Add a configuration settings block for each net device. This will
provide the parent scope for settings applicable only to that network
device (e.g. non-volatile options stored on the NIC, options obtained via
DHCP, etc.).
Expose the MAC address as a setting.
Add the notion of the settings hierarchy, complete with
register/unregister routines.
Rename set->store and get->fetch to avoid naming conflicts with get/put
as used in reference counting.
Add the concept of an abstract configuration setting, comprising a (DHCP)
tag value and an associated byte sequence.
Add the concept of a settings namespace.
Add functions for extracting string, IPv4 address, and signed and
unsigned integer values from configuration settings (analogous to
dhcp_snprintf(), dhcp_ipv4_option(), etc.).
Update functions for parsing and formatting named/typed options to work
with new settings API.
Update NVO commands and config UI to use new settings API.
Timers are sometimes required before the call to initialise(), so we
cannot rely on initialise() to set up the timers before use.
Also fix a potential integer overflow issue in generic_currticks_udelay()
Add missing comments to timer code.
Lock system if no suitable timer source is found.
Fix initialisation order so that timers are initialised before code that
needs to use them.
Allow encapsulated options to be specified as e.g. "175.3". As a
side-effect, change the separator character for the type field from "." to
":"; for example, the IP address pseudo-option is now "175.3:ipv4".
Add parse and display routines for 16-bit and 32-bit integer configuration
settings.
Add parse and display routines for hex-string configuration settings.
Assume hex-string as a configuration setting type if no type is explicitly
specified.
show_setting() and related functions now return an "actual length" in the
style of snprintf(). This is to allow consumers to allocate buffers large
enough to hold the formatted setting.
When PMM is used, the gPXE image source will no longer be in base memory.
Decompression of .text16 and .data16 can therefore no longer be done in
real mode.
Use BBS installation check to see if we need to hook INT19 even on a PnP
BIOS.
Verify that $PnP signature is paragraph-aligned; bochs/qemu BIOS provides
a dummy $PnP signature with no valid entry point, and deliberately
unaligns the signature to indicate that it is not properly valid.
Print message if INT19 is hooked.
Attempt to use PMM even if BBS check failed.
WinPE's pxeboot.n12 takes the BufferLimit returned by gPXE (indicating
the size of gPXE's internal DHCP packet buffers) and erroneously passes
it in as BufferSize (indicating the size of pxeboot.n12's DHCP packet
buffer). If these don't match, then pxeboot.n12 ends up instructing gPXE
to overwrite parts of its data segment.
Change gPXE's internal DHCP packet buffers to be exactly
sizeof(BOOTPLAYER_t) bytes to work around this problem.
ROM initialisation vector now attempts to allocate a 2MB block using
PMM. If successful, it copies the ROM image to this block, then
shrinks the ROM image to allow for more option ROMs. If unsuccessful,
it leaves the ROM as-is.
ROM BEV now attempts to return to the BIOS, resorting to INT 18 only
if the BIOS stack has been corrupted.
The generate-by-PCI-device-ID rules (bin/pci_VVVV_DDDD.rom) are generally
used for building actual ROM images to be burned, and the burning
utilities generally run under some DOS variant. Change the filename from
pci_VVVV_DDDD.rom to VVVVDDDD.rom so that it is compatible with the DOS
8.3-character filename limit.
This allows pxelinux to execute arbitrary gPXE commands. This is
remarkably unsafe (not least because some of the commands will assume
full ownership of memory and do nasty things like edit the e820 map
underneath the calling pxelinux), but it does allow access to the
"sanboot" command.
Replace a printf with a DBG in timer_rtdsc.c
Replace a printf in timer.c with assert
Return proper error codes from timer drivers
Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>
Timer subsystem initialization code in core/timer.c
Split the BIOS and RTDSC timer drivers from i386_timer.c
Split arch/i386/firmware/pcbios/bios.c into the RTSDC
timer driver and arch/i386/core/nap.c
Split the headers properly:
include/unistd.h - delay functions to be used by the
gPXE core and drivers.
include/gpxe/timer.h - the fimer subsystem interface
to be used by the timer drivers
and currticks() to be used by
the code gPXE subsystems.
include/latch.h - removed
include/timer.h - scheduled for removal. Some driver
are using currticks, which is
only for core subsystems.
Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>
RFC 4390 provides for the DHCP client identifier to contain the link-layer
hardware type and MAC address when the MAC address exceeds 16 bytes.
However, the hardware type field is only 8 bits; we were assuming 16 bits.
Arbel and Hermon cards both have multiple ports. Add the
infrastructure required to register each port as a separate IB
device. Don't yet register more than one port, since registration
will currently fail unless a valid link is detected.
Use ib_*_{set,get}_{drv,owner}data wrappers to access driver- and
owner-private data on Infiniband structures.
Pull out common code for handling management datagrams from arbel.c
and hermon.c into infiniband.c.
Add port number to struct ib_device.
Add open(), close() and mad() methods to struct ib_device_operations.
As written, if the if the UNDI ISR call clobbers the upper halves of
any of the GPRs (which by convention it is permitted to do, and by
paranoia should be expected to do) then nothing in the interrupt
handler will recover the state.
Additionally, save/restore %fs and %gs out of sheer paranoia - it's a
cheap enough operation, and may prevent problems due to poorly written
UNDI stacks.
Since we don't know what the UNDI code does, it is safest to
save/restore %eflags even though the lower half of %eflags is
automatically saved by the interrupt itself.
As written, if the if the UNDI ISR call clobbers the upper halves of
any of the GPRs (which by convention it is permitted to do, and by
paranoia should be expected to do) then nothing in the interrupt
handler will recover the state.
Additionally, save/restore %fs and %gs out of sheer paranoia - it's a
cheap enough operation, and may prevent problems due to poorly written
UNDI stacks.
Allow port numbers in iSCSI redirection.
Wait for SCSI status, not just the final data-in (which may be followed
by an explicit SCSI Response PDU if the S bit is not set).
stappers and xl0 pointed out that gnu make sets some variables, so ?=
is ineffective in some cases where we use it.. Cross-compilation
requires that some variables can be overridden in the
src/$(ARCH)/Config file, so include that file _after_ utility program
variables are set.
From: Geert Stappers <stappers@stappers.nl>
To: etherboot-developers@lists.sourceforge.net
Subject: [Etherboot-developers] 3c90x polling again [patch]
Date: Thu, 29 Nov 2007 09:22:36 +0100
User-Agent: Mutt/1.5.16 (2007-06-11)
Hello,
gPXE didn't work on 3COM 905C Tornado cards for me.
It did transmit the DHCP request, but it didn't see the DHCP offer.
Adding debug print statements allready solved the problem.
Attached is a patch that has a cleaner delay then print statements.
The core of it is
- for(i=0;i<40000;i++);
+ mdelay(1);
There was no research if the change is about a longer delay
or about code NOT being optimized away. It works for me :-)
Cheers
Geert Stappers
driver's probe() routine fills in in nic->irqno. This is so that
non-interrupt-capable legacy drivers which set nic->irqno=0 will end
up reporting IRQ#0 via PXENV_UNDI_GET_INFORMATION; this in turn means
that the calling PXE NBP will (should) hook the timer interrupt, and
everything will sort of work.
The e1000_irq() routine should (per mcb30) do enable on non-zero,
disable on zero. This is not consistent in all drivers, so I'll
wait to update it when doing a global sweep.
This needs to be done manually because if the irq() routine is
implemented then we want something like "nic->irqno = pci->irqno;",
else we do "nic->irqno = 0;" nic->ioaddr may also need to be set
carefully.
Also added local variables to end of many files, for emacs indentation
to match kernel style (tab does 8 space indent).
_textdata_link_addr, _load_addr and _max_align in the linker scripts.
A bug in some versions of ld causes segfaults if the DEFINED() macro
is used in a linker script *and* the -Map option to ld is present.
We don't currently need to override any of these values; if we need to
do so in future then the solution will probably be to always specify
the values on the ld command line, and have the linker script not
define them at all.
PXENV_GET_CACHED_INFO. If we dont do this, Altiris' NBP screws up; it
relies on being able to grab pointers to each of the three packets and
then read them at will later.
There may still be an issue with memory handling, since it seems to
die ungracefully when ARP packets come in after loading a kernel.
Something to debug.
We didn't specify values for MaxRecvDataSegmentLength and
MaxBurstLength (to save space, since we were happy with the
RFC-defined default values of 8kB and 256kB respectively). However,
the OpenSolaris target (incorrectly) assumes default values of zero
for these parameters.
The upshot was that the OpenSolaris target would get stuck in an
endless loop trying to send us the first 512-byte sector, zero bytes
at a time, and would eventually run out of memory and core-dump.
Fixed by explicitly specifying the default values for these two
parameters.
memory map. (We achieve this by setting CF on the last entry if it is
zero-length; this avoids the need to look ahead to see at each entry
if the *next* entry would be both the last entry and zero-length).
This fixes the "0kB base memory" error message upon starting Windows
2003 on a SunFire X2100.
memory map. (We achieve this by setting CF on the last entry if it is
zero-length; this avoids the need to look ahead to see at each entry
if the *next* entry would be both the last entry and zero-length).
This fixes the "0kB base memory" error message upon starting Windows
2003 on a SunFire X2100.
byte, rather than the number of permissible bytes (i.e. subtract one
from the value under the previous definition to get the value under
the new definition).
This avoids integer overflow on 64-bit kernels, where
bzhdr.initrd_addr_max may be 0xffffffffffffffff; under the old
behaviour we set mem_limit equal to initrd_addr_max+1, which meant it
ended up as zero. Kernel loads would fail with ENOBUFS.
Michael Brown
Marty Connor
Alexey Zaytsev
H. Peter Anvin