There is a corner case in which a target NTFS filesystem is already
shrunken. When this happens ntfsresize text output parsing breaks.
Check when ntfsresize reports nothing to do, warn the user about this
and stop the dry-run ntfsresize loop.
_extend_ntfsresize contains an incorrect variable name inside
subprocess.run referring the resize command value.
Simplify this variable name inside each specific _extend_* function:
s/cmd_resize2fs/cmd
s/cmd_ntfsresize/cmd
Remove unnecessary InventarioSoftware invocation inside image_create
operation. Software inventory is executed after image creation
(see ogRest.py).
Remove legacy 'path' parameter. This parameter was used to specify the
path of a text file in which legacy bash scripts wrote the software
inventory of the client (something like "Csft-{ip}...").
Fixes: 04bb35bd86 ("live: rewrite software inventory")
Fixes: 2e3d47b7b8 ("Avoid writting /software output to a file")
Don't raise exception if any windows program is missing DisplayName
node in the windows registry.
This attribute/node should contain the program's name. This name is used
as the package's name in the software set (software inventory).
This patch should be considered a hotfix, python-hivex does not report
any helpful message about this error.
(2023-05-09 14:43:13) ogClient: [ERROR] - Unexpected error
Traceback (most recent call last):
[...]
RuntimeError: Success
Before this patch, image creation *might* fail because it cannot create
the software inventory associated with the image due to the previously
described error. The software inventory is part of the response payload
of the image creation command (see src/ogRest:image_create).
Fixes: 04bb35bd86 (live: rewrite software inventory)
Add optional 'operation' parameter to _poweroff_oglive function.
Reuse _poweroff_oglive code before the busybox subprocess when rebooting
an ogLive client.
Replace legacy bash script /opt/opengnsys/client/scripts/poweroff with a
Python native solution.
Use subprocess module for any required external program when shutting
down a client. ethtool is used to ensure WoL setting is correct before
shutting down.
ogLive does not properly use a init system so busybox is used when
shutting down the system. In other live environments poweroff operation
just calls /sbin/poweroff.
Add utility function to unmount any mountpoint present in the /mnt
folder.
This function is a simplified version of the legacy bash function
ogUnmountAll used in several operations.
Drop subprocess call to bash function ogExtendFs. Use a native python
solution with subprocess calls to the required underlying tools.
Use get_filesystem_type to get the present filesystem from a partition
and call the corresponding filesystem grow function.
Filesystem specific functions are declared "_extend_{filesystem}" and
should not be imported elsewhere.
Each filesystem specific function wraps a subprocess call to the
required underlying program:
- NTFS filesystems: "ntfsresize -f [partition]"
- ext4 filesystems: "resize2fs -f [partition]"
Set NTFS related subprocess stdin to 'y' because human input cannot be
unset with other ntfsresize parameters.
Drop subprocess call to bash function ogReduceFs. Use a native python
solution with subprocess calls to the required underlying tools.
Use get_filesystem_type to get the filesystem from a partition and call
the corresponding supported filesystem shrink function.
Filesystem specific functions are declared "_reduce_{filesystem}" and
should not be imported elsewhere.
In case of NTFS filesystems, the output of 'ntfsresize' is processed
directly. This is dirty, but we can expect no changes to the output
strings if we read the following comment in the nftsresize.c source
code:
https://github.com/tuxera/ntfs-3g/blob/edge/ntfsprogs/ntfsresize.c#L12
ntfsresize requires to do previous dry-run executions to confirm
that the resizing is possible.
If a dry-run fails but a 10% increase in size is still smaller than
original filesystem then retry the operation until dry-run reports
sucess or the size increase is bigger than original.
If resizing to a smaller ntfs filesystem is not possible then ogReduceFs
will do nothing.
Replace legacy shell script InventarioHardware for helper functions
from hw_inventory.py
Use get_hardware_inventory to obtain a HardwareInventory object with
the hardware information. Map the HardwareInventory object to a legacy
response string with the legacy_list_hardware_inventory function.
Remove "Chrd-*" file reading logic, it's no longer needed. Legacy shell
script InventarioHardware uses that file.
Expect a change in the structure of hardware inventory response payload
in the future. This patch does not address the HTTP response containing
the hardware inventory as a '\n' separated string of hardware elements.
hw_inventory.py defines classes and helpers functions enabling
fetching of hardware inventory from a running client.
Uses a subprocess call to the command 'lshw -json' to obtain hardware
information.
Relevant public functions:
> get_hardware_inventory()
Main function encapsulating subprocess and output processing
logic.
Returns a HardwareInventory object.
> legacy_list_hardware_inventory(inventory)
Legacy string representation of parameter HardwareInventory object
Rename software inventory file to sw_inventory to better distinguish
it from a future hardware inventory code.
In the future sw_inventory and hw_inventory might be merged together
once each file is tidied up.
Replace legacy bash script in favor of Python code. Improves error
traceability and further development.
The software inventory operation mounts the target partition and it
fetches the list of installed software (package set). Once the
operation is complete, it unmounts the target partition.
For Windows, introduce hivex library python bindings for accessing
Windows registry hive files (https://libguestfs.org/hivex.3.html).
This operation is still processed by legacy code in the server side
(ogAdmServer.c in ogServer). Legacy backend process expects the software
inventory like the following example:
"software": "Windows 10 Enterprise Evaluation 2004 \nIntel(R) Network Connections 24.0.0.11 24.0.0.11 ..."
The os name is inserted first in this list followed by a '\n' separated
string of the software packages.
The legacy server code can be found in function actualizaSoftware at
ogServer/src/ogAdmServer.c
It is expected for software inventory payload to change in the future to
a simpler solution using just a json array of strings.
Add missing samba credentials parameter in ogChangeRepo invocation.
Credentials are loaded from ogClient config file.
Any production deployment should use its own samba user and password.
ogChangeRepo fails when using default samba credentials in a production
environment.
Fixes: a1edbe904b ("legacy: rewrite ogChangeRepo")
Fixes: 3703fd6063 ("live: support native unicast cache image restore")
Removes undefined 'repo' variable from error logging message.
This caused the traceback to be polluted with an unhelpful message
about this variable being undefined.
Fixes: 3703fd606 ("live: support native unicast cache image restore")
Adds linux swap partition type, mapped to the 'LINUX-SWAP' string in web
interfaces like ogCP or webconsole.
Fixes: 29c53e54e9 ("live: add parttypes.py")
Capture all possible Python exceptions in the try/except block of every
opengnsys operation.
Create an error handling function to deduplicate code in the except
block. The error handling function resets the ogRest state to IDLE and
sends the corresponding 500 Internal Server Error.
This *does not cover* every possible error. There are functions inside
ogThread which contain code that may raise errors that are not covered
by any try/except block.
Remove unnecesary root logger constant: LOGGER
The root logger is used by default when executing:
logging.debug()
logging.info()
logging.warning()
...
There is no point in doing:
LOGGER = logging.getLogger() # Get root logger
LOGGER.debug() # Use root logger
Change the name of the helper functions used when getting opengnsys
image information (legacy ogGetImageInfo bash script). As of now the
process consist of decompressing the image file with lzop and feeding
that output to partclone.info.
Prefer a more explicit function name rather than "process_image_*"
Add comment about skipping the first two lines of partclone.info output.
Usually, partclone.info starts printing out these two lines that are not
related to the partclone image information:
Partclone v0.3.23 http://partclone.org
Showing info of image (-)
As long as partclone.info output doesn't change we'll be fine, but we
should not depend on human readable output. This might change in the
future (i.e. adding json output format to partclone.info).
Rewrites this legacy script behavior using native Python code, using
subprocess module when executing programs like partclone.info or lzop
ogGetImageInfo is a bash script that retrieves information regarding an
OpenGnsys partition image, specifically:
- clonator
- compressor
- filesystem
- datasize (size of the partition image)
This rewrite only supports partclone and lzop compressed images. This is
standard behavior, we have no reports of other programs or compression
algorithms in use.
Keep this legacy function with hungarian notation to emphasize this is
still a legacy component that may be replaced in the future.
Drop ogChangeRepo Bash script in favor of a native Python
approach. Use only necessary subprocess calls instead of bringing
all the logic of this function into a Bash script black box.
ogChangeRepo unmounts the current OpenGnsys image samba folder
(/opt/opengnsys/images) and mounts (connects to) a new directory using
the new provided ip address. Keeping access mode from previous mount.
If anything goes wrong when mounting the new directory, it will fallback
to mounting the previous directory.
If no previous OpenGnsys image samba directory is detected, this
functions tries to mount the new directory anyway. In this case,
it will raise CalledProcessError if something goes wrong.
Rewrites the setup operation using python-libfdisk module instead of an
external bash script. Consolidating the operation into Python's code,
limiting external subprocesses to well known programs and small
concrete tasks that are difficult to fully integrate into Python.
Use parttypes.py to fetch partition types from python-libfdisk module.
Use fs.py to create any specified supported filesystem.
OpenGnsys cache partitions are created labelling the partition as
"CACHE". Stops setting non-standard MBR hexcode (0xca) to the cache
partition in addition to the filesystem label.
Any partition specified as type EMPTY will be ignored.
init_cache() creates the default directory in which OpenGnsys stores
images when using any cache enabled transfer method.
As of this commit this folder must exist for tiptorrent.py to
work properly.
Subprocess Popen object inside tiptorrent.py use
'cwd' optional parameter like:
cwd='/opt/opengnsys/cache/opt/opengnsys/images/'
This folder convention might change in the future.
Adds utility module which wraps several mkfs.* calls as a subprocess.
The main utility function is mkfs(fs, disk, partition, label), which
subsequently calls the corresponding mkfs_*(partition_device) function.
mkfs() supports specifying a drive label where supported.
Other modules using fs.py should call mkfs() only.
Adds parttypes.py module with utility functions to get partition types
(parttypes) from python-libfdisk.
Supports standard partition types, either DOS or GPT.
DOS labels use a hex code to define partition types, python-libfdisk
exposes get_parttype_from_code to look up for DOS partition types from a
given hexcode.
GPT label uses a string (UUID) for each supported partition type,
python-libfdisk exposes get_parttype_from_string to look up for GPT
partition types from a given string.
Clients running in ogLive can show log messages via a lighttp server.
Particularly, a html page named "real time log" consists of <text-area>
tags with the contents of two particular text files
/tmp/session.log and /tmp/command.log
Adds a Python logging handler in order to write ogClient log messages
into /tmp/session.log. This way ogClient logs are show in the "real time
log" html page too.
Clears content of blue text areas in the real time log view before
executing a restore image operation.
Adds private function _ogbrowser_clear_logs, this function writes to a
couple of text files present in the ogLive environment.
The contents of this file are printed out to the blue text areas
in the "real time log" view.
Fix error paths in live operations which do not
reset the "browser" to the main page (one with the menu).
Add error logging messages when:
* _restartBrowser fails.
* ogChangeRepo fails.
Improve checksum fetch error handling. For example, when an invalid
repository IP is specified.
UNICAST-CACHE consist of:
1. Checking if the target image is already present at the opengnsys
cache partition. If so, check for integrity (local and remote
checksum). If the image is not present in the cache partition,
download the target image into it.
2. Restore the image from cache partition.
This commit add support for this operation natively from ogClient
Python's code.
Specifies the image path in the lzop subprocess string.
It might be interesting to study efficient mechanisms to read large
binary files in python before using open() with default parameters for
buffered binary reading.
Integrates image restore command into native ogClient code. Further
reduces the need for external Bash scripts.
After a succesful image restore, OS configuration is still using
external Bash script "osConfigure/osConfigureCustom".
ogCopyEfiBootloader is an invalid legacy bash function name.
Rename to the correct function name 'ogCopyEfiBootLoader' and
rename utility python wrapper too.
Fixes: 0bd037c1a409c65fbcb01355ee0dd6dca770330e
Do not return the subprocess result for ogReduceFs/ogExtendFs.
ogReduceFs works with or without the target filesystem mounted.
ogExtendFs requires the target filesystem to be mounted.
'ogMount' legacy script invocation should be replaced by a better
mount/umount wrapper.
Use legacy script that saves the Windows-specific content from the ESP
to the image target filesystem.
Current image restore solution from OpenGnsys scripts expect the EFI
partition to be stored in the target system partition. (Only for Windows
10)
For example, storing the ESP in the NTFS partition of a Windows image.
Expect use of bash script ogCopyEfiBootloader until further
integration is merged.
Integrates some parts of this operation into native code, eg: the md5
checksum computation.
Wraps non native processes and commands using the subprocess module.
For example, legacy.py stores bash commands pending integration.
Supports python >=3.6, expected until more modern ogLives are put into
production environments.
Enables details in libfidsk context constructor call. Ensures size are
displayed as bytes (and not as a human readable string).
Avoids further arithmetical errors (e.g: converting from bytes to KB)
parseGetConf was necessary for parsing output from OpenGnsys
script "getConfiguration", which has been replaced since commit
1ab981a539 ("live: replace getConfiguration with refresh")
Adds new logging handler redirecting messages to the log file
located in the Samba shared directory (applies to live mode
clients, i.e: ogLive)
Parses log level configuration from ogclient.json. See:
{
"opengnsys": {
...
"log": "INFO",
...
}
...
}
Adds --debug option to set root logger level to DEBUG when starting
ogClient. Overrides log level from config file.
In addition:
- Replaces any occurence of print with a corresponding logging function.
- Unsets log level for handlers, use root logger level instead.
- Default level for root logger is INFO.
- Replaces level from response log messages to debug (ogRest)
Old refresh was a wrapper around getConfiguration bash script.
New refresh operation does what getConfiguration used to do
externally. See commit 097769b971.
Jose M. Guisado
Javier Sánchez Parra