narenas
/
opengnsys_ipxe
mirror of https://github.com/ipxe/ipxe.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

[netdevice] Separate out the concept of hardware and link-layer addresses 

The hardware address is an intrinsic property of the hardware, while
the link-layer address can be changed at runtime.  This separation is
exposed via APIs such as PXE and EFI, but is currently elided by gPXE.

Expose the hardware and link-layer addresses as separate properties
within a net device.  Drivers should now fill in hw_addr, which will
be used to initialise ll_addr at the time of calling
register_netdev().
pull/1/head
Michael Brown 2009-08-11 20:19:53 +01:00
parent b3db99a38d
commit 37a0aab4ff
22 changed files with 71 additions and 82 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
src/arch/i386/drivers/net/undinet.c
View File

@ -689,7 +689,7 @@ int undinet_probe ( struct undi_device *undi ) {
if ( ( rc = undinet_call ( undinic, PXENV_UNDI_GET_INFORMATION,
&undi_info, sizeof ( undi_info ) ) ) != 0 )
goto err_undi_get_information;
memcpy ( netdev->ll_addr, undi_info.PermNodeAddress, ETH_ALEN );
memcpy ( netdev->hw_addr, undi_info.PermNodeAddress, ETH_ALEN );
undinic->irq = undi_info.IntNumber;
if ( undinic->irq > IRQ_MAX ) {
DBGC ( undinic, "UNDINIC %p invalid IRQ %d\n",
@ -697,7 +697,7 @@ int undinet_probe ( struct undi_device *undi ) {
goto err_bad_irq;
}
DBGC ( undinic, "UNDINIC %p is %s on IRQ %d\n",
undinic, eth_ntoa ( netdev->ll_addr ), undinic->irq );
undinic, eth_ntoa ( netdev->hw_addr ), undinic->irq );
/* Get interface information */
memset ( &undi_iface, 0, sizeof ( undi_iface ) );

6
src/arch/i386/interface/pxe/pxe_undi.c
View File

@ -421,15 +421,11 @@ PXENV_EXIT_t pxenv_undi_get_information ( struct s_PXENV_UNDI_GET_INFORMATION
undi_get_information->MaxTranUnit = ETH_MAX_MTU;
undi_get_information->HwType = ntohs ( ll_protocol->ll_proto );
undi_get_information->HwAddrLen = ll_protocol->ll_addr_len;
/* Cheat: assume card is always configured with its permanent
* node address. This is a valid assumption within Etherboot
* at the time of writing.
*/
memcpy ( &undi_get_information->CurrentNodeAddress,
pxe_netdev->ll_addr,
sizeof ( undi_get_information->CurrentNodeAddress ) );
memcpy ( &undi_get_information->PermNodeAddress,
pxe_netdev->ll_addr,
pxe_netdev->hw_addr,
sizeof ( undi_get_information->PermNodeAddress ) );
undi_get_information->ROMAddress = 0;
/* nic.rom_info->rom_segment; */

2
src/drivers/net/3c90x.c
View File

@ -928,7 +928,7 @@ static int a3c90x_probe(struct pci_device *pci,
/* load eeprom contents to inf_3c90x->eeprom */
a3c90x_internal_ReadEepromContents(inf_3c90x);
HWAddr = netdev->ll_addr;
HWAddr = netdev->hw_addr;
/* Retrieve the Hardware address */
HWAddr[0] = inf_3c90x->eeprom[eepromHwAddrOffset + 0] >> 8;

12
src/drivers/net/b44.c
View File

@ -594,12 +594,12 @@ static void b44_load_mac_and_phy_addr(struct b44_private *bp)
/* Load MAC address, note byteswapping */
b44_read_eeprom(bp, &eeprom[0]);
bp->netdev->ll_addr[0] = eeprom[79];
bp->netdev->ll_addr[1] = eeprom[78];
bp->netdev->ll_addr[2] = eeprom[81];
bp->netdev->ll_addr[3] = eeprom[80];
bp->netdev->ll_addr[4] = eeprom[83];
bp->netdev->ll_addr[5] = eeprom[82];
bp->netdev->hw_addr[0] = eeprom[79];
bp->netdev->hw_addr[1] = eeprom[78];
bp->netdev->hw_addr[2] = eeprom[81];
bp->netdev->hw_addr[3] = eeprom[80];
bp->netdev->hw_addr[4] = eeprom[83];
bp->netdev->hw_addr[5] = eeprom[82];
/* Load PHY address */
bp->phy_addr = eeprom[90] & 0x1f;

2
src/drivers/net/e1000/e1000.c
View File

@ -853,7 +853,7 @@ e1000_probe ( struct pci_device *pdev,
if ( e1000_read_mac_addr ( &adapter->hw ) )
DBG ( "EEPROM Read Error\n" );
memcpy ( netdev->ll_addr, adapter->hw.mac_addr, ETH_ALEN );
memcpy ( netdev->hw_addr, adapter->hw.mac_addr, ETH_ALEN );
/* print bus type/speed/width info */
{

2
src/drivers/net/etherfabric.c
View File

@ -4181,7 +4181,7 @@ efab_probe ( struct pci_device *pci,
if ( rc )
goto fail3;
memcpy ( netdev->ll_addr, efab->mac_addr, ETH_ALEN );
memcpy ( netdev->hw_addr, efab->mac_addr, ETH_ALEN );
netdev_link_up ( netdev );
rc = register_netdev ( netdev );

66
src/drivers/net/ipoib.c
View File

@ -608,27 +608,24 @@ static struct net_device_operations ipoib_operations = {
};
/**
* Update IPoIB dynamic Infiniband parameters
* Handle link status change
*
* @v ipoib IPoIB device
*
* The Infiniband port GID and partition key will change at runtime,
* when the link is established (or lost). The MAC address is based
* on the port GID, and the broadcast GID is based on the partition
* key. This function recalculates these IPoIB device parameters.
* @v ibdev Infiniband device
*/
static void ipoib_set_ib_params ( struct ipoib_device *ipoib ) {
struct ib_device *ibdev = ipoib->ibdev;
struct net_device *netdev = ipoib->netdev;
struct ipoib_mac *mac;
void ipoib_link_state_changed ( struct ib_device *ibdev ) {
struct net_device *netdev = ib_get_ownerdata ( ibdev );
struct ipoib_device *ipoib = netdev->priv;
struct ipoib_mac *mac = ( ( struct ipoib_mac * ) netdev->ll_addr );
int rc;
/* Calculate GID portion of MAC address based on port GID */
mac = ( ( struct ipoib_mac * ) netdev->ll_addr );
memcpy ( &mac->gid, &ibdev->gid, sizeof ( mac->gid ) );
/* Leave existing broadcast group */
ipoib_leave_broadcast_group ( ipoib );
/* Calculate broadcast GID based on partition key */
memcpy ( &ipoib->broadcast, &ipoib_broadcast,
sizeof ( ipoib->broadcast ) );
/* Update MAC address based on potentially-new GID prefix */
memcpy ( &mac->gid.u.half[0], &ibdev->gid.u.half[0],
sizeof ( mac->gid.u.half[0] ) );
/* Update broadcast GID based on potentially-new partition key */
ipoib->broadcast.gid.u.words[2] = htons ( ibdev->pkey );
/* Set net device link state to reflect Infiniband link state */
@ -637,25 +634,6 @@ static void ipoib_set_ib_params ( struct ipoib_device *ipoib ) {
} else {
netdev_link_down ( netdev );
}
}
/**
* Handle link status change
*
* @v ibdev Infiniband device
*/
void ipoib_link_state_changed ( struct ib_device *ibdev ) {
struct net_device *netdev = ib_get_ownerdata ( ibdev );
struct ipoib_device *ipoib = netdev->priv;
int rc;
/* Leave existing broadcast group */
ipoib_leave_broadcast_group ( ipoib );
/* Update MAC address and broadcast GID based on new port GID
* and partition key.
*/
ipoib_set_ib_params ( ipoib );
/* Join new broadcast group */
if ( ib_link_ok ( ibdev ) &&
@ -675,6 +653,7 @@ void ipoib_link_state_changed ( struct ib_device *ibdev ) {
int ipoib_probe ( struct ib_device *ibdev ) {
struct net_device *netdev;
struct ipoib_device *ipoib;
struct ipoib_mac *mac;
int rc;
/* Allocate network device */
@ -685,16 +664,19 @@ int ipoib_probe ( struct ib_device *ibdev ) {
ipoib = netdev->priv;
ib_set_ownerdata ( ibdev, netdev );
netdev->dev = ibdev->dev;
netdev->ll_broadcast = ( ( uint8_t * ) &ipoib->broadcast );
memset ( ipoib, 0, sizeof ( *ipoib ) );
ipoib->netdev = netdev;
ipoib->ibdev = ibdev;
/* Calculate as much of the broadcast GID and the MAC address
* as we can. We won't know either of these in full until we
* have link-up.
*/
ipoib_set_ib_params ( ipoib );
/* Extract hardware address */
mac = ( ( struct ipoib_mac * ) netdev->hw_addr );
memcpy ( &mac->gid.u.half[1], &ibdev->gid.u.half[1],
sizeof ( mac->gid.u.half[1] ) );
/* Set default broadcast address */
memcpy ( &ipoib->broadcast, &ipoib_broadcast,
sizeof ( ipoib->broadcast ) );
netdev->ll_broadcast = ( ( uint8_t * ) &ipoib->broadcast );
/* Register network device */
if ( ( rc = register_netdev ( netdev ) ) != 0 )

2
src/drivers/net/legacy.c
View File

@ -99,7 +99,7 @@ int legacy_probe ( void *hwdev,
set_drvdata ( hwdev, netdev );
netdev->dev = dev;
nic.node_addr = netdev->ll_addr;
nic.node_addr = netdev->hw_addr;
nic.irqno = dev->desc.irq;
if ( ! probe ( &nic, hwdev ) ) {

2
src/drivers/net/mtnic.c
View File

@ -1814,7 +1814,7 @@ mtnic_probe(struct pci_device *pci,
/* Program the MAC address */
mac = priv->mtnic->fw.mac[port_index];
for (mac_idx = 0; mac_idx < MAC_ADDRESS_SIZE; ++mac_idx) {
mtnic->netdev[port_index]->ll_addr[MAC_ADDRESS_SIZE - mac_idx - 1] = mac & 0xFF;
mtnic->netdev[port_index]->hw_addr[MAC_ADDRESS_SIZE - mac_idx - 1] = mac & 0xFF;
mac = mac >> 8;
}

2
src/drivers/net/natsemi.c
View File

@ -204,7 +204,7 @@ static int natsemi_probe (struct pci_device *pci,
last = prev_bytes[1] >> 7;
for ( i = 0 ; i < ETH_ALEN ; i++ ) {
last1 = ll_addr_encoded[i] >> 7;
netdev->ll_addr[i] = ll_addr_encoded[i] << 1 | last;
netdev->hw_addr[i] = ll_addr_encoded[i] << 1 | last;
last = last1;
}

10
src/drivers/net/phantom/phantom.c
View File

@ -1897,10 +1897,10 @@ static int phantom_init_cmdpeg ( struct phantom_nic *phantom ) {
* Read Phantom MAC address
*
* @v phanton_port Phantom NIC
* @v ll_addr Buffer to fill with MAC address
* @v hw_addr Buffer to fill with MAC address
*/
static void phantom_get_macaddr ( struct phantom_nic *phantom,
uint8_t *ll_addr ) {
uint8_t *hw_addr ) {
union {
uint8_t mac_addr[2][ETH_ALEN];
uint32_t dwords[3];
@ -1917,11 +1917,11 @@ static void phantom_get_macaddr ( struct phantom_nic *phantom,
/* Copy out the relevant MAC address */
for ( i = 0 ; i < ETH_ALEN ; i++ ) {
ll_addr[ ETH_ALEN - i - 1 ] =
hw_addr[ ETH_ALEN - i - 1 ] =
u.mac_addr[ phantom->port & 1 ][i];
}
DBGC ( phantom, "Phantom %p MAC address is %s\n",
phantom, eth_ntoa ( ll_addr ) );
phantom, eth_ntoa ( hw_addr ) );
}
/**
@ -2045,7 +2045,7 @@ static int phantom_probe ( struct pci_device *pci,
goto err_init_rcvpeg;
/* Read MAC addresses */
phantom_get_macaddr ( phantom, netdev->ll_addr );
phantom_get_macaddr ( phantom, netdev->hw_addr );
/* Skip if boot disabled on NIC */
if ( ( rc = phantom_check_boot_enable ( phantom ) ) != 0 )

2
src/drivers/net/pnic.c
View File

@ -250,7 +250,7 @@ static int pnic_probe ( struct pci_device *pci,
/* Get MAC address */
status = pnic_command ( pnic, PNIC_CMD_READ_MAC, NULL, 0,
netdev->ll_addr, ETH_ALEN, NULL );
netdev->hw_addr, ETH_ALEN, NULL );
/* Mark as link up; PNIC has no concept of link state */
netdev_link_up ( netdev );

4
src/drivers/net/r8169.c
View File

@ -2209,9 +2209,9 @@ rtl8169_probe ( struct pci_device *pdev, const struct pci_device_id *ent )
/* Get MAC address */
for ( i = 0; i < MAC_ADDR_LEN; i++ )
netdev->ll_addr[i] = RTL_R8 ( MAC0 + i );
netdev->hw_addr[i] = RTL_R8 ( MAC0 + i );
DBG ( "%s\n", eth_ntoa ( netdev->ll_addr ) );
DBG ( "%s\n", eth_ntoa ( netdev->hw_addr ) );
rtl8169_init_phy ( netdev, tp );

2
src/drivers/net/rtl8139.c
View File

@ -525,7 +525,7 @@ static int rtl_probe ( struct pci_device *pci,
/* Reset the NIC, set up EEPROM access and read MAC address */
rtl_reset ( netdev );
rtl_init_eeprom ( netdev );
nvs_read ( &rtl->eeprom.nvs, EE_MAC, netdev->ll_addr, ETH_ALEN );
nvs_read ( &rtl->eeprom.nvs, EE_MAC, netdev->hw_addr, ETH_ALEN );
/* Mark as link up; we don't yet handle link state */
netdev_link_up ( netdev );

2
src/drivers/net/rtl818x/rtl818x.c
View File

@ -813,7 +813,7 @@ static int rtl818x_probe(struct pci_device *pdev,
free(hwinfo);
DBG("rtl818x: Realtek RTL818%s (RF chip %s) with address %s\n",
chip_name, priv->rf->name, netdev_hwaddr(dev->netdev));
chip_name, priv->rf->name, netdev_addr(dev->netdev));
return 0;

4
src/drivers/net/sky2.c
View File

@ -2210,14 +2210,14 @@ static struct net_device *sky2_init_netdev(struct sky2_hw *hw,
sky2->port = port;
/* read the mac address */
memcpy(dev->ll_addr, (void *)(hw->regs + B2_MAC_1 + port * 8), ETH_ALEN);
memcpy(dev->hw_addr, (void *)(hw->regs + B2_MAC_1 + port * 8), ETH_ALEN);
return dev;
}
static void sky2_show_addr(struct net_device *dev)
{
DBG2(PFX "%s: addr %s\n", dev->name, netdev_hwaddr(dev));
DBG2(PFX "%s: addr %s\n", dev->name, netdev_addr(dev));
}
#if DBGLVL_MAX

15
src/include/gpxe/netdevice.h
View File

@ -254,9 +254,16 @@ struct net_device {
/** Link-layer protocol */
struct ll_protocol *ll_protocol;
/** Hardware address
*
* This is an address which is an intrinsic property of the
* hardware, e.g. an address held in EEPROM.
*/
uint8_t hw_addr[MAX_LL_ADDR_LEN];
/** Link-layer address
*
* For Ethernet, this is the MAC address.
* This is the current link-layer address assigned to the
* device. It can be changed at runtime.
*/
uint8_t ll_addr[MAX_LL_ADDR_LEN];
/** Link-layer broadcast address */
@ -337,12 +344,12 @@ static inline void netdev_nullify ( struct net_device *netdev ) {
}
/**
* Get printable network device hardware address
* Get printable network device link-layer address
*
* @v netdev Network device
* @ret name Hardware address
* @ret name Link-layer address
*/
static inline const char * netdev_hwaddr ( struct net_device *netdev ) {
static inline const char * netdev_addr ( struct net_device *netdev ) {
return netdev->ll_protocol->ntoa ( netdev->ll_addr );
}

2
src/interface/efi/efi_snp.c
View File

@ -130,7 +130,7 @@ static void efi_snp_set_mode ( struct efi_snp_device *snpdev ) {
assert ( ll_addr_len <= sizeof ( mode->CurrentAddress ) );
memcpy ( &mode->CurrentAddress, netdev->ll_addr, ll_addr_len );
memcpy ( &mode->BroadcastAddress, netdev->ll_broadcast, ll_addr_len );
memcpy ( &mode->PermanentAddress, netdev->ll_addr, ll_addr_len );
memcpy ( &mode->PermanentAddress, netdev->hw_addr, ll_addr_len );
mode->IfType = ntohs ( netdev->ll_protocol->ll_proto );
mode->MacAddressChangeable = TRUE;
mode->MediaPresentSupported = TRUE;

2
src/net/80211/net80211.c
View File

@ -792,7 +792,7 @@ int net80211_register ( struct net80211_device *dev,
return -ENOMEM;
memcpy ( dev->hw, hw, sizeof ( *hw ) );
memcpy ( dev->netdev->ll_addr, hw->hwaddr, ETH_ALEN );
memcpy ( dev->netdev->hw_addr, hw->hwaddr, ETH_ALEN );
/* Set some sensible channel defaults for driver's open() function */
memcpy ( dev->channels, dev->hw->channels,

6
src/net/netdevice.c
View File

@ -357,6 +357,10 @@ int register_netdev ( struct net_device *netdev ) {
snprintf ( netdev->name, sizeof ( netdev->name ), "net%d",
ifindex++ );
/* Set initial link-layer address */
memcpy ( netdev->ll_addr, netdev->hw_addr,
netdev->ll_protocol->ll_addr_len );
/* Register per-netdev configuration settings */
if ( ( rc = register_settings ( netdev_settings ( netdev ),
NULL ) ) != 0 ) {
@ -370,7 +374,7 @@ int register_netdev ( struct net_device *netdev ) {
list_add_tail ( &netdev->list, &net_devices );
DBGC ( netdev, "NETDEV %p registered as %s (phys %s hwaddr %s)\n",
netdev, netdev->name, netdev->dev->name,
netdev_hwaddr ( netdev ) );
netdev_addr ( netdev ) );
return 0;
}

2
src/usr/dhcpmgmt.c
View File

@ -48,7 +48,7 @@ int dhcp ( struct net_device *netdev ) {
return rc;
/* Perform DHCP */
printf ( "DHCP (%s %s)", netdev->name, netdev_hwaddr ( netdev ) );
printf ( "DHCP (%s %s)", netdev->name, netdev_addr ( netdev ) );
if ( ( rc = start_dhcp ( &monojob, netdev ) ) == 0 )
rc = monojob_wait ( "" );

2
src/usr/ifmgmt.c
View File

@ -89,7 +89,7 @@ static void ifstat_errors ( struct net_device_stats *stats,
void ifstat ( struct net_device *netdev ) {
printf ( "%s: %s on %s (%s)\n"
" [Link:%s, TX:%d TXE:%d RX:%d RXE:%d]\n",
netdev->name, netdev_hwaddr ( netdev ), netdev->dev->name,
netdev->name, netdev_addr ( netdev ), netdev->dev->name,
( ( netdev->state & NETDEV_OPEN ) ? "open" : "closed" ),
( netdev_link_ok ( netdev ) ? "up" : "down" ),
netdev->tx_stats.good, netdev->tx_stats.bad,