diff --git a/src/drivers/net/smsc95xx.c b/src/drivers/net/smsc95xx.c
index c1dd08051..21e89a44d 100644
--- a/src/drivers/net/smsc95xx.c
+++ b/src/drivers/net/smsc95xx.c
@@ -687,6 +687,7 @@ static int smsc95xx_dump_statistics ( struct smsc95xx_device *smsc95xx ) {
  */
 static int smsc95xx_reset ( struct smsc95xx_device *smsc95xx ) {
 	uint32_t hw_cfg;
+	uint32_t led_gpio_cfg;
 	int rc;
 
 	/* Reset device */
@@ -706,6 +707,17 @@ static int smsc95xx_reset ( struct smsc95xx_device *smsc95xx ) {
 		return -ETIMEDOUT;
 	}
 
+	/* Configure LEDs */
+	led_gpio_cfg = ( SMSC95XX_LED_GPIO_CFG_GPCTL2_NSPD_LED |
+			 SMSC95XX_LED_GPIO_CFG_GPCTL1_NLNKA_LED |
+			 SMSC95XX_LED_GPIO_CFG_GPCTL0_NFDX_LED );
+	if ( ( rc = smsc95xx_writel ( smsc95xx, SMSC95XX_LED_GPIO_CFG,
+				      led_gpio_cfg ) ) != 0 ) {
+		DBGC ( smsc95xx, "SMSC95XX %p could not configure LEDs: %s\n",
+		       smsc95xx, strerror ( rc ) );
+		/* Ignore error and continue */
+	}
+
 	return 0;
 }
 
diff --git a/src/drivers/net/smsc95xx.h b/src/drivers/net/smsc95xx.h
index d66d86803..c2512e0ee 100644
--- a/src/drivers/net/smsc95xx.h
+++ b/src/drivers/net/smsc95xx.h
@@ -43,6 +43,18 @@ FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL );
 #define SMSC95XX_HW_CFG_BIR		0x00001000UL	/**< Bulk IN use NAK */
 #define SMSC95XX_HW_CFG_LRST		0x00000008UL	/**< Soft lite reset */
 
+/** LED GPIO configuration register */
+#define SMSC95XX_LED_GPIO_CFG 0x024
+#define SMSC95XX_LED_GPIO_CFG_GPCTL2(x)	( (x) << 24 )	/**< GPIO 2 control */
+#define SMSC95XX_LED_GPIO_CFG_GPCTL2_NSPD_LED \
+	SMSC95XX_LED_GPIO_CFG_GPCTL2 ( 1 )		/**< Link speed LED */
+#define SMSC95XX_LED_GPIO_CFG_GPCTL1(x)	( (x) << 20 )	/**< GPIO 1 control */
+#define SMSC95XX_LED_GPIO_CFG_GPCTL1_NLNKA_LED \
+	SMSC95XX_LED_GPIO_CFG_GPCTL1 ( 1 )		/**< Activity LED */
+#define SMSC95XX_LED_GPIO_CFG_GPCTL0(x)	( (x) << 16 )	/**< GPIO 0 control */
+#define SMSC95XX_LED_GPIO_CFG_GPCTL0_NFDX_LED \
+	SMSC95XX_LED_GPIO_CFG_GPCTL0 ( 1 )		/**< Full-duplex LED */
+
 /** EEPROM command register */
 #define SMSC95XX_E2P_CMD 0x030
 #define SMSC95XX_E2P_CMD_EPC_BSY	0x80000000UL	/**< EPC busy */