, and proceeding to a ProxyDHCPREQUEST only if the
ProxyDHCPOFFER does not already contain PXE options.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
A recent patch series breaks compatibility with various common DHCP
implementations.
Revert "[dhcp] Don't consider invalid offers to be duplicates"
This reverts commit 905ea56753.
Revert "[dhcp] Honor PXEBS_SKIP option in discovery control"
This reverts commit 620b98ee4b.
Revert "[dhcp] Keep multiple DHCP offers received, and use them intelligently"
This reverts commit 5efc2fcb60.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
FCoE requires us to be able to receive unicast packets for multiple
addresses. Support this by operating in promiscuous mode.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The port ID assigned by the FLOGI response is implicit in the
destination ID used for the response (which will differ from the
source ID used for the corresponding request).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
FCoE requires the use of fabric-provided MAC addresses, which breaks
the assumption that the net device's MAC address is implicitly the
source address for net_tx() and the (unicast) destination address for
net_rx().
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The disk signature is used by some OSes (notably Windows) to identify
the boot disk, so it's useful debugging information to have.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Error numbers are signed ints. EUNIQ() should not allow implicit type
promotion based on the supplied error diambiguator, because this
causes problems with statements such as
rc = ( condition ? -EUNIQ ( EBASE, disambiguator ) : -EBASE );
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Support the extensions mandated by EDD 4.0, including:
o the ability to specify a flat physical address in a disk address
packet,
o the ability to specify a sector count greater than 127 in a disk
address packet,
o support for all functions within the Fixed Disk Access and EDD
Support subsets,
o the ability to describe a device using EDD Device Path Information.
This implementation is based on draft revision 3 of the EDD 4.0
specification, with reference to the EDD 3.0 specification. It is
possible that this implementation may need to change in order to
conform to the final published EDD 4.0 specification.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Avoid a tedious timeout delay when attempting to issue a command over
a network device that has been closed.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow multiple, space separated values (such as kernel arguments,
passed via DHCP) to be assigned to an identifier using the "set"
command.
Originally-implemented-by: Aaron Brooks <aaron@brooks1.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add PRM structures to support Hermon Ethernet devices.
Signed-off-by: Itay Gazit <itaygazit@gmail.com>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Unlike Arbel, port parameters must be applied via a separate call to
SET_PORT, rather than as parameters to INIT_PORT.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The response to a received FLOGI should probably be sent to the peer
port ID assigned as a result of the WWPN comparison.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Mapping a single page at a time causes a several-second delay at
device initialisation time. Reduce this by mapping multiple pages at
a time, using the largest block sizes possible given the alignment
constraints.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Mapping a single page at a time causes a several-second delay at
device initialisation time. Reduce this by mapping multiple pages at
a time, using the largest block sizes possible given the alignment
constraints.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Use individual page mappings rather than a single whole-region
mapping, to avoid the waste of memory that occurs due to the
constraint that each mapped block must be aligned on its own size.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Backport some changes from the Hermon driver to the Arbel driver.
Specifically:
o Rename reserved_lkey to lkey
o Add arbel_rate() to calculate transmission rates
o Structure code to allow for addition of RC queue pairs
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Reduce the amount of ICM space required by choosing to order the
various allocations in approximately descending order of alignment
requirements.
This saves approximately 512kB of host memory.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The current method for ICM allocation exactly matches the addresses
chosen by the old Etherboot driver, but does not match the
specification. Some ICM tables (notably the queue pair context table)
therefore end up incorrectly aligned.
Fix by performing allocations as per the specification.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Improve the utility of debugging messages by including the relevant
port number, queue number (QPN, CQN, EQN), work queue entry (WQE)
number, and physical addresses wherever applicable.
Add arbel_dump_cqctx() for dumping a completion queue context and
arbel_dump_qpctx() for dumping a queue pair context.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This is a backport of commit 0b1222f ("[hermon] Randomise the
high-order bits of queue pair numbers") to the Arbel driver.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This is a backport of commit cd5a213 ("[hermon] Allow software GMA to
receive packets destined for QP1") to the Arbel driver.
This patch includes a correction to a bug in the autogenerated
hardware description header file.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Only port state change events are currently mapped to our event queue,
since those are the only events we are prepared to handle. This
ignores a potentially useful source of diagnostic information in the
case of unexpected failures.
Fix by mapping all events to the event queue; a build with debugging
enabled will therefore at least dump the raw content of the unexpected
events.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Only port state change events are currently mapped to our event queue,
since those are the only events we are prepared to handle. This
ignores a potentially useful source of diagnostic information in the
case of unexpected failures.
Fix by mapping all events to the event queue; a build with debugging
enabled will therefore at least dump the raw content of the unexpected
events.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iPXE currently uses the first port's port GUID as the node GUID,
rather than using the (possibly distinct) real node GUID. This can
confuse opensm during the handover to a loaded OS: it thinks the port
already belongs to a different node and so discards our port
information with a warning message about duplicate ports. Everything
is picked up correctly on the second subnet sweep, after opensm has
established that the "old" node no longer exists, but this can delay
link-up unnecessarily by several seconds.
Fix by using the real node GUID.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
No event is generated upon reaching INIT, so we must poll separately
for link state changes while we remain DOWN.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
No event is generated upon reaching INIT, so we must poll separately
for link state changes while we remain DOWN.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
ib_smc_update() potentially updates the Infiniband port state, and so
should almost always be followed by a call to ib_link_state_changed().
The one exception is the call made to ib_smc_update() before the
device is registered.
Fix by removing explicit calls to ib_link_state_changed() from drivers
using ib_smc_update(), including a call to ib_link_state_changed()
within ib_smc_update(), and creating a separate ib_smc_init() for use
prior to device registration.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The sense key gives a first idea of what the problem might be, and so
is potentially useful in diagnosing problems in a non-debug build.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
It seems as though several drivers neglect to strip the Ethernet CRC,
which will cause the FCoE footer to be misplaced and result
(coincidentally) in an "invalid CRC" error from FCoE.
Add a human-visible message indicating this, to aid in diagnosis.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Errors generated by the network layer in response to received packets
are liable to be lost, since nothing systematically records these
errors and often the packets do not propagate far enough through the
stack to impact upon user-visible processes.
Improve this situation by recording network-layer errors in the
network device statistics.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The Fibre Channel Protocol provides a mechanism for transporting SCSI
commands via a Fibre Channel fabric.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add support for Fibre Channel ports, peers, and upper-layer protocols,
and for Fibre Channel extended link services.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The block device interface used in gPXE predates the invention of even
the old gPXE data-transfer interface, let alone the current iPXE
generic asynchronous interface mechanism. Bring this old code up to
date, with the following benefits:
o Block device commands can be cancelled by the requestor. The INT 13
layer uses this to provide a global timeout on all INT 13 calls,
with the result that an unexpected passive failure mode (such as
an iSCSI target ACKing the request but never sending a response)
will lead to a timeout that gets reported back to the INT 13 user,
rather than simply freezing the system.
o INT 13,00 (reset drive) is now able to reset the underlying block
device. INT 13 users, such as DOS, that use INT 13,00 as a method
for error recovery now have a chance of recovering.
o All block device commands are tagged, with a numerical tag that
will show up in debugging output and in packet captures; this will
allow easier interpretation of bug reports that include both
sources of information.
o The extremely ugly hacks used to generate the boot firmware tables
have been eradicated and replaced with a generic acpi_describe()
method (exploiting the ability of iPXE interfaces to pass through
methods to an underlying interface). The ACPI tables are now
built in a shared data block within .bss16, rather than each
requiring dedicated space in .data16.
o The architecture-independent concept of a SAN device has been
exposed to the iPXE core through the sanboot API, which provides
calls to hook, unhook, boot, and describe SAN devices. This
allows for much more flexible usage patterns (such as hooking an
empty SAN device and then running an OS installer via TFTP).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Doorbell records are currently embedded within the completion queue
and receive work queue strucures, which are allocated using zalloc()
and so have an alignment guarantee of only sizeof(void*), i.e. four
bytes. This is sufficient for the receive work queue, but not for the
completion queue, which requires an alignment guarantee of eight
bytes.
Though not guaranteed, it so happens that zalloc() will always return
a pointer that is exactly four bytes above a sixteen-byte boundary.
The completion queue doorbell record is therefore always misaligned,
and the value passed to the hardware via SW2HW_CQ is actually always
pointing to the page_offset value within the MTT descriptor (which
directly precedes the inline doorbell record). Provided that the page
offset is greater than 0x100, this looks to the hardware like an
update_ci value of greater than 0x010000 (taking into account
endianness differences), and so the hardware will happily deliver more
than 0x010000 completions before stopping. Hence this problem is
rarely observable.
Fix by allocating the doorbell records separately and using the
correct alignment constraints.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Give completion queues a chance to deliver exception events by
programming in the number of our event queue (currently used only for
port state changes).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Improve the utility of debugging messages by including the relevant
port number, queue number (QPN, CQN, EQN), work queue entry (WQE)
number, and physical addresses wherever applicable.
Add hermon_dump_cqctx() for dumping a completion queue context, and
hermon_fill_nop_send_wqe() for inserting NOPs into send work queues.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
DBG_ENABLE() and DBG_DISABLE() are currently constrained to enabling
and disabling only debug levels that are compiled in for the current
object. For example, a DBG_ENABLE(DBGLVL_EXTRA) in foo.c will not be
able to affect output from other objects at DBGLVL_EXTRA unless foo.c
is itself compiled with DBGLVL_EXTRA enabled.
Partially fix by removing this unnecessary constraint. (Note that it
is still necessary for at least one debug level to be compiled in for
the object invoking DBG_ENABLE()/DBG_DISABLE().)
Signed-off-by: Michael Brown <mcb30@ipxe.org>
An attempt to transmit a packet of 8192 bytes or larger will collide
with the status bits in the TX descriptor. This gives the appearance
of the network card's transmit data path having just suddenly stopped
responding; iPXE is waiting for the card to report a TX completion
but, because of the status bit collision, the card thinks that the
descriptor has not yet been written.
Fix by explicitly checking for oversized packets in rtl_transmit().
Discovered during Fibre Channel over Ethernet testing, and debugged by
using gdb to examine the state of the emulated rtl8139 card in qemu.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
xfer_window_changed() can be used to notify peers that an interface is
now ready to accept data. This can potentially be used to eliminate
the need for wasteful processes that simply poll xfer_window() until
the window becomes non-zero.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Replace the explicit calls from the Infiniband core to the IPoIB layer
with the general concept of an Infiniband upper-layer driver
(analogous to a PCI driver) which can create arbitrary devices on top
of Infiniband devices.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add the concept of a network upper-layer driver, which can create
arbitrary devices on top of network devices.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The rtl8139 driver includes the Ethernet CRC within the received
packet. All current protocols ignore trailing garbage, but FCoE
requires the frame length to be correct (since the FCoE footer
position is calculated from the end of the packet), so fix the driver
to strip out the CRC.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Guarantee that a retry timer cannot go out of scope while the timer is
running, and provide a guarantee to the expiry callback that the timer
will remain in scope during the entire callback (similar to the
guarantee provided to interface methods).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iPXE has never supported SEEK_END; the usage of "whence" offers only
the options of SEEK_SET and SEEK_CUR and so is effectively a boolean
flag. Further flags will be required to support additional metadata
required by the Fibre Channel network model, so repurpose the "whence"
field as a generic "flags" field.
xfer_seek() has always been used with SEEK_SET, so remove the "whence"
field altogether from its argument list.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add PCI ID 8086:27dc to the eepro100 driver.
Reported-by: Cédric Delmas <c.delmas@akka.eu>
Signed-off-by: Thomas Miletich <thomas.miletich@gmail.com>
Signed-off-by: Marty Connor <mdc@etherboot.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Declarations without the accompanying __table_entry cause misalignment
of the table entries when using gcc 4.5. Fix by adding the
appropriate __table_entry macro or (where possible) by removing
unnecessary forward declarations.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Even with the noinline specifier added by commit 1a260f8, gcc may skip
calls to non-inlinable functions that it knows have no side
effects. This caused the get_cached_dhcpack() call in start_dhcp(),
the weak stub of which has no code in its body, to be removed,
preventing cached DHCP from working.
Fix by adding a __keepme macro to compiler.h expanding to asm(""), as
recommended by gcc's info page, and using it in the weak stub for
get_cached_dhcpack().
Reported-by: Aaron Brooks <aaron@brooks1.net>
Tested-by: Aaron Brooks <aaron@brooks1.net>
Signed-off-by: Joshua Oreman <oremanj@rwcr.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add the tap driver that can be used like:
$ ./ipxe.linux --net tap,if=tap0,mac=00:0c:29:c5:39:a1
The if setting is mandatory.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Support qemu-like arguments for network setup:
--net driver_name[,setting=value]*
and global settings:
--settings setting=value[,setting=value]*
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add the base to build linux drivers and the linux UI code on. UI
fills device requests, which are later walked over by the linux
root_driver and delegated to specific linux drivers.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
There exists an smbios userspace library so implementing this is
probably possible, but doesn't seem really important to have in
userspace. Hence provide a dummy implementation returning an error.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add user access API for linux.
On linux userspace virtual == user == phys addresses. Physical
addresses also being the same is wrong, but there is no general way of
converting userspace addresses to physical as what appears to be
contiguous in userspace is physically fragmented. Currently only the
DMA memory is special-cased, but its conversion to bus addresses is
done in phys_to_bus. This is known to break virtio as it is passing
phys addresses to the virtual device.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add linux console using stdin/out. Configure the attached terminal for
readline use.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add makefiles, ld scripts and default config for linux platform for
both i386 and x86_64.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Don't implement strtoul() on top of strtoull() as strtoull() is much
bigger and only used on linux currently. Instead refactor most of the
logic out of strtoul() into static inlines and reuse that. Also put it
in a separate object so it won't get linked in.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
alloc_memblock() and free_memblock() are internal.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The everything target builds multiple image types on each supported
arch/platform combination.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When building multiple targets per BIN with multiple jobs, for
example:
make -j16 bin-i386-efi/ipxe.efi{,drv,rom} bin-x86_64-efi/ipxe.efi{,drv,rom}
we would invoke a make subprocess for each goal in parallel resulting
in multiple makes running in a single BIN directory. Fix by grouping
goals per BIN directory and invoking only one make per BIN. It is
both safer and faster.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
pcbios specific get_memmap() is used by the b44 driver making
all-drivers builds fail on other platforms. Move it to the I/O API
group and provide a dummy implementation on EFI.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The "dhcp" command now accepts a list of interfaces to try until one
succeeds. For example:
iPXE> dhcp net0 net1 net2
If no interfaces are specified, all interfaces will be tried.
Note that interfaces that fail to DHCP are closed in order to avoid
memory exhaustion. This behavior differs from the previous "dhcp"
command implementation but should not affect any existing scripts
since a "dhcp" command failure would in any case cause the script to
abort.
Originally-implemented-by: Lars Kellogg-Stedman <lars@oddbit.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
COM32 binaries generally expect to run with interrupts
enabled. Syslinux does so, and COM32 programs will execute cli/sti
pairs when running a critical section, to provide mutual exclusion
against BIOS interrupt handlers. Previously, under iPXE, the IDT was
not valid, so any interrupt (e.g. a timer tick) would generally cause
the machine to triple fault.
This change introduces code to:
- Create a valid IDT at the same location that syslinux uses
- Create an "interrupt jump buffer", which contains small pieces of
code that simply record the vector number and jump to a common
handler
- Thunk down to real mode and execute the BIOS's interrupt handler
whenever an interrupt is received in a COM32 program
- Switch IDTs and enable/disable interrupts when context switching to
and from COM32 binaries
Testing done:
- Booted VMware ESX using a COM32 multiboot loader (mboot.c32)
- Built with GDBSERIAL enabled, and tested breakpoints on int22 and
com32_irq
- Put the following code in a COM32 program:
asm volatile ( "sti" );
while ( 1 );
Before this change, the machine would triple fault
immediately. After this change, it hangs as expected. Under Bochs,
it is possible to see the interrupt handler run, and the current
time in the BIOS data area gets incremented.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This patch adds a native iPXE forcedeth driver and removes the legacy
Etherboot forcedeth driver. It supports 40 different chips, compared
to the original 14.
It has been tested on a NIC with an CK804 Ethernet Controller, and the
results of downloading 5 100mb images in a row have been:
12/11/11/11/11 seconds; booting DSL using pxelinux also succeeded. The
driver has also been tested by chaining undionly.kpxe and it worked.
Signed-off-by: Andrei Faur <da3drus@gmail.com>
Tested-by: Andrei Faur <da3drus@gmail.com>
Tested-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
An assembly version of memswap() is in an x86 word-length-agnostic
header file, but it used 32-bit registers to store pointers, leading
to memory errors responding to ARP queries on 64-bit systems.
Signed-off-by: Joshua Oreman <oremanj@rwcr.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When we received an encrypted packet, after replacing it with its
decrypted version and freeing the encrypted original, we would
continue to look at the header of the now-freed original packet. Fix
by moving the header pointer to point at the decrypted packet instead.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The workhorse function for detecting 802.11 security was still named
_sec80211_detect(), a holdover from the old style of weak function
handling, with the result that all networks would be identified as
"unknown".
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Currently, if elf2efi.c is compiled using a 32-bit HOST_CC, then the
resulting elf2efi64 binary will generate 32-bit EFI binaries instead
of 64-bit EFI binaries.
The problem is that elf2efi.c uses the MDE_CPU_* definitions to decide
whether to output a 32-bit or 64-bit PE binary. However, MDE_CPU_*
gets defined in ProcessorBind.h, depending on the compiler's target
architecture. Overriding them on the command line doesn't work in the
expected way, and you can end up in cases where both MDE_CPU_IA32 and
MDE_CPU_X64 are defined.
Fix by using a separate definition, EFI_TARGET_IA32/EFI_TARGET_X64,
which is specified only on the command line.
Signed-off-by: Geoff Lywood <glywood@vmware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow packets in the receive queue to be discarded in order to free up
memory. This avoids a potential deadlock condition in which the
missing packet can never be received because the receive queue is
occupying all of the memory available for further RX buffers.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add a facility allowing cached data to be discarded in order to
satisfy memory allocations that would otherwise fail.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Maintain a queue of received packets, so that lost packets need not
result in retransmission of the entire TCP window.
Increase the TCP window to 8kB, in order that we can potentially
transmit enough duplicate ACKs to trigger Fast Retransmission at the
sender.
Using a 10MB HTTP download in qemu-kvm with an artificial drop rate of
1 in 64 packets, this reduces the download time from around 26s to
around 4s.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Setting NETDEV_DISCARD_RATE to a non-zero value will cause one in
every NETDEV_DISCARD_RATE packets to be discarded at random on both
the transmit and receive datapaths, allowing the robustness of
upper-layer network protocols to be tested even in simulation
environments that provide wholly reliable packet transmission.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This patch adds a native iPXE virtio-net driver and removes the legacy
Etherboot virtio-net driver. The main reasons for doing this are:
1. Multiple virtio-net NICs are now supported by iPXE. The legacy
driver kept global state and caused issues in virtual machines with
more than one virtio-net device.
2. Faster downloads. The native iPXE driver downloads 100 MB over
HTTP in 12s, the legacy Etherboot driver in 37s. This simple
benchmark uses KVM with tap networking and the Python
SimpleHTTPServer both running on the same host.
Changes to core virtio code reduce vring descriptors to 256 (QEMU uses
128 for virtio-blk and 256 for virtio-net) and change the opaque token
from u16 to void*. Lowering the descriptor count reduces memory
consumption. The void* opaque token change makes driver code simpler.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The DHCP settings registered as a child of the netdevice settings are
not unregistered anywhere. This prevents the netdevice from being
freed on shutdown.
Fix by automatically unregistering any child settings when the parent
settings are unregistered.
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iPXE currently forces sending (i.e. sends a pure ACK even in the
absence of fresh data to send) only in response to packets that
consume sequence space or that lie outside of the receive window.
This ignores the possibility that a previous ACK was not actually sent
(due to, for example, the retransmission timer running).
This does not cause incorrect behaviour, but does cause unnecessary
retransmissions from our peer. For example:
1. Peer sends final data packet (ack 106 seq 521..523)
2. We send FIN (seq 106..107 ack 523)
3. Peer sends FIN (ack 106 seq 523..524)
4. We send nothing since retransmission timer is running for our FIN
5. Peer ACKs our FIN (ack 107 seq 524..524)
6. We send nothing since this packet consumes no sequence space
7. Peer retransmits FIN (ack 107 seq 523..524)
8. We ACK peer's FIN (seq 107..107 ack 524)
What should happen at step (6) is that we should ACK the peer's FIN,
since we can deduce that we have never sent this ACK.
Fix by maintaining an "ACK pending" flag that is set whenever we are
made aware that our peer needs an ACK (whether by consuming sequence
space or by sending a packet that appears out of order), and is
cleared only when the ACK packet has been transmitted.
Reported-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iPXE currently repurposes the retransmission timer to hold the TCP
connection in the TIME_WAIT state (i.e. waiting for up to 2*MSL in
case we are required to re-ACK our peer's FIN due to a lost ACK).
However, the fact that this timer is running will prevent such an ACK
from ever being sent, since the logic in tcp_xmit() assumes that a
running timer indicates that we ourselves are waiting for an ACK and
so blocks the transmission. (We always wait for an ACK before sending
our next packet, to keep our transmit data path as simple as
possible.)
Fix by using an entirely separate timer for the TIME_WAIT state, so
that packets can still be sent.
Reported-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Split src_template into deps_template (which handles the definition of
foo_DEPS) and rules_template (which handles the rules referencing
foo_DEPS). The rules_template is not affected by any included header
files and so does not need to be reprocessed following a change to an
included header file.
This reduces the time required to rebuild the Makefile rules following
a change to stdint.h by around 45%, at a cost of increasing the time
required to rebuild after a "make veryclean" by around 3%.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Speed up dependency generation by omitting the totally unnecessary
"rm" and "touch" commands. This reduces the time taken to generate
dependencies by around 6%.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Weak functions whose visibility is hidden may be inlined due to a bug
in GCC. Explicitly mark weak functions noinline to work around the
problem.
This makes the PXE_MENU config option work again, the PXE boot menu
was never being called because the compiler inlined a weak stub
function.
The GCC bug was identified and fixed by Richard Sandiford
<rdsandiford@googlemail.com> but in the meantime iPXE needs to
implement a workaround.
Reported-by: Steve Jones <steve@squaregoldfish.co.uk>
Reported-by: Shao Miller <shao.miller@yrdsb.edu.on.ca>
Suggested-by: Joshua Oreman <oremanj@rwcr.net>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Continue calling step() while displaying the shell banner. This
potentially allows TCP connections to close gracefully after a failed
boot attempt.
Inspired-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Include the pause() and more() debugging functions within the general
iPXE debugging framework, by introducing DBGxxx_PAUSE() and
DBGxxx_MORE() macros.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
putline() was introduced back in 2007 for a feature that was never
committed. No console driver implements it and no code calls it, so
remove it from struct console_driver.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Every other scalar integer value in struct tcp_connection is in host
byte order; change the definition of local_port to match.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
image_set_cmdline() strdup()s cmdline, which free_image() doesn't
clean up.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This bug caused .probe to fail because the NIC did not reset properly.
Signed-off-by: Andrei Faur <da3drus@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add NonVolatile Option (nvo) and NonVolatile Storage (nvs) support to
the myri10ge driver using the EEPROM read/write mechanism provided by
the NIC's Vendor Specific PCI capability.
The myri10ge NIC is capabile of storing 64KB or more of nonvolatile
options, but this patch advertises only 512 bytes of nvo storage
because iPXE malloc's a buffer matching the total size we advertise.
512 is plenty without wasting malloc'd memory. (The 2 other drivers
currently supporting nvo advertise 256 bytes or less.)
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Make Ctrl-D delete a setting, because the Text User Interface (tui)
previously provided no way to delete a setting. Also, update the
on-screen instructions to describe the new feature. Deleting settings
is especially important for settings stored in precious nonvolatile
storage.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Implement jump scrolling with "..." displayed where the settings list
continues off-screen, because there are now too many settings to fit
on screen in the "config ..." text user interface.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add a PCI_CAP_ID_VNDR definition for the PCI standard "Vendor
Specific" capability ID.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The existence and usage of the BEV entry point is covered by the PnP
spec, not the BBS spec; the BBS spec merely describes a policy for
selecting the boot device order. iPXE should therefore check only for
a PnP BIOS in order to decide whether or not to hook INT19.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Commit ea12dc0 ("[build] Avoid hard-coding the path to perl")
introduced a build failure for fully clean trees (e.g. after running
"make veryclean"), since the dependency upon $(PARSEROM) now includes
a dependency upon "perl" (which doesn't exist) rather than upon
"/usr/bin/perl" (which does exist).
There should of course be no dependency upon the perl binary at all;
the dependency should be upon "./util/parserom.pl" alone.
Fix by removing the $(PERL) from the definition of Perl-based utility
paths, and adding $(PERL) at the point of usage.
Reported-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The path "/usr/bin/perl" has been hard-coded since Etherboot 5.1, for
no discernible reason. Use just "perl" instead to fix the
inconsistency and allow building on systems with Perl installed
outside of /usr/bin.
Reported-by: Gabor Z. Papp <gzp@papp.hu>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This patch removes the cfg lookup made in the r8169 driver and
replaces it with equivalent information found in the driver_data field
of the pci_device_id structure.
Signed-off-by: Andrei Faur <da3drus@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The handshake record in TLS can contain multiple messages.
Originally-fixed-by: Timothy Stack <tstack@vmware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Since more reference-counted structures than embedded images might
want to mark themselves unfreeable, expose a dummy ref_no_free().
Signed-off-by: Michael Brown <mcb30@ipxe.org>
xfer_vredirect() should not be allowed to propagate to a pass-through
interface. For example, when an HTTPS connection is opened, the
redirect message should cause the TLS layer to reopen the TCP socket,
rather than causing the HTTP layer to disconnect from the TLS layer.
Fix by allowing for non-pass-through interface methods, and setting
xfer_vredirect() to be one such method.
This is slightly ugly, in that it complicates the notion of an
interface method call by adding a "pass-through" / "non-pass-through"
piece of metadata. However, the only current user of xfer_vredirect()
is iscsi.c, which uses it only because we don't yet have an
ioctl()-style call for retrieving the underlying socket address.
The new interface infrastructure allows for such a call to be created,
at which time this sole user of xfer_vredirect() can be removed,
xfer_vredirect() can cease to be an interface method and become simply
a wrapper around xfer_vreopen(), and the concept of a non-pass-through
interface method can be reverted.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Remove data-xfer as an interface type, and replace data-xfer
interfaces with generic interfaces supporting the data-xfer methods.
Filter interfaces (as used by the TLS layer) are handled using the
generic pass-through interface capability. A side-effect of this is
that deliver_raw() no longer exists as a data-xfer method. (In
practice this doesn't lose any efficiency, since there are no
instances within the current codebase where xfer_deliver_raw() is used
to pass data to an interface supporting the deliver_raw() method.)
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Remove name-resolution as an interface type, and replace
name-resolution interfaces with generic interfaces supporting the
resolv_done() method.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Remove job-control as an interface type, and replace job-control
interfaces with generic interfaces supporting the close() method.
(Both done() and kill() are absorbed into the function of close();
kill() is merely close(-ECANCELED).)
Signed-off-by: Michael Brown <mcb30@ipxe.org>
We have several types of object interface at present (data-xfer, job
control, name resolution), and there is some duplication of
functionality between them. For example, job_done(), job_kill() and
xfer_close() are almost isomorphic to each other.
This updated version of the object interface mechanism allows for each
interface to export an arbitrary list of supported operations.
Advantages include:
Operations methods now receive a pointer to the object, rather than
a pointer to the interface. This allows an object to, for example,
implement a single close() method that can handle close() operations
from any of its exposed interfaces.
The close() operation is implemented as a generic operation (rather
than having specific variants for data-xfer, job control, etc.).
This will allow functions such as monojob_wait() to be used to wait
for e.g. a name resolution to complete.
The amount of boilerplate code required in objects is reduced, not
least because it is no longer necessary to include per-interface
methods that simply use container_of() to derive a pointer to the
object and then tail-call to a common per-object method.
The cost of adding new operations is reduced; adding a new data-xfer
operation such as stat() no longer incurs the penalty of adding a
.stat member to the operations table of all existing data-xfer
interfaces.
The data-xfer, job control and name resolution interfaces have not yet
been updated to use the new interface mechanism, but the code will
still compile and run.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Standardise on using timer_init() to initialise an embedded retry
timer, to match the coding style used by other embedded objects.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Standardise on using ref_init() to initialise an embedded reference
count, to match the coding style used by other embedded objects.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This patch replaces the old pcnet32 driver with a new one that
uses iPXE's API.
Signed-off-by: Andrei Faur <da3drus@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
It is conceivable that the process may terminate during the execution
of step(). If nothing else holds a reference to the containing
object, this would cause the object to be freed prior to returning
from step().
Add a ref_get()/ref_put() around the call to ->step() to prevent this
from happening.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
After changing the driver to refill after feed, if any error occurs a
non-contiguous empty buffer will be introduced in the ring due to my
reuse-buffer-when-error implementation.
Reported-by: Marty Connor <mdc@etherboot.org>
Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
A new driver for JMicron Ethernet controller.
Reviewed-by: Joshua Oreman <oremanj@rwcr.net>
Reviewed-by: Michael Brown <mbrown@fensystems.co.uk>
Reviewed-by: Marty Connor <mdc@etherboot.org>
Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add a new network driver that consumes the EFI Simple Network
Protocol. Also add a bus driver that can find the Simple Network
Protocol that iPXE was loaded from; the resulting behavior is similar
to the "undionly" driver for BIOS systems.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Fix up the whitespace errors inadvertently introduced by the
last-minute rename from the internal QLogic codename to "qib7322".
Signed-off-by: Michael Brown <mcb30@ipxe.org>
strerror() has not been able to use the PXE-only error table since
commit 9aa61ad ("Add per-file error identifiers") back in 2007.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Autodetect the BSD licence statement in EFI header files, and add a
suitable FILE_LICENCE macro to the version imported into the iPXE
tree.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Now that the PACKED macro conflict is resolved, we can use an
unmodified import of the EFI header files (using
include/ipxe/efi/import.pl).
Synchronised to EDK2 SVN revision 10556.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Most of iPXE uses __attribute__((packed)) anyway, and PACKED conflicts
with an identically-named macro in the upstream EFI header files.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
See RFC 4578 for details.
Signed-off-by: Joshua Oreman <oremanj@rwcr.net>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The linker chooses to look for _start first and always picks
efidrvprefix.o to satisfy it (probably because it's earlier in the
archive) which causes a multiple definition error when the linker
later has to pick efiprefix.o for other symbols.
Fix by using EFI-specific TGT_LD_FLAGS with an explicit entry point.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Joshua Oreman <oremanj@rwcr.net>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Apart from format specifier fixes there are two changes in proper code:
- Change type of regs in skge_hw to unsigned long
- Cast result of sizeof in myri10ge to uint32_t
Both don't change anything for i386 and should be fine on x86_64.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Joshua Oreman <oremanj@rwcr.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This fixes a regression in BOOTP support; since BOOTP requests often
have the `siaddr' field set to 0.0.0.0, they would be considered
duplicates of the first zeroed-out offer slot.
Signed-off-by: Joshua Oreman <oremanj@rwcr.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This removes the need for inline safety wrappers, marginally reducing
the size penalty of weak functions, and works around an apparent
binutils bug that causes undefined weak symbols to not actually be
NULL when compiling with -fPIE (as EFI builds do).
A bug in versions of binutils prior to 2.16 (released in 2005) will
cause same-file weak definitions to not work with those
toolchains. Update the README to reflect our new dependency on
binutils >= 2.16.
Signed-off-by: Joshua Oreman <oremanj@rwcr.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Dependencies are considered in left-to-right order so the source file
needs to come first in this case.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Joshua Oreman <oremanj@rwcr.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
On 64-bit systems with both 32-bit and 64-bit libraries installed, ld
tends to generate noisy "skipping incompatible /usr/lib/libxxx.so"
messages when building elf2efi.c.
Fix by passing --no-warn-search-mismatch to ld.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Currently, if you attempt to build 64-bit EFI binaries on a 32-bit
system without a suitable cross-compiling version of libbfd, the iPXE
build will die with a segmentation fault in elf2efi64.
Fix by properly handling the return value from bfd_check_format().
Signed-off-by: Michael Brown <mcb30@ipxe.org>
It is permissible for a DHCP packet containing PXE options to specify
only "discovery control", instead of the more typical boot menu +
prompt options. This is the strategy used by older versions of
dnsmasq; by specifying the discovery control as PXEBS_SKIP, they cause
vendor PXE ROMs to ignore boot server discovery and just use the
filename and next-server options in the initial (Proxy)DHCP packet.
Modify iPXE to accept this behavior, to be more compatible with the
Intel firmware.
Signed-off-by: Joshua Oreman <oremanj@rwcr.net>
Tested-by: Kyle Kienapfel <kyle@shadowmage.org>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
PMKID checking is an additional pre-check that helps detect invalid
passphrases before going through the full handshaking procedure. It
takes up some amount of code size, and is not necessary from a
security perspective. It also is implemented improperly by some
routers, which was causing iPXE to give spurious authentication
errors. Remove it for these reasons.
Signed-off-by: Joshua Oreman <oremanj@rwcr.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
COMBOOT API calls set the carry flag on failure. This was not being
propagated because the COMBOOT interrupt handler used iret to return
with EFLAGS restored from the stack. This patch propagates CF before
returning from the interrupt.
Reported-by: Geoff Lywood <glywood@vmware.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Marty Connor <mdc@etherboot.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iPXE currently updates the TCP sequence number after delivering the
data to the application via xfer_deliver_iob(). If the application
responds to the received data by transmitting more data, this would
result in a stale ACK number appearing in the transmitted packet,
which potentially causes retransmissions and also gives the
undesirable appearance of violating causality (by sending a response
to a message that we claim not to have yet received).
Reported-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Microsoft WDS can end up calling PXENV_RESTART_TFTP to execute a
second-stage NBP which then exits. Specifically, wdsnbp.com uses
PXENV_RESTART_TFTP to execute pxeboot.com, which will exit if the user
does not press F12. iPXE currently treats PXENV_RESTART_TFTP as a
normal PXE API call, and so attempts to return to wdsnbp.com, which
has just been vaporised by pxeboot.com.
Use rmsetjmp/rmlongjmp to preserve the stack state as of the initial
NBP execution, and to restore this state immediately prior to
executing the NBP loaded via PXENV_RESTART_TFTP. This matches the
behaviour in the PXE spec (which says that "if TFTP is restarted,
control is never returned to the caller"), and allows pxeboot.com to
exit relatively cleanly back to iPXE.
As with all usage of setjmp/longjmp, there may be subtle corner case
bugs due to not gracefully unwinding any state accumulated by the time
of the longjmp call, but this seems to be the only viable way to
provide the specified behaviour.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some switch configurations will refuse to enable our port unless we
can speak LACP to inform the switch that we are alive. Add a very
simple passive LACP implementation that is sufficient to convince at
least Linux's bonding driver (when tested using qemu attached to a tap
device enslaved to a bond device configured as "mode=802.3ad").
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add an infrastructure allowing the prefix to provide an open_payload()
method for obtaining out-of-band access to the whole iPXE image. Add
a mechanism within this infrastructure that allows raw access to the
expansion ROM BAR by temporarily borrowing an address from a suitable
memory BAR on the same PCI card.
For cards that have a memory BAR that is at least as large as their
expansion ROM BAR, this allows large iPXE ROMs to be supported even on
systems where PMM fails, or where option ROM space pressure makes it
impossible to use PMM shrinking. The BIOS sees only a stub ROM of
approximately 3kB in size; the remainder (which can be well over 64kB)
is loaded only at the time iPXE is invoked.
As a nice side-effect, an iPXE .mrom image will continue to work even
if its PMM-allocated areas are overwritten between initialisation and
invocation.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The only remaining useful function of makerom.pl is to correct the ROM
and PnP checksums; the PCI IDs are set at link time, and padding is
performed using padimg.pl.
Option::ROM already provides a facility for correcting the checksums,
so we may as well just use this instead.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add a trailing "ok" to the "initialising devices message", to match
the visual style of the "ok" now added to the "starting execution"
message.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
It is common for system memory maps to be grotesquely unreliable
during POST. Many sanity checks have been added to the memory map
reading code, but these do not catch all problems.
Skip relocation entirely if called during POST. This should avoid the
problems typically encountered, at the cost of slightly disrupting the
memory map of an operating system booted via iPXE when iPXE was
entered during POST. Since this is a very rare special case (used,
for example, when reflashing an experimental ROM that would otherwise
prevent the system from completing POST), this is an acceptable cost.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some BIOSes (at least some AMI BIOSes) tend to refuse to allocate a
single area large enough to hold both the iPXE image source and the
temporary decompression area, despite promising a largest available
PMM memory block of several megabytes. This causes ROM image
shrinking to fail on these BIOSes, with undesirable consequences:
other option ROMs may be disabled due to shortage of option ROM space,
and the iPXE ROM may itself be corrupted by a further BIOS bug (again,
observed on an AMI BIOS) which causes large ROMs to end up overlapping
reserved areas of memory. This can potentially render a system
unbootable via any means.
Increase the chances of a successful PMM allocation by dropping the
alignment requirement (which is redundant now that we can enable A20
from within the prefix); this allows us to reduce the allocation size
from 2MB down to only the required size.
Increase the chances still further by using two separate allocations:
one to hold the image source (i.e. the copy of the ROM before being
shrunk) and the other to act as the decompression area. This allows
ROM image shrinking to take place even on systems that fail to
allocate enough memory for the temporary decompression area.
Improve the behaviour of iPXE in systems with multiple iPXE ROMs by
sharing PMM allocations where possible. Image source areas can be
shared with any iPXE ROMs with a matching build identifier, and the
temporary decompression area can be shared with any iPXE ROMs with the
same uncompressed size (rounded up to the nearest 128kB).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Use INT 15,88 to find a suitable temporary decompression area, rather
than a fixed address. This hopefully gives us a better chance of not
treading on any PMM-allocated areas, in BIOSes where PMM support
exists but tends not to give us the large blocks that we ask for.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Always call INT 15,88 even if we don't use the result. This allows
DEBUG=memmap to show the complete result set returned by all of the
INT 15 memory-map calls.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown
Jarrod Johnson
Shao Miller
Dave Hansen
Itay Gazit
Marty Connor
Piotr Jaroszyński
Joshua Oreman
Geoff Lywood
Andrei Faur
Stefan Hajnoczi
Guo-Fu Tseng
Alessandro Salvatori
Glenn Brown
Erwan Velu
Wu Fengguang