The RTC-based entropy source uses the nanosecond-scale CPU TSC to
measure the time between two 1kHz interrupts generated by the CMOS
RTC. In a physical machine these clocks are driven from independent
crystals, resulting in some observable clock drift. In a virtual
machine, the CMOS RTC is typically emulated using host-OS
constructions such as SIGALRM.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
PXENV_FILE_EXIT_HOOK is designed to allow ipxelinux.0 to unload both
the iPXE and pxelinux components without affecting the underlying PXE
stack. Unfortunately, it causes unexpected behaviour in other
situations, such as when loading a non-embedded pxelinux.0 via
undionly.kpxe. For example:
PXE ROM -> undionly.kpxe -> pxelinux.0 -> chain.c32 to boot hd0
would cause control to return to iPXE instead of booting from the hard
disk. In some cases, this would result in a harmless but confusing
"No more network devices" message; in other cases stranger things
would happen, such as being returned to the iPXE shell prompt.
The fundamental problem is that when pxelinux detects
PXENV_FILE_EXIT_HOOK, it may attempt to specify an exit hook and then
exit back to iPXE, assuming that iPXE will in turn exit cleanly via
the specified exit hook. This is not a valid assumption in the
general case, since the action of exiting back to iPXE does not
directly cause iPXE to exit itself. (In the specific case of
ipxelinux.0, this will work since the embedded script exits as soon as
pxelinux.0 exits.)
Fix the unexpected behaviour in the non-ipxelinux.0 cases by including
support for PXENV_FILE_EXIT_HOOK only when using a new .kkkpxe format.
The ipxelinux.0 build process should therefore now use undionly.kkkpxe
instead of undionly.kkpxe.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Very nasty things can happen if a NULL network device is used. Check
that pxe_netdev is non-NULL at the applicable entry points, so that
this type of problem gets reported to the caller rather than being
allowed to crash the system.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
All users of imgdownload() require registration of the image, so make
registration an integral part of imgdownload() itself and simplify the
"action" parameter to be one of image_select(), image_exec() et al.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow the link layer to directly report whether or not a packet is
multicast or broadcast at the time of calling pull(), rather than
relying on heuristics to determine this at a later stage.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow objects to support both streaming and block device protocols, by
starting streaming data only when the data transfer window opens.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This allows older versions of ELTORITO.SYS (such as the version found
on the FreeDOS installation CD-ROM) to use iPXE's emulated CD-ROM
drive.
Reported-by: Robin Smidsrød <robin@smidsrod.no>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Expose the multiple-SAN-drive capability of the iPXE core via the iPXE
command line by adding commands to hook and unhook additional drives.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Refactor the {load,exec} image operations as {probe,exec}. This makes
the probe mechanism cleaner, eliminates some forward declarations,
avoids holding magic state in image->priv, eliminates the possibility
of screwing up between the "load" and "exec" stages, and makes the
documentation simpler since the concept of "loading" (as distinct from
"executing") no longer needs to be explained.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
We currently use INT 13,00 as an opportunity to reopen the underlying
block device, which works well for callers such as DOS that will use
INT 13,00 in response to any disk errors. However, some callers (such
as Windows Server 2008) do not attempt to reset the disk, and so any
failures become effectively permanent.
Fix this by automatically reopening the underlying block device
whenever we might want to access it.
This makes direct installation of Windows to an iSCSI target much more
reliable.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Merge the "bus" and "devfn" fields into a single "busdevfn" field, to
match the format used by the majority of external code.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Remove the concept of shutdown exit flags, and replace it with a
counter used to keep track of exposed interfaces that require devices
to remain active.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The PXE debugging messages have remained pretty much unaltered since
Etherboot 5.4, and are now difficult to read in comparison to most of
the rest of iPXE.
Bring the pxe_udp debug messages up to normal iPXE standards.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Earlier versions of the PXE specification do not have the SubVendor_ID
and SubDevice_ID fields, and some NBPs may not provide space for them.
Avoid overwriting the contents of these fields, just in case.
This is similar to the problem with the BufferLimit field in
PXENV_GET_CACHED_INFO.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The disk signature is used by some OSes (notably Windows) to identify
the boot disk, so it's useful debugging information to have.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Support the extensions mandated by EDD 4.0, including:
o the ability to specify a flat physical address in a disk address
packet,
o the ability to specify a sector count greater than 127 in a disk
address packet,
o support for all functions within the Fixed Disk Access and EDD
Support subsets,
o the ability to describe a device using EDD Device Path Information.
This implementation is based on draft revision 3 of the EDD 4.0
specification, with reference to the EDD 3.0 specification. It is
possible that this implementation may need to change in order to
conform to the final published EDD 4.0 specification.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The block device interface used in gPXE predates the invention of even
the old gPXE data-transfer interface, let alone the current iPXE
generic asynchronous interface mechanism. Bring this old code up to
date, with the following benefits:
o Block device commands can be cancelled by the requestor. The INT 13
layer uses this to provide a global timeout on all INT 13 calls,
with the result that an unexpected passive failure mode (such as
an iSCSI target ACKing the request but never sending a response)
will lead to a timeout that gets reported back to the INT 13 user,
rather than simply freezing the system.
o INT 13,00 (reset drive) is now able to reset the underlying block
device. INT 13 users, such as DOS, that use INT 13,00 as a method
for error recovery now have a chance of recovering.
o All block device commands are tagged, with a numerical tag that
will show up in debugging output and in packet captures; this will
allow easier interpretation of bug reports that include both
sources of information.
o The extremely ugly hacks used to generate the boot firmware tables
have been eradicated and replaced with a generic acpi_describe()
method (exploiting the ability of iPXE interfaces to pass through
methods to an underlying interface). The ACPI tables are now
built in a shared data block within .bss16, rather than each
requiring dedicated space in .data16.
o The architecture-independent concept of a SAN device has been
exposed to the iPXE core through the sanboot API, which provides
calls to hook, unhook, boot, and describe SAN devices. This
allows for much more flexible usage patterns (such as hooking an
empty SAN device and then running an OS installer via TFTP).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iPXE has never supported SEEK_END; the usage of "whence" offers only
the options of SEEK_SET and SEEK_CUR and so is effectively a boolean
flag. Further flags will be required to support additional metadata
required by the Fibre Channel network model, so repurpose the "whence"
field as a generic "flags" field.
xfer_seek() has always been used with SEEK_SET, so remove the "whence"
field altogether from its argument list.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
pcbios specific get_memmap() is used by the b44 driver making
all-drivers builds fail on other platforms. Move it to the I/O API
group and provide a dummy implementation on EFI.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
COM32 binaries generally expect to run with interrupts
enabled. Syslinux does so, and COM32 programs will execute cli/sti
pairs when running a critical section, to provide mutual exclusion
against BIOS interrupt handlers. Previously, under iPXE, the IDT was
not valid, so any interrupt (e.g. a timer tick) would generally cause
the machine to triple fault.
This change introduces code to:
- Create a valid IDT at the same location that syslinux uses
- Create an "interrupt jump buffer", which contains small pieces of
code that simply record the vector number and jump to a common
handler
- Thunk down to real mode and execute the BIOS's interrupt handler
whenever an interrupt is received in a COM32 program
- Switch IDTs and enable/disable interrupts when context switching to
and from COM32 binaries
Testing done:
- Booted VMware ESX using a COM32 multiboot loader (mboot.c32)
- Built with GDBSERIAL enabled, and tested breakpoints on int22 and
com32_irq
- Put the following code in a COM32 program:
asm volatile ( "sti" );
while ( 1 );
Before this change, the machine would triple fault
immediately. After this change, it hangs as expected. Under Bochs,
it is possible to see the interrupt handler run, and the current
time in the BIOS data area gets incremented.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Remove data-xfer as an interface type, and replace data-xfer
interfaces with generic interfaces supporting the data-xfer methods.
Filter interfaces (as used by the TLS layer) are handled using the
generic pass-through interface capability. A side-effect of this is
that deliver_raw() no longer exists as a data-xfer method. (In
practice this doesn't lose any efficiency, since there are no
instances within the current codebase where xfer_deliver_raw() is used
to pass data to an interface supporting the deliver_raw() method.)
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Remove name-resolution as an interface type, and replace
name-resolution interfaces with generic interfaces supporting the
resolv_done() method.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
strerror() has not been able to use the PXE-only error table since
commit 9aa61ad ("Add per-file error identifiers") back in 2007.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This removes the need for inline safety wrappers, marginally reducing
the size penalty of weak functions, and works around an apparent
binutils bug that causes undefined weak symbols to not actually be
NULL when compiling with -fPIE (as EFI builds do).
A bug in versions of binutils prior to 2.16 (released in 2005) will
cause same-file weak definitions to not work with those
toolchains. Update the README to reflect our new dependency on
binutils >= 2.16.
Signed-off-by: Joshua Oreman <oremanj@rwcr.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
COMBOOT API calls set the carry flag on failure. This was not being
propagated because the COMBOOT interrupt handler used iret to return
with EFLAGS restored from the stack. This patch propagates CF before
returning from the interrupt.
Reported-by: Geoff Lywood <glywood@vmware.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Marty Connor <mdc@etherboot.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Microsoft WDS can end up calling PXENV_RESTART_TFTP to execute a
second-stage NBP which then exits. Specifically, wdsnbp.com uses
PXENV_RESTART_TFTP to execute pxeboot.com, which will exit if the user
does not press F12. iPXE currently treats PXENV_RESTART_TFTP as a
normal PXE API call, and so attempts to return to wdsnbp.com, which
has just been vaporised by pxeboot.com.
Use rmsetjmp/rmlongjmp to preserve the stack state as of the initial
NBP execution, and to restore this state immediately prior to
executing the NBP loaded via PXENV_RESTART_TFTP. This matches the
behaviour in the PXE spec (which says that "if TFTP is restarted,
control is never returned to the caller"), and allows pxeboot.com to
exit relatively cleanly back to iPXE.
As with all usage of setjmp/longjmp, there may be subtle corner case
bugs due to not gracefully unwinding any state accumulated by the time
of the longjmp call, but this seems to be the only viable way to
provide the specified behaviour.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Use the shared code in libflat to perform the A20 transitions
automatically on each transition from real to protected mode. This
allows us to remove all explicit calls to gateA20_set().
The old warnings about avoiding automatically enabling A20 are
essentially redundant; they date back to the time when we would always
start hammering the keyboard controller without first checking to see
if gate A20 was already enabled (which it almost always is).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Access to the gpxe.org and etherboot.org domains and associated
resources has been revoked by the registrant of the domain. Work
around this problem by renaming project from gPXE to iPXE, and
updating URLs to match.
Also update README, LOG and COPYRIGHTS to remove obsolete information.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown
Piotr Jaroszyński
Geoff Lywood
Joshua Oreman
Stefan Hajnoczi